6G Celicas Forums

Welcome Guest ( Log In | Register )

38 Pages V   1 2 3 > » 

Nov 7, 2016 - 2:18 PM Forum: Interior/Audio/Electrical/Wiring · Post Preview: #1086372 · Replies: 5 · Views: 1,905
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


Most likely for an aftermarket alarm system.

Nov 5, 2016 - 4:41 PM Forum: Interior/Audio/Electrical/Wiring · Post Preview: #1086324 · Replies: 5 · Views: 1,905
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


In addition to the cleaner, I would use SEM plastic adhesion promoter before, then spray them using a plastic paint, or prime them then use any automotive paint if you want a custom colour. I used SEM adhesion promoter and SEM grey metallic bumper coater (made for plastic so no primer needed) and it held up very well for years while I had my car.

Degrease, scuff, degrease again, spray adhesion promoter, then paint.

Oct 4, 2016 - 8:25 PM Forum: Off Topic · Post Preview: #1085431 · Replies: 16 · Views: 4,378
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


I'm not able to vote anymore...when I try to log in now it says my account was either blocked or not activated kindasad.gif

Oct 3, 2016 - 8:54 AM Forum: My Project · Post Preview: #1085388 · Replies: 175 · Views: 99,510
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (jordisonjr @ Oct 3, 2016 - 7:36 AM) *
You're just jealous that the amount of white Celica 's is too damn low

True...although my old Celica is up on stands again so I think I'm better off right now tongue.gif

Oct 2, 2016 - 11:11 PM Forum: My Project · Post Preview: #1085379 · Replies: 175 · Views: 99,510
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline



Sep 18, 2016 - 9:26 AM Forum: My Project · Post Preview: #1085091 · Replies: 175 · Views: 99,510
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


What ever could it be? rolleyes.gif

Sep 14, 2016 - 9:33 AM Forum: Off Topic · Post Preview: #1084993 · Replies: 37 · Views: 9,148
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (jordisonjr @ Sep 14, 2016 - 8:15 AM) *
QUOTE (PegGTS @ Sep 14, 2016 - 9:52 AM) *
QUOTE (jordisonjr @ Sep 14, 2016 - 7:43 AM) *
Glad that site worked out. Also curious as to how long the HID kit will last haha.
How's the cutoff while driving? Just as good as an HID projector?

I don't really have anything to compare them to but the cutoff doesn't seem too bad. Took the car up to the lake last weekend and didn't seem to blind anybody tongue.gif

And I'm curious too. When I got them my friend said he bought the same kit for his civic years ago and one ballast and one bulb died within a month lmao so let's hope for the best.

Hopefully not or else Ill have to remove my front end again just to change a bulb thumbsdown.gif

Hopefully with a better ballast yours will last a little longer. I opted for their ballasts which I probably shouldn't have lol. The kit came with a relay though which in not using but I might add it in.

Sep 14, 2016 - 8:52 AM Forum: Off Topic · Post Preview: #1084989 · Replies: 37 · Views: 9,148
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (jordisonjr @ Sep 14, 2016 - 7:43 AM) *
Glad that site worked out. Also curious as to how long the HID kit will last haha.
How's the cutoff while driving? Just as good as an HID projector?

I don't really have anything to compare them to but the cutoff doesn't seem too bad. Took the car up to the lake last weekend and didn't seem to blind anybody tongue.gif

And I'm curious too. When I got them my friend said he bought the same kit for his civic years ago and one ballast and one bulb died within a month lmao so let's hope for the best.

Sep 13, 2016 - 11:23 PM Forum: Off Topic · Post Preview: #1084983 · Replies: 37 · Views: 9,148
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (kloudkicka @ Sep 13, 2016 - 10:02 PM) *
holy!!!!! subie build thread hahaha niice job paul, glad you stayed within the forum

Haha thanks Keith! Wouldn't really call it a "build" thread haha just doing little things to it to make it a less boring daily. It is only an auto 2.5i after all tongue.gif

And yeah I'd rather stay here than try and start up on another forum, especially a big one like Nasioc where nobody will even care about what I do lol.

