6G Celicas Forums

rear suspension arm bushings / Trailing arms

ya the super charger is 3700 + tax better off with an engine swap

you can use dupli color fabric and Vinyl it comes in a spray can do some reasearch on it you need to be able to spray good and use laqurer thinner to clear all the grease from your hands ertc....youtube it you can even do your carpets it costs about 10 bucks a can

I'm currently painting my interior at a pace of a few peices a week when the weathers warm enough

make sure your spare tire is fully strapped down!

check for missing bolts on the tranny case it could also be a bad clutch or a going transmission

Ya that's whats worrying me i don't wanna drop 300 bucks to find out it doesn't fit

just wondering if the CV axles will line up etc....same input hole and all the hook ups?

Hey all i have a 1990 celica with 1990 manual transmission will the 1994 passenger side cv shaft fit and work in my car ?

how much HP you running with this build ?

Thanks for the tip now I have a new question I managed to track down all the 3sgte parts I need to make a 5sgte. Now I am wondering my motor is a 1990 5sfe and the motor the guy is selling me is a 3sgte 1991 on the stickies it only says stuff about the engines being 92+ and up will this match up or will it not?

What's a front clip 3SGTE go for anyways (Fifth gen) Also is there somewhere in Vancouver BC area I can get one?

So I am wanting to know I have two 5SFE motors one has been run bone dry of oil and is sitting in my car port (1990) and my current one is in my car (1994). Now I am wondering if the if the 5SFE (1990) is worth rebuilding and using turbo is it gonna be worth it or not I don't wanna spend three grand for a rebuild of 5SFE and not feel like it was worth it or is the 3SGTE swap just better all around ? I just don't want to spend the money and not enjoy it.

Same question I have a 5sfe 94 and i'm thinking about rebuilding the head can someone tell me what parts I will need in order to do it I want street performance only my motor has 130,000 Kilometers.

what did you set the timing at ?

thanks

I will be turboing at around 400HP and i will be puting forged racing parts into it

Hey just wanting to know if anyone has looked into rebuilding a 5SFE motor into a performance motor. Just wanting to know because I don't want to go down to the machine shop with the motor and waste my time and the machinist time so I figured that maybe someone here knows.

My third gear grinds and there is 387,000 KM on it so it's cheaper and better to get a whole transmission then it is to replace the syncros. Thanks by the way

Will a 1994 tranny fit into a 1990 celica? Please does anyone know ?