6G Celicas Forums

I was thinking about boaring my 5sfe out 20 or 30 over, sleeves, and 100 shot of nitrous, thoughts would be helpful

its got the distributor

do you have low beams too

http://viewmorepics.myspace.com/index.cfm?...mageID=30045307

Donor vehicle: JDM 94-99 Toyota MR-2
Mileage: 20k-35k miles
Displacement: 1998cc
Valve Train: DOHC 4 cylinder, 16 valve, 2.0L TURBO
Horsepower: 245HP @ 6000 RPM
Torque: 200 LBS-FT @ 3000 RPM
Compression: 8.8:1

Included parts
100% complete engine
-complete motor
-block
-head
-intake manifold
-exhaust manifold
-sensors
-fuel rail
-injectors
-cam angle sensor
-throttle body
-alternator
-starter
-ignition wires
-pulleys
-turbo manifold
-turbocharger
-5spd LSD transmission

thats the best description i can give you pics up tomorrow

this engine has roughly 20,000 miles and i want to say its a 95 or 96 but i cant read japanese

$100

as it looks on my 5s and the 3s all the parts are in the same place and sit at the right height, and i know the only difference that i can notice is that the oil filter is on the bottom of the block instead of just under the exhaust manifold

no not yet its at my parents house and i moved out so i will get some pics asap, ive also heard that its the same just the wir harness isnt long enough but dr. tweak can fix that (phoenixtuning.com)

when i bought the engine it said 94-99 mr2 3sgte

if you have an st there are a bunch of parts you will need ill be honest about that the gt is the easiest way to swap

you can run the stock 5s tranny and then nothing more is needed, im guessing that its about a 95

i have a jdm 3sgte for sale check it out in the for sale forum

3 bar map sensor $100 obo

how much and what condition

st205

rapid city, SD 57702

everything is bolt up to our engine bays, and it also comes with the ecu of course

i had bought this JDM 3sgte and the LSD 5 speed tranny same engine as the st205 and now that i am moving i need the money for the move, however the wire harness is cut and of course its a direct bolt up.

the engine does have all the sensors along with the AC pump and all the goodies.

MR2 3sgte with LSD 5 speed tranny- $2300 O.B.O.
with exhaust manifold and downpipe- $2500 O.B.O.
prices are without shipping!

thanks on the dr. tweak part ive been looking for him for awhile and since i am moving to las vegas here soon so ill be closer than what i am now

i had bought a 3s from an mr2 and i need a wire harness because they had sent me a cut harness does anyone know where to buy a harness for that motor its a jdm motor, and however i need that 3rd ecu plug as well

and another plus is i have all the sensors, ever wire that is on the harness has the sensor attached, the bad part is that they cut the harness at the firewall......

well this motor i beleive is a 3rd gen, jdm, 5spd, with lsd. I paid 2100 for the motor and all that, and they sent me a motor thats worth 2500 so their mess up and im trying to get a un cut harness out of them

i ordered my 3sgte about a month ago from got-jdm.com and they sent me a MR2 3sgte instead of the st205 celica engine, but im not too worried about the deal the main thing i am worried about is the wire harness they sent me a cut harness so i would need to get a un cut harness does anyone know where i would be able to find one, its a jdm motor if that matters

ok thanks because i have the 5s motor and my radiator is cracked, but i have the 3s on order so i was wondering, thank you

will the 5sfe radiator work with the 3sgte