Sep 13, 2016 - 2:17 PM Forum: Off Topic · Post Preview: #1084963 · Replies: 7994 · Views: 1,673,528
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


Ouch, right in the feels tongue.gif

Sep 13, 2016 - 1:34 PM Forum: Off Topic · Post Preview: #1084959 · Replies: 7994 · Views: 1,673,528
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (Box @ Sep 13, 2016 - 12:01 PM) *
QUOTE (PegGTS @ Sep 12, 2016 - 11:24 PM) *
Sold the Camry...no longer a Toyota owner kindasad.gif

Now you're just a Subaru owner. redface.gif

At least I'm not a Pontiac owner redface.gif

Just kidding wink.gif

Sep 12, 2016 - 11:24 PM Forum: Off Topic · Post Preview: #1084951 · Replies: 7994 · Views: 1,673,528
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


Sold the Camry...no longer a Toyota owner kindasad.gif

Sep 9, 2016 - 10:09 PM Forum: Off Topic · Post Preview: #1084873 · Replies: 37 · Views: 9,148
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (Box @ Sep 9, 2016 - 8:59 PM) *
I think if you were able to get a selector shaft half the height of the stock one it'd look better. Also good choice on not doing a boot, because I'd have to call you out on it. tongue.gif As far as the rims go you could do the ones with more spokes on the rear, wouldn't look too terribly wonky and I doubt most would notice.

My thought process on doing one set per side is that you won't see both sides at once so it's not as noticeable tongue.gif

Sep 9, 2016 - 9:27 PM Forum: Off Topic · Post Preview: #1084869 · Replies: 37 · Views: 9,148
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


Small update, just minor things.

I got bored of the ugly shift knob and surprisingly it just threads on so I got a cheap one off Amazon and threw that on. It looks so empty like that though...almost needs a shift boot lol but I wouldn't want to put one on and get called out or it. Not too sure what to do with it. I was thinking of picking up a spare shift rod and experiment with cutting it down so that the knob sits just above the trim, might look better.




Installed a sub I had sitting around since my first car before the Celi. Built a crappy box for it and threw it in just for sh!ts and gigs. Still need to carpet the box and secure it in somehow but it sounds pretty good. I also picked up a hatch cover off somebody because I didn't like the fact that people could see directly into the hatch at my sub. Put a decal on the back window for an extra 20hp.







The headlights were pretty hazy so I borrowed a 3M headlight polishing demo kit from work that comes with all the sandpapers, polishing pads and polish and a 3" air polisher and went to town.

This is essentially the kit I used:
http://3mcollision.com/products/featured-p...-kit-02516.html

Before:








After, much clearer and better light output:







Next I washed, claybarred, and detailed the car inside and out. The paint is so smooth now smile.gif







Now I'm starting to think about prepping it for winter. So I picked up a set of 5 wheels off somebody that were on a couple Outbacks. Didn't realize until I was cleaning the wheels off that they were actually 2 slightly different sets of wheels lol tongue.gif. Oh well, I'll throw 2 on one side and 2 on the other.




These ones are in pretty decent shape, but the other set in the second picture are pretty badly chipped and scuffed. They're just winter wheels though so I'm not too worried.





Decided I'd give them a coat of paint to freshen them up a little bit. Cleaned them off with thinner, and pressure washed them. Then I scuffed them all up and prepped them for primer. I wasn't too worried about cleaning up the chipping or curb rash as they're just going to get abused during the winter anyways. If the paint peels off right away I'm not too worried.




Primed them





"Zero f*cks given" laugh.gif




Scuffed the primer up and laid down 3 good coats of paint. I call this colour "random colour that was mixed wrong for a customer and that they brought back" haha. It's actually a very nice colour.









Just need to get a set of winter tires for them and they're good to go! I also ordered a set of Rally Armors to protect my paint during the winter.

Since the headlights have stock projectors in them, I figured I might as well upgrade to HIDs without fear of blinding everybody. So the other day I ordered a PnP 5000k HID kit from a site Colin (jordisonjr) recommended. They were really cheap so we'll see how long they last lol.

Before:







Passenger side in:






And both done:






Pretty happy with how they look and the colour, not too obnoxious. Let's just hope they hold up alright.

And that's pretty much it for now.

Sep 6, 2016 - 9:29 AM Forum: Interior/Audio/Electrical/Wiring · Post Preview: #1084774 · Replies: 4 · Views: 1,536
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (richee3 @ Sep 6, 2016 - 8:11 AM) *
It's the shift lock cover. 33554-20060

Well I was very wrong...ignore me smile.gif

Sep 6, 2016 - 8:08 AM Forum: Interior/Audio/Electrical/Wiring · Post Preview: #1084772 · Replies: 4 · Views: 1,536
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


Not sure on the Celi but in my Camry that's where the ECT button is. If you're doesn't have that then it's just a blank switch there. You'd have to measure it and find a blank switch that fits would be my guess.

Aug 29, 2016 - 10:03 AM Forum: My Project · Post Preview: #1084592 · Replies: 175 · Views: 99,510
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (RoadRage @ Aug 29, 2016 - 8:26 AM) *
May have gone overboard on the fresheners, haha
I'll let you know I've significantly reduced the amount

Have some small updates but nothing major, and will post some photos at a later date,
But for now enjoy this rolling shot of the last cruise I went on tongue.gif


Meh.

