6G Celicas Forums

yeah the grand national map sensor, it pretty good..
i bought mine from ebay.. for 30 dollar, but it work. the wire u gotta look up for Buick motor diagram..
it save a little money and can u can boost higher.. 15-30 pis.. but ur engine has to built strong.. for it..

i got question too?
i try to put timer on my too, but i donno where is (Ignition Live #1) is location where.
i thought that be in the key hole, they has four wire is connect to key,
i Don't know which one.


Red - 12 Volt + (Battery)
Black - Ground (Negative) –
Yellow - Ignition Live #1
Blue - Speed Signal
Brown - RPM

Or u can grand national map sensor too. they has the same wire diagram, and is has 3 bar on. boost from 1 PSI to 30 psi.. with out hitting fuel cuz.. cuz i know alot people who use this map sensor for their car... it only 86 dollar from auto zoner or u could go look online for more detail...u don't to wast $200 buck for 1.2 bar.. it so expensive..
and one my guy friend told about this grand national map sensor and i bought it. i use for it i didn't have to worry about fuel cut.. and i use a boost control.

Or u can grand national map sensor too. they has the same wire diagram, and is has 3 bar on. boost from 1 PSI to 30 psi.. with out hitting fuel cuz.. cuz i know alot people who use this map sensor for their car... it only 86 dollar from auto zoner or u could go look online for more detail...u don't to wast $200 buck for 1.2 bar.. it so expensive..
and one my guy friend told about this grand national map sensor and i bought it. i use for it i didn't have to worry about fuel cut.. and i use a boost control.

i talk to some other people on my group the say that if u use the engine oil on ur jdm tranny u might ruine ur switch gears, it might burn out ur gear.. or u might loose tracking.. usd tranny might be the same or some tranny might be different. cuz i did that to my 3sge tranny, i burn out my gear, so i have take to the shop and rebuilt it.. now i have a s53 lsd tranny on my swap.. make sure u ask the dealer first be fore u staring using it..

i talk to some other people on my group the say that if u use the engine oil on ur jdm tranny u might ruine ur switch gears, it might burn out ur gear.. or u might loose tracking.. usd tranny might be the same or some tranny might be different. cuz i did that to my 3sge tranny, i burn out my gear, so i have take to the shop and rebuilt it.. now i have a s53 lsd tranny on my swap.. make sure u ask the dealer first be fore u staring using it..

and i use Gl 5 tranny oil.. 80 to

i just like to ask but i was just wondering about the camshaft.
can the 3sge camshaft work on 3sgte head.. do i have to adjust to valve..
cuz i plan to use the 2nd 3sge camshaft on my 3sgte head..
i just like to ask can the 3sge get me more air flow them the 3sgte camshaft...

just need some advice before i star doing my switch...

yeah i just wanna ask about the camshaft,
are they different size or the same size
i just wondering what differen't between both camshaft..cuz i just like to switch for more airflow

I NEED A MAP SENSOR FOR MY 3SGTE SWAP, CUZ I USE A 3SGE MAP SENSOR, IT DIDN'T READ MY BOOST. IT CHOKING..AAAAWWW HELP... NEED ONE VERY BAD!!!!


[size=7][font=Impact]I NEED ONE !!!! >>>>>>>A.S.A.P<<<<<

hey do u still have that map sensor.. what years is that map sensor belong to years,
u want 75 dollar on it.. how much for shipping..

oh thank..
i see no wonder, i my car running rought.. so do u know where i can fine..one..

let me ask can a 3sge PIM work on 3sgte block and head and with ecu.. cuz i use to 3sge pim sensor, for my swap.. when i look on my boost gauge if go up past the 1-5 pis then my engine choking.. like i don has enought fuel or spark..
when i leave the engines run normal, without press gas, it run normal.. but if i press gas then the boost up to 5 pis then my engine choking..

i kinda have liltte proble about my boost, evey time i step on gas and my boost go up and then my car running rough.. i don't know what gonna can any one help help me.

hey just go buy a GT-S or Gt Coil.. it work
cuz i bought mine from 2nd 3sge coil. it work, the only thing is the wire switch..
the rmp go up till 7800..

it mean i can use the 94-99 celica gt axle too on my 3sge tranny right..

i NEED to know 2nd genration of 3sge tranny, i did a swap but i was using the all track stage 3 clutch.. when i match the tranny pine core of 3sge and 3sgte tranny, they both have differen pine core for the clutch, 3sge pine core is small then 3sgte..
but i like to know where i can find the right clutch to fit my 3sge tranny... cuz the flywheel is little small then the 3sgte tranny..

HOW CAN I FIND A CLUTCH THAT 2ND GENRATION OF 3SGTE TRANNY..
CAN YOU PLZ HELP ME PLZ..??
THANK FOR UR TIME!!

it depend on the driver only, i don't kare about sr20 at least i have a car to driver, take me from here to where i wanna go, stop wasting gas and money or money talk..hehehe i like 3sgte better, but sr20 ot the power, that ani't differen it just a cars..

hey kuv yoj hmoob thiab,
nyob zoo nej.

kuv from wisconsin, 715 area code..
there is alot asian in this website.
but it pretty hard to define..hahahaha..

look celica are nice,good looking, fast... but people just wanna go for civic cuz cheaper price...and the parts cheap...

i got a problem too, i put a metal headgasket on it, why does i still have whitesmoke comming from my exhast, and there is a black oil leaking on my header gasket, so what can be wrong!!!

Let me ask u,
did u use the gt tranny right,
which fly wheel, did u use, the GT Or the 3sgte fly wheel....

cuz i using the 3sge tranny i like to know..i am using the 3sgte fly wheel.. clutch, but can th
at work on 3sge or 5sfe tranny..

my axle hole looke the 2nd picture then..wow i am lucky then i has lsd then, that awsome.. welp i got my from 3sge gt-r modle..hehehhe

yo,
i was thinking does anyone ever put a supra twin-turbo in a celica..[font=Arial Black][color=#FF0000]

fit prefect or u just have to do some custom work on it.. does those fit 3doors

how can u tell is a lsd,
if i look in that axle hole i can see through the other side that does has a pin, that block both axle.
what if have pin in the middle of center...

the picture i am talk about the 2nd picture.
that spose to be non lsd or lsd

I can't find jdm 3gte all-track vucuum diagrams. can any one help me find one..


thank you[color=#999999]

I just wanna make use is this correct. i use 93 jdm celica engine with 93 jdm mr2 ecu, and i using the 2nd genration 3sge tranny it, but i didn't know which axle to use. i like to ask..

Which axle to use
90-93 all track- axle
90-93 gt- or gt-s axle
94-98 gt 2.2 liter axle.
90-93 MR2 turbo axle.

Which one of those axle will work on my tranny..

i did a swap with jdm alltrack 3sgte engine, but i am using the 2nd genration 3sge tranny, but i like to know does the 3sgte axle fits on this tranny or 5sfe.. the passeger side fit but i am looking for driver side axles..
i use the old axle from my old swap but the axle it didn't wanna go all the way in but it only go halfe in..
i need so know which axle i need to get 3sgte driver or 5sfe or the st164 3sge model..