6G Celicas Forums

Still for sale, will soon become a part out.

Bump. Updated sold items, added some items.

Bump! Fair offers welcomed!

Looking to sell everything together at this time.

No, I adjust the camber with a camber adjustable camber bolt in the top strut bolt. I don't really think there is that much room to do it with a top plate. I will include the camber bolts with purchase.

Would anyone be interested in purchasing this entire combo?

GT4 4 Pot front brake calipers in black with shaved "Celica" emblem, along with complete front superstrut suspension (spindle, banana arms, LCAs, etc) attached to BC Racing BR series coilovers for GT4. And to clear the brakes, 17x9 +30 Rota Grid in hyper black with 255/40-17 Sumitomo tires? Here is more details:

- GT4 4 Pot front Calipers, pads and rotors (pads have 80% left on them), Calipers are high temp painted black with the celica logo shaved. Going rate on these is about $500
- Superstrut spindles, banana arms, LCAs, swaybar endlinks, etc w/ approx 50k miles on it. Going rate on these is about $400
- BC Racing coilovers, shock housings already welded to spindle, about 1k miles on them. Going rate on these is $1000, and about $200 labor to cut, and weld housings professionally.
- Rota Grids 17x9 +30 in Hyper Black, about 1k miles on them. Going rate on these is about $750
- Sumitomo HR Tires 255/40-17, about 1k miles on them. Going rate on these is about $500

Entire setup to swap the car over to superstrut coilovers and 4 pot brakes. $2000 + shipping. I am assuming shipping would be around $250 for all this stuff. PM me if interested.

No risers. I can sell the whole spoiler off the car, just re-painted black... $300 shipped.

http://www.6gc.net/forums/index.php?showtopic=95407

I do have an extra set of transmission brackets, I will PM you.

- Caldina longblock (25k miles), with powder coated center entry intake manifold, powdercoated valve cover, ignition coils $900 + frieght
- ct15b setup (25k miles), includes brackets, lines, gaskets, hardware, etc $300 shipped w/factory dp/cat $350 shipped
- 99 Camry FWD E153 transmission (76k miles) with MR2 turbo LSD includes left stub shaft, right intermediate shaft, and new axles $800 + frieght
- ST205 AWD transmission and center differential (50k miles) $450 + frieght
- ST205 shift linkage with solid bushings and shifter box with gear shifter $160 shipped
- ST205 main drive shaft (from front diff to rear diff) $200 shipped
- Berk 3" downpipe with flex section, coating, and O2 bung (new) $OLD
- ST205 GT4 ECU $200 shipped
- ST205 GT4 Engine Harness with ECU plugs $200 shipped
- ST205 MAP Sensor $OLD (I think I may have one more of these $160 shipped)
- ST205 Superstrut steering rack L&R outer tie rods $40 shipped
- ST205 front swaybar with endlinks, mounts, and bushings $OLD
- ST205 GT4 Full set of 4 mounts (2 new) $200 shipped
- ST205 GT4 Full set of electronics coil, igniter, resistors, relays etc $125 shipped
- ST205 alternator $90 shipped
- ST205 AC Compressor $90 shipped
- ST205 starter $60 shipped
- ST205 power steering pump, brackets, lines, reservoir, hoses and belt $120 shipped
- ST205 alternator mount assembly with engine hook $40 shipped
- ST205 vented exhaust manifold heat shield $90 shipped
- ST205 fuel lines and fuel filter assembly $70 shipped
- ST205 transmission electronic speed sensor $60 shipped
- ST246 Caldina top mount intercooler, with brackets, etc $100 shipped
- 31" x 3" front mount intercooler with 2.5" inlet/outlets (new) $80 shipped
- ST185 3" stainless ebay exhaust (new) $250 shipped
- Aluminum 2 Row Racing radiator $110 shipped
- Samco silicon radiator hose kit for ST205 (2 hoses) in black new $100 shipped

I am sure there is more I am forgetting. Ask and I may have. I have a lot of extra brackets, coolant necks, mounts, sensors, accessories, etc.

All "shipped" pricing to lower 48 states. Please PM with email address for photos of any particular item.

96 Celica ST 25th Anniv
225k miles 5spd
Sunroof, Power Everything, Everything works
Clean Florida Title

GT4 Front brakes
GT Rear brakes
BC Coilovers with superstrut front suspension
17x9 +30 Rota Grids w/ 255/40-17 Sumitomos
Front and rear splitters
Euro fog lights
JDM clear corner lights
JDM tail lights
GT4 rear wing
GT4 front and rear strut tower bars
Sony Bluetooth radio
Cup Holder/Tray DIN panel
TRD Leather shift knob
Short shifter

It will need the rack replaced soon, as the rack leaks and the inner tie rods are worn. This car can be driven anywhere.

