6G Celicas Forums

So I ended up using a small punch to punch it through with the gear still in place and ran into a snag .. ended up busting the sides of the holes stopping the pin from being able to be punched through and just jamming it in there even more . sooo... I ended up having to use a drill press with a 5/64 sized bit in order to drill the broken pin out . fast forward; I made a new pin out of a 3/32 sized black oxcide bit(thinking of just going cobalt) but the hole seems slightly larger than the new pin. Is it supposed to be a snug fit? ? or it too large now? Does anyone reccomend any sort of adhesive to stop the pin from sliding around and falling out once the motor is reassembled? Thanks in advance