6G Celicas Forums

cool lemme know need to get a set here pretty quick

door panels??

Im interested in the clear front turns, center rear and possibly the sidemarkers.. what would that convert to in US$?

Proly will just have to order brand new but checking here first.

Need a set of door panels, prefer the premium sound ones. The plastic map pocket at the bottom can be a little scuffed cuz that's gonna get painted but the foam etc has to be as close to perfect as possible.

Lemme know if anyone has an extra set

thanks
Matt

Awesome project playr!! reminds me of a few of my past ones =) Looking forward to seeing how this comes out!! good luck and great job so far!!

So looking for people that have had there turbos rebuilt, need to send mine off and get it overhauled. Mainly interested in where you sent yours, time, price and how happy you where with the end result.

I've also been kicking around the idea of picking up a rebuilt long or short block and looking for suggestions and feedback on places

thanks in advance
Matt

just putting it out there, the shop I work for now has a side business that is a silk screening company. There work is TOP NOTCH and been doing it for 10 plus years they can do just about anything possible. Guess this is ment mostly for Coomer but could get some pretty cool shirts in the work if anyone was interested

hey dustin are you talking about the single one on the left side of the guage cluster?? and the triple one above the center console?? sorry didn't read threw the entire topic, but I'm down for both if there the same ones shown in the pics at the beginning of the topic

front bumper by chance??

Hey guys already found what I need so guess this thread is good as done =) unless anyone has a 404 rear lip sittin around?? need one of them too =)

ajmorris1977 - what condition? can you supply pics?

Taking my lambo doors off and want stock hinges.. one of the gas shocks needs to be replaced but will trade for shipping cost and stock hinges

Also need stock side mirrors.. will trade what I have of the JDM folding ones, the pass side gear is missing a few teeth, could be replaced with an new gear just have not gotten around to ever doing it. There is a small chip out of the housing for the mirror (part where it meets the door). I'm pretty sure I still have the control switch for this but not 100% sure I've moved several times since I mess with any of this last lol

I also am willing to just buy these if anyone has them laying around

I'll see if I can find a diagram of the gaskets online somewhere and compare them =) thanks guys!

ok thanks =) issue of it bolting up or just space due to head/valve cover etc??

First off whats going on everyone?? been a while since I've been around and want to say hi to everyone new and old =)

After a couple year break on the 99 getting ready to do a complete tear down and rebuild.. got some awesome ideas on it! =)

Even tho I've owned both motors at the same time I never even thought to check if this would work and wondering if anyone has tried it. the motors basically share the same block so figure the intake manifold off the 3s would bolt up with little to no mods, assuming that it bolts up would it even clear the valve cover?? This is for a 5sfte project so I think it would help some with airflow etc plus honestly it looks cooler lol

Just wanted to say Hi to everyone! been along time since I've stopped by and the site still looks great!!!
I still got the 99 but haven't done a thing to it and thinking of selling sometime here
anyways check this game out if your bored. it's pretty fun http://kungwongpow.mybrute.com

have you had any issues with scraping? I've been kicking around redoing my exhaust.. the Greddy one has pretty much seen it's better days and it time to bump it up for the 5sfte project. however I can't decide if I wanna run under or over the axle. thought if I could cut out a little bit of the spare tire area and weld in a new piece of sheet metal I could get 3 inch in there. But if it can fit under the axle that makes life alot easier =)

Guess my ?'s are

what size pipe did you use?
is your car lowered, if so how close does the exhaust sit to the ground?

thanks
Matt

like topic says I have a set of JDM folding mirrors I want to trade for stock US mirrors

Thanks
Matt

Well wish I would of seen this post earlier.. otherwise I would of taken tomorrow off =( Had a blast last time, however I dont think my celi even starts right now... LOL got me a dead battery

my sig pic has the tein ss and 17inch with 35 series tires

What front lip is that?? kinda looks like the 404 but dont think it is... doesnt seem like there are the vents on the lower sides

sorry off topic but was curious

ps "rice" is prolly the STUPIDEST term ever....

Once agian lookin AWESOME!!! cant wait to see the finished product

Looks great guys! I've had my set now on two different celi's and I LOVE em@! just make sure to get that damn amber lens outta the turnsig! it looks even better without em. there should still be a how to on the site somewhere, its super easy

cool thats all I needed thanks guys! Think im just gonna stay with the GTfour front with the 404 lip idea

lookin great man! any chance of you taking a side shot of the whole car??