$3600 Cash (not interested in trading)

I am an enthusiest, but I just have too many cars, this one has to go. Please only contact me if you are serious, meaning you have cash in hand. Thanks!

Here is the link to the craigslist ad for it with a lot more pictures:

Click for the Craigslist Ad

SOLD

Update, definitely for sale now.

PM me if you want them. I have pics.

I am not sure if you read the post thoroughly. Most of my driving is highway commuting.

$650 shipped.

Here is a link to the info from the manufacturer's website: http://www.meganracing.com/product_detail....18&catid=31

I am contemplating going to the superstrut suspension, I have Megan Racing Coilovers on the car right now. They have about 10k miles on them. They do not leak or have any issues, I did however make one modification. The rear camber was pretty bad once it was lowered, so I oblonged the upper hole on each rear strut where it attaches to the spindle by 1.5mm to allow for more camber adjustment. Would anyone be willing to pay $600 + shipping for them? I would estimate $50 shipping in the CON US. Once I have a buyer, I will remove them and proceed with the superstrut chage over. If I can't find a buyer, I guess I will stick with them. I can provide pictures if needed. Tools are included of course.

UPDATE>>

I have decided to switch to the superstrut suspension. I will have these removed from the car within the next week and have ready to ship. $550 shipped in the CON US is what I am looking for.

I vend BC, you can PM for a price if you want.

I have this tall arm rest that came with the car I just bought. It is in excellent shape. It just slips on to the short arm rest. I have no idea what it's worth, but I thought $30 shipped to the CON US was fair. Just PM me if you would like to purchase.

Thanks!

Okay, I think it's the HKS Legal exhaust, part #3301-ST063.

Looks like an HKS (051). Must be an old model, because it doesnt look familiar. Maybe the "sport" model from the 90s.

The JASMA stamp means that it meets certain Japanese regulations. I did find some info I didn't know, the stamp has a number which will tell me the manufacturer. I'll take a closer look tomorrow. But here is a list I found and the site is http://www.jasma.org

Akiyure Inc. 047
Apekusera Inc. 048
Iida Inc. 130
Ikeda industry 003
A tea sea international Japan Inc. 074
Etching k s Inc. 051
Ebansupuranningu asuretsuku division 129
M-TEC Inc. 002
Otoekuze Inc. 120
Automatic backs seven Inc. 097
Ovuareshingupurodakutsu Inc. 124
Katsu Inc. 088
Car land 119
Kind technostructure Inc. 115
Kakimotoreshingu Inc. 017
Garcon division 114
Can tile office 113
5ZIGEN international Inc. 005
Sun automobile industry Inc. 076
Gee earl Inc. 012
Jieiruto Inc. 013
Gee piece Potts Inc. 125
Jiyaosu Inc. 067
Starting line Inc. 069
Spoon Inc. 044
Possession the Suruga Seiki Inc. 106
Zero sports Inc. 100
Tanabe Inc. 026
Taniguchi Inc. 035
Takeoff Inc. 004
Top line Inc. 110
Trust Inc. 006
Knight sport Inc. 019
Huaburesu Inc. 111
Fujita engineering Inc. 061
Rattan ***353;â engineering and research industry Inc. 001
Free way Inc. 123
Buritsutsu Inc. 021
Hoshinoinparu Inc. 037
HONDA twin cam Inc. 011
Mainzuueibu Inc. 038
Makishimuwakusu Inc. 045
Pine Shaw Inc. 008
Meiwa Inc. 041
Yajima industry Inc. 091
Yamato Inc. 122
Lucky automatic Inc. 126
Love lark Inc. 083

An updated list: http://www.jasma.org/association_muffler/membership.html

SurTrack TO-8030

The description on Rockauto said 20 3/16" compressed length, as opposed to 20" with the ST185 part. I am not sure if that is just longer threads or what, but here are some pictures. They look pretty beefy and come with a seal, grease, nut, and keeper. Maybe someone an compare?

I needed a full exhaust for my swap, I saw this for a good price and bought it. I am not sure who makes it, anyone guess? I have seen HKS and Apexi units that look similar in the tip and muffler design. I have looked all over and cannot determine who manufactured this. Any of you GT4 gurus know?

Gotta love Rockauto, two brand new axles heading my way for $110 shipped.

Excellent! This is what I was looking for. Now my last question about it, are the es250 or Camry V6 axles a better fit then the ST185 axles (passenger ST185 axle 1/2" too short)? If not, I am guessing the spacer made from an MR2 stub shaft would be needed.

I am new here. I did quite a bit of searching, but can not find a definitive answer to this, so I thought I would ask.

I am using a Caldina 3SGTE, a E153 from a 99 V6 camry, MR2 LSD, MR2 inner driverside stub, and MR2 inner passenger intermediate shaft. I am using ST205 hubs and spindles, what axles do I use? I am guessing from a Camry? Just not sure what year or whatnot. If anyone can point me in the right direction, thanks!