6G Celicas Forums

bump it up

Yes! and fixed! thanks i just wasnt thinking.

(Also my daily bump)

I am willing to try shipping overseas. Ill try to get an estimate for you tomorrow.

it goes directly above the radio and is molded to appear as though it is part of the stock dash

I have had these parts laying around for quite some time now. I think its finally time to sell this stuff and clear up some room in my garage. I can always take more pictures upon request so feel free to ask.


mr2 2 bar map sensor part number 89420-17030. $50 shipped


Greddy E-Manage Ultimate with appropriate wiring harness and air temperature input as well as the greddy 3BAR map sensor and an additional input for things like a wideband O2 sensor. $300 shipped


460cc supra injectors (perfect for the 5sfte). These were newly cleaned when i bought them. Part number 95500-2010. All 4 for $60 shipped


Doggy Single gauge pod with AEM wideband guage along with appropriate sensor wires ( no sensor as it is stuck in the downpipe). $70 shipped for the pod. $70 shipped for the gauge. $120 shipped together. On a side note ill try to work on the sensor to see if i can get it off the downpipe.

3 gauge pod and gauges SOLD

Blitz BOV $60 SOLD

Other items; Tuner toys oil adapter, appropriate ct26 steel braid oil feed line, stock c26 oil feed line with adapter welded onto the end, working ct26 turbo.

More to come in the following days. I will try to check my messages as frequently as possible.

still working on getting all those parts off though. it will happen eventually

the stock 3sgte lines work if you are using the ct26 turbo. If you use these lines you will need to weld a fitting onto the end of the oil line, i forget the size. The 3sgte oil pan is identical to the 5sfe oil pan with the exception of the oil return line, so you can use the 3sgte pan or tap a hole in the 5sfe pan.

I will be selling the oil lines from my 5sfte celica soon if you are interested, the fittings have been welded already and i have the fitting needed to attach to the oil pressure sensor.

double post...

i can check out shipping prices and let you know.

also for sale
Blitz Blow off valve 80 shipped

2 post spoiler $75 shipped


Chris C Riser Blocks, These are about 1/2 the size of GT4 riser blocks. SOLD

picture of the damage

So my celica bit the dust and I plan to part out what I can to help pay for my new car. The celica shell and stock parts will be donated and are not for sale unless otherwise posted. Items will be added with pictures as they are removed from the car. I have all the parts needed for a 5sfte and many jdm items, my profile shows a complete list of what I have. If my prices seem unfair send me a PM, its been a long time since I have bought some of these things and i cant always remember what they should sell for.

stock front strut bar,Rear GT4 strut bar, Best Offers

2 BAR MAP sensor, good for 5sfte $80 shipped


TRD doggy replica Front splitters. These are in good shape with only minor scratching that will need to be painted over to match your car anyway. There are holes where rivets were used to attach the splitters to my bumper. $110 shipped obo

Also for sale are 4 460cc RX7 injectors suitable for a 5sfte project. The injectors are in working condition and were newly rebuilt before i bought them. $80 shipped

More to come in the next few weeks. Feel free to ask any questions.

I have a pair for sale. the indicators are stock with the amber though. I believe the amber can be removed, but i never saw much a point to do it.

ill have a shell with awesome paint and trd extras soon. but im down in Tx

sure ill get some up tonight

also bumping

Selling my apexi neo as i have upgraded to the emanage ultimate. the front of the neo is near perfect with only a small scratch on the lower left side of the screen. the rest of the neo is scuffed in spots and has traces of leftover glue from where i installed it.

The neo includes the box it came in
instruction manual
wiring diagram manual (5sfe is not included in here, but its super easy anyway)
and a small bag of crimps and wire insulators for the install.

asking $200 shipped obo.

thanks pressure, i took your advise and the car started right up . i wonder why the ign side of the emanage wont work with our cars. its strange since the wiring diagram is so straightforward. ill look into it another time and post results here if i figure it out.

I installed my emanage ultimate the other day and have been having trouble getting the car to start up. The engine turns over and the wideband is reading about 15 when i crank it but it will not start. my wiring info and emanage settings are listed below. does anyone know what the issue might be?

Power/ground/airflow/rpm
16B(gray) spliced into 11B (VTA Throttle position sensor)
15B(white) to 2B (Airflow input)
22B(Green) to 2B(Airflow output)
23B(Brown) spliced into 3A(RPM, IGF)
24B(Black) spliced into 14A(Ground)
25B(Red) spliced into 12C(power)

individual injection Add/Trim
17B(Blue/Red) to 12A(inj 1 in)
18B(Orange/Red) to 11A(inj 2 in)
19B(yellow/red) to 25A(inj 3 in)
20B(purple/red) to 24A(inj 4 in)
30B(black/red) spliced into 13A(ground)
34C(blue/gray) to 12A(inj 1 out)
35C(orange/gray) to 11A (inj 2 out)
36C(yellow/ gray) to 25A( inj 3 out)
42C(purple/gray) to 24A (inj 4 out)

Ignition distributer type
5A(blue/white) to 20A(IGT in)
12A(blue/black to 20A(IGT out)

speed signal
31C to C9( speed signal output)
37C to C9(Speed signal input)

Knock, intake temp
32C(blue/yellow) spliced into 5B(Knock)
38C(purple/yellow) spliced into 3B(intake temp)

Crank angle
33C(gray/white) spliced into 4A(crank position sensor)

Jumper settings
JP1-OPEN
JP2-OPEN
JP3-OPEN
JP4-OPEN
JP7- 1-2
JP8- 2-3
JP9- OPEN
JP11 1-2
JP12- 1-2
JP13- OPEN
JP14- 1-2
JP15 1-2
JP18- OPEN

and the emanage parameter settings are set to
engine code-universal
#of cyclinders-4
engine size-2200
airflow meter- pressure
airflow meter spec- TY_PR-2
RPM signal type- ignition signal
crank angle type-TY_1

i did some looking around and came up with this http://ww2.justanswer.com/uploads/maxemily...12959_5s-fe.pdf Just for future reference.

ill be installing my greddy e manage ultimate soon. so if anyone has the 96 5sfe ecu pinout or knows where i could find one please help out.

annnnd then we elected him....twice lol

ok so he said "Don't come in here saying there are worse states and then say you aren't going there" i never said there were worse states, i said "
i think there are worse states" (THINK, implying this is my opinion). I then refused to enter a conversation about which states are worse to avoid offending people from other states. why? because i didnt want to. but here are some random facts http://blog.bestandworststates.com/ i have no idea how credible these are. i dont see texas at the bottom of any list...

last time i check i was entitled to my own opinion. chill out there tough guy. i think ill do what i want how i want to thank you.

not going there. draw your own conclusion

i think there are worse states...

i agree

but here are mine http://www.6gc.net/members/6117