6G Celicas Forums

Hey I am in Portage Wisconsin.

Hey what are you guys running for MAF? I am looking for something better than the stock one that will work the right way, I dont think the guys running the LT1 GM MAF are getting good results yet are they?

looks sweet! nice job., hows she feel now that its installed?

I wanted to do one for a customer but he chickened out on me! Looks easy after completely disassembling a front clip.

I had a ST-185 Front clip, I cut out the chassis brackets and mocked up the engine in the bay, measured twice, all over then welded them in place, but I own a full up shop... sorry, but I have some pics if I get time I can post them, have to figure out how to have pics in here vs a link, tried HTML and V-Bullet but did not work?

Thanks guys! Yours all looks good too, its good to know there are more people out there building 6g turbo cars, we are a few and these Celicas are unique but sure stand out in a car show when there are like 150 Civic's and 300 eclipse's and one 3SGTE Celica! This is a customers, but makes me want to build one for myself! I have two RX7's and a 240SX, HMMM?
We are doing more tuning on it, more to come. Might have to add an adjustable Fuel Cut defender on it!

here is the tranny when we pulled the drivetrain out. the engine is gone, sold it to a member on here last summer.

http://im1.shutterfly.com/procserv/47b6dd0...016109CaOW7ls4E


I will get the number off it tonight, I forget what it is at the moment.

HEY COOL i used to live in Appleton, I went to Fox Valley Tech College for Automechanics! and drag raced at Kakauna Int Raceway.

What kind of car you got now?

Thought I would share, here is the big front mount we built for a customers 96 celica, we swapped in a JDM ST185 3SGTE, and a JDM MR2 Five speed (was an suto) and built him a huge FMIC at my shop (Kingsland Customs) in Portage Wisconsin.

http://im1.shutterfly.com/procserv/47b6dd0...016109CaOW7ls4E

This is a good working transmission, no problems, has around 96k on it the only reason its for sale as we did a 3SGTE Swap and MR2 Five speed trans.

Give me a real good honest offer on it. I will only be able to ship it on weekends due to heavy work load.

I have had the pics of it on here during the 3SGTE Swap last year.

kingsland@verizon.net

cell-608-617-2401

located in Portage WI, 53901

I have for sale a 1993 JDM ALL TRAC 5 speed manual tranny with 30k miles on it I took out of a front clip.
Make a good offer.

I also have a MR2 3SGTE Engine with Turbo, intercooler, ECU, Ignition, wire harness, accessories etc..
I had this engine sold for $1,500 and the guy came to my shop and checked it out, but he still does not have the money saved up and I need to make room in my shop!

call 1-608-742-0930

located at

Kingsland Customs
512 Brook street
Portage, WI 53901

http://im1.shutterfly.com/procserv/47b5d61...016109CaOW7ls4E

http://im1.shutterfly.com/procserv/47b5d61...016109CaOW7ls4E

This is my core from a 3SGTE & MR2 5-Speed trans swap, this is a good running 7AFE engine with all accessories, and auto trans from a 1996 Celica ST. It has a little over 100k miles on it. I will warranty it to run, I own a part time shop building show cars, it sKingsland Customs in Portage Wisconsin, and can be picked up there or I can ship it out at your cost.

Asking $500.00 for the whole thing + shipping.

Also I am going to be putting up an MR2 3SGTE with all the MR2 accessories, ECU and wire harness that has a few cut wire bundles on it, but the majority of it is there, shift cables, I have a low milage ST185 five speed trans too.

madmike at toll free 1-888-742-0930 kingslandcustoms@verizon.net we work nights, 5 to midnight at the shop!

yes put wheels and tires on it to move it around if you dont have a fork lift, much easier and you wont break parts. You need about five friends to help move it around. get zip lock bags and lable all the hardware you remove with a sharpie and dont cut any hoses or lines, remove them. We are doing 96 Celica at my shop right now, we got a MR2 3SGTE engine and trans, and a st185 front clip, using the accessories, brackets, 1/2 shafts, mounts, trans cables, pedals and wire harness from the ST185, and the 3SGTE and trans from the MR2. So we even have the spare engine and ALL TRACK trans when we get done, what to do with that eh?

good luck and let me know if you have some questions.

madmike of Kingsland Customs, Portage WI