6G Celicas Forums

yes, they are sold and on the way to their new owner

yes, the st205 is bigger. But it does not bolt to the second gen intake manifold. The guy that bought it is having his st185 tb bored and is putting in the st205 throttle plate

nearly everything.
I have had a lot of offers on the map sensor, ecu, injectors, etc. but truthfully i would rather sell all of that as a complete package for someone to convert their 2nd gen 3sgte to st205 management. Things that are sold are:
shifter cables
throttle body
intercooler pump

not sure but it is 94-99 st205. It even has the connectors for the st205 fog lights and side markers

only reasonable offers please

so i am guessing not many people actually have 3sgte swaps here?

bump me up

$50 plus shipping sound fair?

prices:
-COMPLETE UNCUT engine harness and front body harness 300
-tmic Core 350
-intercooler pump sold
-map sensor sold
-knock sensor sold
-Ignitor sold
-coil sold
-ECU 200
-intake manifold 100
-throttle body sold
-fuel rail 30
-540cc injectors 100
-engine and trans mount 50 ea
-transmission cooler 40
-electronic speedo sender 40

Engine and body harness UNCUT!!! no connectors missing


st205 shift cables and shifter


Ignition coil/ignitor


Right engine mount and top/left transmission mount


Intercooler pump and rubber lines


fuel rail w/ 540cc injectors


intercooler
As you can see it got a bit scratched up in shipping. But keep in mind, the one it is sitting next to is in perfect condition



ecu and map sensor
[/quote]

BUMP for updates. Check original post

much appreciated

He only expects to get back what he has put into the car plus paint if thats what it takes to sell it. Mechanically, its in as good as or better condition than any. Its definitely in better condition then when he bought it.

He cant trade for that little of an amount of money because he needs over 6k just to get the title from the bank. And 4k to pay off the high interest personal loan tanken out cover the rest
And he is looking for something in the 1-2000 range that will keep chugging till he is out of school. If you think your car could sell for 7k, do it, then buy his car. He shouldnt have to worry about selling two cars

You sir, have absolutely no idea what you are talking about, or what this car is.. It is All wheel drive. And believe me, it costs way more to swap in an st205 driveline than 4500 not even including labor. I know this first hand, and I would like to point out, that my car was already an all wheel drive platform. Its called supply and demand. There is much demand for the car, and the supply is a total of two. I beg of you, please stay out of this thread and clutter it no further. This is not a debate, its a for sale thread

Nate,
I know your car is in very good condition, but the honest truth is that Kevin needs the money, or else there would be no reason to sell it. He really loves this car. But it has dug him into a hole that he cant climb out of with His GT-FOUR. He needs around 10k to take care of the debt it has caused. Since he has got the car we have had to
1)replace the clutch($432) and flywheel($330)
2)we are currently in the process of relacing the engine. The old one had bad compression on cyl 2(cost of new engine is $2300 shipped, but you can discount about $900 in parts that he will be selling to me and others)
I will be around when you are ready to do your swap. Or if you could somehow get Kev's car, I would always be around to help. But he needs the money. Sorry man, He cant trade..

yea, but who will be selling one of those!! lol

Honestly, the car is in the exact same condition visually as when it was first bought from Kostas(in the thread linked by walker) minus the fact that the paint on the front bumper is mostly flaked off. But I will be getting updated pictures as soon as Kevin can get the car up to me. Which would be this weekend at the earliest.

Keep in mind that Kevin would likely accept an offer of about 12k without paint.

I will let you know if the mounts come on it once it gets here

Celicast, we did not get that halfcut here in Denver. Last i checked, he is keeping that in storage until he moves back to the states. We are getting a motor only from Canada

Its not up for trade. He needs to dig himself out of the debt this car cornered him into in the first place

Wow, I cant believe this car is still for sale. I saw this thread a long time ago when i was selling leftover parts from my clip. I guess noone here is really interested in having an awd celica
There are many things you are not considering...
1) its one of two, which funny enough are both up for sale
2) He is asking 14k with BRAND new paint, and 14k does not mean thats the only offer he will consider
3)His is modified, 265 horsepower at all 4 wheels to be exact
4)Celiman05 is not asking enough for his. Considering that only two are in the country, he needs to reconsider his price. But im sure Kevin would most likely take $13.5 cash if it was waved in his face..

Also, if you could remove the pictures of celiman05's car so people dont think it is Kevins and just leave the link to his FS thread, that would be great

yes it is. but as lot has bben replaced and it is getting a very expensive paint job the new owner will be getting:
a new jdm engine w/ about 40,000km's on it
spec stage 2+ clutch w/ fidanza flywheel(the act grenaded )
New paint
possibly apexi gauges, but Kevin has not decided if he is selling them with the car yet
All coming out to roughly $3500 on top of the 11k he payed for the car
EDIT: I guess there is no reason to post more pics of the car with the link provided by walker... LOL
The front bumper was spray painted at the time, and a lot of it has flaked off since the pics were taken the last time the car is up for sale. But that wont matter once we paint it.

