6G Celicas Forums

i have check all Vac lines ... my vac is 18 on idle where it is suppose to be ... so i am really lost where that is concerned

hey guys my car is having alot of trouble getting into boost ..... there is alot of hestiation to get into boost ... wat do u guys think could be causing this ?

umm guys i am goin to put that turbo on my car .... i was thinkin bout it .... but i really requires to much work .... so to hell with it .

hey guys i jus bought a super T70 turbo to put on my 3sgte ..... now i am kinda worried bout it being to big and damaging my engine ....... how do i go about place this turbo on my car i am plannin on running stock boost nothing much ..........do i jus neeed a boost controller ? cuz i also have a Super AFC 2 will that help ?

jus recently my car start to do this **** ! .....the car has begun to back fire under boost , i mean it is so violent it scares me sometimes. wat could be the problem , and now it has begun to smoke white at idle after driving it with the back firing thing ..... WAT COULD BE THE ISSUE NOW

ok so i am boosting to 10 psi , right . so at idle the Feul pressure is suppose to be 43psi.

hey guys i know that noone really answers to my question on this forum but i jus wanted to know, what was the normal fuel pressure at idle ? Because my fuel pressure regulator is saying 60 psi. which i kno is way to much .
Could anyone help me out ? Thanx guys

hey guys my car is almost completed but i am getting a few issuses where boosting is concerned. When the car is about to go into boost .... there is this hesitation that takes place before it actually begins to boost. Now Question : What is the correct fuel pressure at idle ?

hey i am tryin to install my Air/Flow Ratio Gauge along with my new Super AFC 2 . But the problem is that i can seeem to locate the Oxygen Sensor Wire on the ECU

Can someone please help me wit this ?

well i jus checked my breather hose and that had a big crack in it .. but i have replaced that aleady ......and nope that wasn't the problem

hey guys i am tryin to install a Super AFC 2 and a Air/fuel ration gauge ... but i can't seem too kinda the colour of the wire nor where all ECU diagram say it suppose to be .... i am jus not finding it .... i have a 2nd Gen 3SGTE ECU

it sometimes idles at 1000 , then drops down to 800 or lower

it is at 10 Vac.

hey guys , after all my checks and so on ...i still have a boost leak some where ... now the difficult thing is that where i live there are no guys the dynos ...to make it easier .......so how would u guys suggest i find the problem or leak from where it is hiding ?

yeah they should .. i don't see why not

get vid man ....... that vid actually gave me chills man lol

pluged up my HKS SSQ today ..... so anxious to hear some noise ..... but then realized that @ 0 vaccum ... where boost begins to build ... it stays @ 0 vac. but then u hear it go through the BOV. Can anyone give me some advice as which line to use for the BOV , on a 2nd Gen 3SGTE.

hey .... is the wire a solid green or green and other colour ?

and keep in mind that i have a 3SGTE 2ND GEN SWAP

Hi guys .... i been tryin to locate this wire for the longest time , does anyone know which colour it is coming from the ECU ?

thanx remy .. but let ask u .... there are vaccum lines that go on the back of the power steering pump ...... is there any special order as to how the vaccum lines should go ?

thanx guys humm let me see today if i could get a hold of those wires

hey guys i am tryin to find oout the colour of the water temp. sensor wire ... to plug into the water neck on the side on the head on the 3Sgte 2nd

Nice , Simple , Clean ................. Liking the No Spoiler Attitude lol
Keep up man

wel i bought the car wit a 2nd Gen 3sgte ...... and found that it need to be rebuilt. So i spoke to my dad bout it , and he had this friend who is a mech. , so i toke the car to him , it sat there for almost 2 months ..and the guy had only taken out the head. .. So i got pissed and towed it back home ....and continue the rebuild by myself with a new mech. , he is pretty good but right now i think he is rushin the project.

yes i did ,it is on time.