6G Celicas Forums

Hello guys.
I have a weird problem with my Celi.
When i flash the right turnsignal doesn't the rear blink but the front and side blinks twice as fast as they usaully does.
When i flast the emergencylights blinks the front and side normaly but the rear don´t blink att all.
I have tried to change the bulb but i didn´t work, i have also looked behind the emergencybutton and it looked ok.
So what do you guys think of my problem ?
I think one of my wires is off, i don´t think it could be a relay or what do you think ?
Also, can someone post a pic och the relay for the turnsignals ?
//Fredrik
Sorry for bad English(Sweden) : )

okey, is that a speciel one for just our celi or is it a universal tool ?

Which size is the puller?
100mm, 150mm or 200 mm ?
Need to know asap because Im removing my steering wheel right now : )

Can someone post a site there i can order bracets ?

Hello.
I wonder if someone can post a guide or something like that for replacing the steering wheel.
How did you guys do when you replaced yours ?
Do I have to worry about the airbag ?
Regards// Fredrik

Does it show the oil or water temperature ?
Need do know asap : )
Regards // Fredrik

Okey here are some pics.
The whole interior
The new chairs
Guages
My new chairs
And that's about it.
I'm looking for new floormats and a new steering wheel.
Can someone maybe describe how to change the steering wheel ?
Have a nice day.

Okey. Thanks for all the help.
I hope it will stil work even if i have me needles of.
Your gauges looked really good : )
Did you just paint the needles with a spray can ?
// Fredrik

Thank you, my newest problem is how i remove the pin that stoops the speedo att zero ?
Can you write a more detail story also ?
I would be so happy then : )
Thank you so much // Fredrik

The needle just pooped up now so i guees i am sreewed.
I have to try to fix it like someone said but does anyone knows how you remove the little pin that stoops the speedometer and the RPM meter ?
Sorry for bad english

Who can i put my new guages on place if i can't remove the other ones ?
I have seen a lot of 6Gen celicas with white guages.
I bougt them from www.birba.com
Please tell me how to do : )

I removed my whole cluster today but i don't know hot to remove the needles ?
I don't won't to brake anything.
Have someone here tried to remove the needles ?
Need quick help !

When i removed my guages last week won't it light up and i dont know why ?
Does anyone have/had the same probs that i have ?
I have meusured the Voltage and checked the circuit breakers but it still don't work : /
I have also checked the diods and they are okey.
Can someone help me ?

How can i remove it without damaging anything ?
//Fredrik

How do i remove the power window button controls panel ? Does i have to remove the hole door panel ?
And how do i remove the lite round panel around the ignition/starter ?
And where do i find white gauges with km/h marks ?

Thanks for helping me, this is a real good site

Okey thanks, i took of the center panel earlier today and that one was easy, and the right air condition vent is easy to, the panel behind the door lock is also easy because there are just a screw but the ones i have problem with is the windshield controller, left vent and the panel around the gauges and steering whell. I took of the screws but it didn't wont to pop out

Sorry for my bad english.

Hello, i'm a kind of new hear so.
I was looking through the forum and didn't find and Guide how to remove the Interior panels.
Can someone please make a guide och describe to me how to do it ?
And i also wonder how you painted yours interior ?
Plasic primer, Paint and clearcoat ?
Did you leave the joob away pr did you do it yourself ?

One last question.
Do i have to remove the hole door panel when i want to paint the panel that contains buttons for sidemirrors and windshield functions ?

Hello, i'm a kind of new hear so.
I was looking through the forum and didn't find and Guide how to remove the Interior panels.
Can someone please make a guide och describe to me how to do it ?
And i also wonder how you painted yours interior ?
Plasic primer, Paint and clearcoat ?
Did you leave the joob away pr did you do it yourself ?