6G Celicas Forums

Switch is in and all wired up!! Still no wiring yet!! Jajajajajaja

Bulbs are in good shape!!! If I pull for high ligths the 4 ligths turns on.... So bulbs is not the cause!! I've change the relay and same diagnosis!!

No low ligths.... I've check all fuses/ relay and all are in good shape.... Back ligth and instrumental panel ligths up normal.... Battery I think is Ok!! Anyone has this problem?? Almost one year ago I've swap ligth switch from a 96 (the one with the fog ligths switch)

Is when brining air to the car.... The air is hotter than the outside temp..... In theory it has to be same that outside temp right? I don't remember disconnecting any cakes from the climate controls!!! If I turn the ac is cold.... Is just when I want air from the outside!! I hate when this happens!!

I have a problem but I don't no how to explain it
Hot air in cab thru ac ducts..... Don't know why! Like when you press the button from ac the one that gets the air thru the car!!!

I had the same problem.... Blown head gasket!!! 8(

update..... Blown head gasket.... there was a short with the fan wiring... one of the conector had no contact at all with the relay and that was the problem with the fan!! Ive discover that my self!! All temp. sensors are in good shape! Now im gointo change the gasket water pump, timing belt and belt tensioners!! Im going to do it my self!! I think!! Tks to all for the help!!

I think that the problem is the head gasket.... It haves a few bubbles....
If I fill the radiator and the reservoir!!! Where is the water?? I mean if is full....
Another thing I don't have water/oil mix or oil/antifreeze...
With the rad cap of and if I rev the water stars moving... So my water pump is still good!!!!
The fan problem I haven't fix that... I've check the fan relay and one of the wire did not have any contact with one of the pin.... If I remove the main relay the rad fan turns of.... I try to check for short circuit and I did not find anything!!!!
So.... I don't know what to do!!!!! I HATE DRIVING MI WIFE'S CAR!!!

But it does... Ill try to buy this sensor today and see what's happen... The parts from a 90 tercel are compatible withcelica 6g?

Buy when I turn the key the rad. Fan comes in.... Is never off.... That's the weird thing.... Even cold... I haven't use the car because of this prOblem.... I hate using my wife's car!!! 8( I'll try to check this today and see what happens!!

I alredy change the radiator cap.... Now I think that the coolant sensor might be the problem!! Because it has that code! The fan relay os ok, the sensor in the rad is ok... because if i Unplugged the sensor the ac fan comes on... Where's this tempeture switch? I'm running the 5sfe!!! If you can put a picture will be better!!

Well I have the same problem.... Kind of.... The rad is in good shape... And they purge the air out!!! After a hour or 2 goes hot again!! The cooling fan is always on it never stops i already change the thermostat!!! I don't have a broken head gasket because I don't have a milky oil!!! Don't know where to star!!

Yes I did.. But my multifunctional switch connector is different..... That's we're I'm stuck.... If I cut the old one and rewire with the multifunctional will it work....

Hi there!!! I've been reading some treads about fog light wiring ... I have evrething but don't know where to start!!!
I have the 2 way switch but I think is from a 96 Celica and the connectors don't match.... Don't now how to put picture here sorry!!! If I cut my wires and put the 2way switch will that be a problem?
I have the relay and jdm fog ligths.... But can find the cables..... And I don't kno where to start!!!

Welll... The cable is in place!!! I think but after I clean the T.B the engine light turns off... The after an hour lights back again!! I think if I remove the T.B and clean everything this problem will be fix!!.... I hope!!

From where so I have to star the wiring??

I alredy done that.... The filter is brand new and i erased the code after 25 min came back on....I think that I will remove TB and clean it! 8)!

I'm pretending to do this swap.... I already have the relay (junk yard 4 free) 8D, fog ligths (eBay) and tomorrow I will get the 2 way switch (10 dlls)..... But I have a problem..... I don't see the wiring cables....

Any
threads?

I just make the diagnosis and it gives me this EGR code... 7 flashes + 1 flash and is the only problem that the car has!! Don't know where to start!!!

Well I've work for Toyota back in Mexico and evrething has specs... So if its Normal.... What's the gap spec??

Is it suppose to be like that???? The right side doesn't have this gap!!!

You do? Well is better if you paint them with out removing it!!!! The 5g Celica has the same type of trim on and me and a friend try to remove them but it has urethane and is kind of hard to remove that!! Let me know if you fix it!!

Not at the moment... But us easy ti explain.... There's a link in this site that shows you how to paint window trims? http://www.6gc.net/howto/paint_window_trim
So the gap is in the top part between the window trim and the roof.... At this time I don't have the car because she is going to get imported to Mexico... Sorry... Hopefully on Thursday I will have the car with me?? An I will take the picture!

The Window comes all the way up.... The gap is between the window trim and the roof... Don't get me wrong i didn't explain my self....