Aug 29, 2016 - 9:16 AM Forum: General Discussion · Post Preview: #1084588 · Replies: 10306 · Views: 1,212,173
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (placham @ Aug 29, 2016 - 3:20 AM) *
QUOTE (trdproven @ Aug 29, 2016 - 5:02 AM) *
Can't tell if u a Nissan or Toyota fan plach


Lol both I cant afford a bupra with 2j,,, so Silvias Rb powered swapped are all business highway top speed runners, 3SGTE 6GC for autocross etc ;-) daily/street work horse,
Dont know what ill do with the red one if its gonna get 3s or 5s to drive since it has no motor just got 5spd tranny. Gotta look over body see if its healthy for a 3S transplant ether 4th gen or 5th gen 3sgte obiously ;-) got bunch off Jdm kouki goodies for hatch that i wasnt able to sell ;-)

P.s. feel dumb but cant figure out how to add profile pic/aviator etc I cant figure out this site looked all over.

Go to "My Controls" then "Edit Avatar Settings"

Aug 26, 2016 - 12:09 PM Forum: Exterior Styling · Post Preview: #1084493 · Replies: 4 · Views: 1,834
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


The name of the paint doesn't matter. Toyota will call it one thing, the dealer will call it another, DuPont another, etc...

The paint code will be inside the driver's door, either in the jamb or on the door itself. There's a tag in there and the bottom left will say C/TR which stands for Color/Trim. The first code to the right of that will be the color.

Aug 26, 2016 - 10:39 AM Forum: My Project · Post Preview: #1084491 · Replies: 286 · Views: 144,129
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (jordisonjr @ Aug 26, 2016 - 8:52 AM) *
QUOTE (PegGTS @ Aug 26, 2016 - 9:49 AM) *
Gonna look sick dude! Get them on before FNL tonight tongue.gif

haha I don't have bulbs yet thumbsdown.gif So I'd essentially be driving with no headlights, or my high beams on hahaha.
And its my girlfriends birthday, so I don't think thats going to happen.

Bring her and get her some BDI laugh.gif

Aug 26, 2016 - 9:49 AM Forum: My Project · Post Preview: #1084487 · Replies: 286 · Views: 144,129
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


Gonna look sick dude! Get them on before FNL tonight tongue.gif

Aug 24, 2016 - 9:01 AM Forum: Off Topic · Post Preview: #1084448 · Replies: 37 · Views: 9,148
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


Even though this forum is pretty slow, I like it the most because it's such a small community and everybody knows everybody. A lot of other forums are just too big and it's just not the same.

Aug 23, 2016 - 10:50 AM Forum: Off Topic · Post Preview: #1084419 · Replies: 37 · Views: 9,148
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (cheela @ Aug 22, 2016 - 5:04 PM) *
black car means tinted windows are a must to "look" right. I second the tinted tails. I hate the altezza looking lights on my matrix. still gotta tint them up one of these days.

*actually, more like I gotta stop doing work on the matrix and start doing work on my celicas. haha

Yeah gotta get some tint ASAP lol tongue.gif

QUOTE (1994Celica @ Aug 22, 2016 - 6:54 PM) *
Actually get some 02-03 2.5rs seats. Thank me later. That and some strut braces should be good starting points

How are they different from the seats I have now? I'll keep a look out for some. Also any idea if there's any tail light overlays available for the wagon?

Aug 22, 2016 - 2:01 PM Forum: Off Topic · Post Preview: #1084397 · Replies: 37 · Views: 9,148
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


QUOTE (Box @ Aug 22, 2016 - 12:43 PM) *
Yay new stereo! Needs more low. *cough* Was thinking the other day depending on your laws if you lightly smoked the tail lights that'd look good, being they're an "Altezza" style a light tinting would go a long way.

If anything I'd get the overlays like these, not really a fan of tinted tails. I don't think these would fit the wagon though.


Aug 22, 2016 - 11:42 AM Forum: Off Topic · Post Preview: #1084393 · Replies: 37 · Views: 9,148
PegGTS



Enthusiast
****
Joined Apr 15, '13
From Winnipeg, MB, Canada
Currently Offline


Installed a new Pioneer deck on Saturday. Haven't been able to listen to my own music since I sold the Celi so it's nice lol.




And here she is sitting pretty


38 Pages V   1 2 3 > » 

New Posts  New Replies
No New Posts  No New Replies
Hot topic  Hot Topic (New)
No new  Hot Topic (No New)
Poll  Poll (New)
No new votes  Poll (No New)
Closed  Locked Topic
Moved  Moved Topic
 

Lo-Fi Version Time is now: August 17th, 2025 - 1:56 PM