6G Celicas Forums

I should have stated that, it's stock.

so my 7afe is blown and it's time to move on to bigger and better things. I'll be putting up a part out thread in a few days once I get the majority of things taken off. My question is how much can potentially be made off a part out? or rather what have some totals been your those of you who have done a part out.

thanks

My welds haven't cracked and i've driven it hard a few times, but the 3 bolts at the header>downpipe all broke off

So the 3 bolts at the header>downpipe snapped probably from being rusty so i'm running an open header now Will a shop have bolts on hand to fix this? It's annoying to drive like this

everything looks great. good job

That looks sick all bolted on. You guys should come up with a similar design to fit the 7a as well

Both mine are torn and have been for probably around 10 months now. It's on my list of things to fix...lol

All done, damn this thing is LOUD.

Using a dremmel to bore the holes slightly larger, it's working so far, almost on. I need to be able to drive my car home tonight(5 mins) and then to the shop tomorrow(10 mins) is that gonna be ok without the second o2 sensor in?

Anybody have problems lining up the header? All the holes line up but when I try t put it on they don't slide all the way, could it be off slightly? The header is from surewin, houldn't it line up perfect? I was hoping the only prolems would be the second o2 and the patch pipe, not this

Wraped and ready to go but I can't drill a hole for that second 2 sensor so I'm gonna have to bring it to a shop I guess.

Just got the ebay header from surewinproducts. A friend of mine got it for my birthday but it won't be installed until probably Wednesday, does the surewinproducts header fit perfectly or will I need that small section of piping to connect the exhaust?

These are the wheels I want to eventually get for my car in pref. 17's as well, maybe even 16,

How long until it's fully repainted and put together? looks promising

How are the Megan springs in terms of drop/price/ride quality?

Amazon sells them for about $100 and Megan claims a 2" drop in the front and 1.75" in the back

how much would the gasket be for that header?

I'll continue to put 16" wheels on mine.

I like the 3 spokes, although i'd much rather have some OZ Superturismo GT's

Now I just need to get some money.

Jason, where are you? lol

I want to see this buck20 pull too

yes get a new(to you) car, no get a 6th gen

I've got some of daftboy's car saved that I can post, but since I see daft viewing this thread, i'll wait so I don't duplicate.

Turns out I didn't have them, so here it is straight from his profile

I want to repaint mine in Hondas Blackberry Pearl

Which 4a has the best aftermarket support?