6G Celicas Forums

actually thats not all that could ever happen. i had my power and ground touch on my old fosgate amp and it shorted the wires out inside of the amp. but as long as it works now then unless you do something else to it, it should be just fine.

yea i sold it. but i still have a brand new front mount intercooler for sale. i may have someone interested but offers are still welcome.

i havent had mine hooked up for like a year. i think its an intake temp. sensor if i remember correctly.

damn kuya, are you an ill guy or what? everytime i see you post it is something with a negative comment on it. i would explain why spending money on a 7afe is worthwhile but i dont feel like it at this time. its too late. but you could always be different and pull 300hp out of the 7a

body kit molding is easier than putting a kit on in my opinion. and no, if you hit something or scrape it wont mess it up if you do it right. paint stores sell a product called SEM Seal. put that as a seal between the kit and the panel it will be molded to if you want it to never come undone at that seam. you could back two cars together and put SEM Seal between them and i bet they couldnt pull apart after it dries. then just lay a layer or two of fiberglass down. sand. body filler to get the contours of the car. sand. body filler. sand. body filler. wet sand. you get the idea. not hard at all. just a little time consuming but a kit always looks better molded in.

i sold my turbo kit but the intercooler wasnt included so i am trying to sell it now. these are not exact but they are close; 35" long, 5"high, 3"deep. i mounted it but never had it hooked up. polished endtanks. paid $300 for it. i will take offers but no insults. i can send pics if interested.

an "interfooler" would be a intercooler look alike that has no purpose. the front mount intake was not made to look like an intercooler. it is a intake that many reputable performance companies have invested in selling for the sole reason of it being a very good form of a cold air intake. also, the ones i have seen dont resemble an intercooler. but i guess if you really dont know what you are talking about or looking at it could be mistaken for an intercooler.

i dont know why everyone is saying that this is an "interfooler" or rice. these things have been out forever. i know a few people that have these and they are the best form of intake that i have seen.

i am putting it on ebay tomorrow evening. if you want it you need to let me know asap. thanks

or you could just use the buy it now feature on my special auction and get one for $1000 less

hey speedracer. lol. i think he really didnt have to modify anything to be able to get that lip. i think his gt4 hood and bumper are hiding a 3sgte that came from the factory like that.

sumitomo makes a runflat tire. thats what i got and have been very happy with them.

that is exactly what i have been thinking. something like c.net has. for n20 turbo and superchargers or whatever

at $1500 now. still up for grabs. i am now including a apexi turbo timer and silicone couplings and clamps for intercooler piping. i need to get rid of this quick.

as long as you get a decent quality tire you wont have a problem with big rims having blwon out tires. thats why i got runflats. stap them with a knife and nothing happens

turbo is now off. having to sell it. if interested check out b/s forum topic. and on the bov, i never thought of that, but i wonder what RFL does stand for. REALLY ****ING LOUD!!!

ok, tonight i found out about a major family problem that is gonna cost an insane amount of money. being this family member is close to me i am gonna try to sell my turbo kit to help out. i cranked my car up once with this setup but the only thing that was used was the turbo and turbo manifold. i didnt have the intercooler, BOV, boost gauge, manual boost controller,FMU, or injectors hooked up. the only thing that has been used on my car is the manifold and turbo once. here is a list that i am trying to sell:

- Garrett t3/t04b hybrid turbocharger
- Custom Thomas Knight turbo manifold
1 brand new 37" front mount intercooler that was mounted but not hooked up
- 1 used Conquest front mount intercooler (small hole in corner that could be easily welded up)
- Brand new TurboXS TypeH-RFL Blowoff Valve (loudest they offer)
- Brand new Manual Boost Controller
- Oil Feed kit
- Oil Return line
- 89' Turbo Probe fuel injectors (will drop right in fuel rail)
- Vortech 12:1 FMU (fuel management unit)
- Autometer ultra-lite procomp boost gauge

well, i believe that is it. i really want to put this on my car but i feel obligated to do this. this is every single thing you need to turbocharge your celica st 7afe. i paid close to $1600-$1700 for everything and i am gonna start out asking $1200. i think this is a very fair deal since this is a fully complete kit. thanks

well tonight i finally got my turbo installed. my new one came in monday and i started on it last night. only thing i have left to do is to screw the oil drain fitting on and hope for the best. i will try to get some pics up later this week. maybe ill just use charlies pics since its the same exact thing .lol. well, i hope to go get my ic piping ran on friday and i will let everyone know how she runs. thanks for the help.

this is coming from a owner that had them on my celica. those wheels are poorly made. i had those exact 18" wheels on my celica for a while. they are very easy to dent. its just like they are softer than any other wheel i have seen. i must admit they looked damn good while they were on. i think the shop gave me like $200 for them cause they were so uneven.

i think the tubes cost like $40 or something close to that.

lol. i know i am a smartass. but its the only flaw that i have so it has to be a strong one jk. nah, i had a cheap civic intake and K&N filter on the celi first. didnt really tell a difference besides sound. then i opted for the Dolocek Cold Air Intake which i unfortunately did not get to use since i decided to throw on tha ole boost. but i did hear great stuff about the DR. CAI. anywayz, you want sound and a little performance, getta "cheap" civic intake tube and filter. you want little sound and better performace get the DR. CAI. but hey, you could always just put turbo on and be done with it.

yea, you could always spend $100 more and get the same power and sound responses yes civic intakes do fit with little or no modification. yes, you can go buy the aluminum intake tube at auto zone and buy a k&n filter and have the same power and sound as the more pricey ones for half the price of them. but, hey......i dont have all the money in the world so i had to become creative too. go for it.

i am getting rid of my wheels. TenzoR Apex-5 gunmetal w/polished lip 18's. The tires a Sumitomo runflats 225/40/18. I have had the wheels for about 2 and a half months and the tires for about 1 month. Tires may have 700 miles on them. Everything is in flawless condition. Asking $1200 or better offer. reply, email hotboy_matt@hotmail.com, or AIM matts151 . pics on www.tenzoracingsports.com

i was just wanting to know what your guys' take on a veilside/erebuni kit would look like. i have a full veilside right now but everybody and their brother gets that kit so i am leaning towards getting an erebuni front lip. how do you think the erebuni front lip will flow with the veilside sides and rear? if there are any pics of a celica with this combo please post. also, if anyone wants to sell me their front lip or trade for a veilside i am welcome to all offers!

its actually not very rare since i know it comes on toyota pickup trucks years 85-present