Also, we put the trunk panels back in.

I am posting for a friend who is not on this forum. But I figured there would be a lot of interest here so here we go. It is a 94 celica gt that has been converted to have an st205 drivetrain. Its best time at bandimere speedway here in Colorado(well above 5,000 feet in elevation ) was a 13.3.
Eveything is up to stock st205 spec, but above and beyond that...
mods:
Drivetrain
-Mines ECU
-Apexi AFC tuned to 11.5 a/f across the board
-3in downpipe
-JDM sheep dog "Prof" Blow off valve
-HKS intake
-custom 3in exhaust
-Spec stage 2+ clutch( approx 5k miles on it)
-Fidanza 9lb flywheel with removable friction surface
suspension
-Gab sport struts(front has been converted to st205 superstrut with new parts)
-TRD coil springs
-Gram light wheels
Brakes
Stock st205, but you would NEVER need better brakes bigger than these on a 3000lb car(w/ driver). And yes we weighed it. It made me and my 3450lb car(also w/ driver) want to cry. Same brakes as a TT Supra
The body is all stock st205, but im sure you are all wondering if it has these items(it does)
-Gt-four front bumper
-Gt-four hood(wrc)
-Gt-four spoiler risers
Things it is missing:
-The rocker panel molding, but the ones off of a 25th ani would be perfect.
-Also missing the projector headlights but technically, 94's did not have that .
-And last, it needs jdm tail lights

The rear gas tank could not be used with the st205 rear subframe so it was eliminated and replaced by a 10gallon fuel cell. Right now, it needs paint. But he will be having it painted before sale to recoop some of the massive amount of money he is losing in this car. It will be repainted by a guy who does work on all kinds of vintage and exotic cars. I have been told that a ferrari was once shipped to him from California for his quality of work

I only have one picture of the car at this time, and its not a good one. Once he gets the car up to me I will take more pictures(old friend from high school. He goes to school in Denver, I go to school in Fort Collins)

The reason for selling is that the car has put him into very unstable debt and he is having financial trouble trying to balance College and car payments
Asking price is $14,000 with new paint. He will accept offers without paint if your speedy about it
Thanks guys!

A friend and I are going 50/50 on a spare st205 motor soon because we are getting a deal on one. All the parts that we are not using are up for grabs including the st205 intercooler! Once the engine is here we will be able to know the pricing on items depending on the condition

Not avaliable(we are keeping):
-Longblock
-Turbo
-Transmission
-Starter
Let me know if anyone needs anything,
Thanks guys

**EDIT**
Parts motor is here. We have many parts including:

Basically everything is up for grabs besides the longblock, turbo, starter, tranny.
ask if you need something

Parts we definitely have:
--complete front wiring harness(body too!!!)
-top mount water to air intercooler
-intercooler pump
-map sensor
-knock sensor
-Ignitor
-coil
-ECU
-intake manifold
-throttle body
-fuel rail
-540cc injectors
-engine and trans mounts(see pic for the ones i have)
-transmission cooler
-electronic speedo sender
-shift cables
-shifter
the best way to get a hold of me is by phone
(720)936-8199
or search for my thread at alltrac.net

My clip came with a map sensor. It was very complete. It even came with a blitz ecu, blitz bov, apex intake, and sport steering wheel. I ordered just the motor, then they told me that just the engine did not come with the map. So i upgraded to a front clip instead. Glad i did because that way i got the wta ic heat exchanger and pump, and after selling the body panels and the trd superstruts struts, the clip ended up costing the same as just a motor after shipping

Edit: Also, I dont need the rear subrframe. The brakes and rear diff would be nice, but i can squeeze by without them. Then you must consider that most of the people looking to buy the clip are looking to use it for a fwd swap, so they cant use it either. The awd swap is VERY hard. I was impressed you were so eager to tackle it

When the price gets reasonable I might be interested in the front clip and the rear diff. You met my friend kevin(black st205 conversion) and I when I sold you the bumper off of my front clip. Kevin and I have been looking for a front clip for parts for quite some time.. We would be able to haul it all off since we are local

For anyone who is interested, I have seen this stuff and it in very good condition. Not sure about 5k though.. (My clip was 3600 WITH body panels. I was able to recoop the high cost of my clip by selling the body panels so it ended up being around 2100 total invested)


That would be hilarious if you ended up buying the bumper off of my front clip too Hope the GT-FOUR hood is treating you good

Also, I know a friend(local) that has 2 ct26's in his posession that are in very good condition with minimal shaft play if any. Im sure he would be willing to sell one. We could ship the downpipe with the turbo and save you a few bucks in shipping

wow, the buying/selling threads seem to be moving faster these days.. maybe its just me.

If anyone knows of a company who can get me the starter(not fensport) preferably in the united states or know anyone who has one or can get one PLEASE let me know

yes it is 3 inch and yes it comes with the mounting bracket as i said and as you can see in the picture