6G Celicas Forums

What tool do you use to get at those 2 bolts? Do you remove the oil filter first? There's no space to get a wrench in there... at least, from what I've tried.

I have to do mine too. Did you get the 180F or the high temp 192F one? Partsource has the 192 while napa had the 180.

And did you guys use gasket sealer (that ultra black) stuff around the gasket area? Or just scraped the area with a screwdriver and called it a day?

New? or how many miles on it.

like above, front/rear, w/ ABS or w/o?

lol.. nice way to go off topic.
I did play. Way too much, in fact. haha.



Hey Azian, you getting the trd shifter for this summer?

So which quickshifter is the one we want?

I just followed the instructions for the right circle; used an exacto blade and slowly wiggled it out. No damage.

Can anyone else verify that?.. I'm stick of hitting the cigarette charger for my gps when I drive. haha.

Ya, it's from the tacoma. Do a search.. I'm at work so I can't look them up right now.

How much of a diff would you feel on a 5sfe from a stock flywheel to the lighter one?

Which part is the blower motor?

Hey Gerald,
How much is that horn from toyota here (in Cdn)?

Digging up an old thread here.. but I'm doing my rear rotor and pads soon.


-if you are removing the rotors, be extra careful with the rears. i was not fully aware of how the e-brake system worked getting into this and was in for a bit of a surprise pulling them. ended up having to buy a rear brake parts kit to replace a little plate that held a spring down..

Anyone want to elaborate about this little plate for the e-brake?..

Post the exact model. I think Asian Advanced can help you (if he's got time).

She backed up?.. lol.. was she trying to parallel park?

How do these ones compare to the stock ones?

I experienced something similar. Try disconnecting your power antenna module (accessed from inside the left side of your trunk). That solved my problem.

I'm interested, but are there pics of the black/chrome/pearl? I have a hard time visualizing pearl. Will chrome be about the same as the oem ones?

Any pics of the Trust shift knob? What happened to the leather TRD one?

lol... so it was you!... I knew I shoulda put $120.01. lol...

So... did you install them in your car?

Ships only to the US.. bah..

I was going to bid on that auction, but I screwed up the time..
Very good price on it.. I think I was gonna bid up to $130-140.

Gerald.. you hit the nail on the head... I HATE it when that happens... >.<

I'm wondering if there's a solution to this.
For the driver's seat, there's 3 adjustments;
the angle of the back (from the lever on the side of the seat),
how far up the seat is (from the lever under the front of the seat), and
the angle/height of the bottom of the seat (from the wheel on the side of the seat).

Now, for the passenger, they don't have that bottom of the seat adjustment and
there's this huge gap between the backrest and the bottom.
Is there any way to close that or adjust it?

I don't know if anyone can help, but I have the Canadian GTS version, which has the sport suspension.

So after reading all of this and reading other threads, something like this one will fit my celica?

http://cgi.ebay.ca/New-KYB-GR-2-Gas-Shocks...1QQcmdZViewItem

334378 Front Right & 334379 Front Left
vs
365092 / Front Right & Left X 2 (insert replacements)