6G Celicas Forums

aus - supaSAMURAI
DangerboyJr - Tiberius360
manphibian - manphibian
shin - shin6gc
jesterwr21-jesterwr21
stetsonaw - stetsonaw
j0e_p3t - seph_joe
Celiracer18 - Skillkills
tim - TooLow94
JDM321 - TONSHUMFUN
supershannon77- supershannon77
Defgeph - Defgeph
Nickjames - jackwalker7******CoD4 and Burnout Paradise are the shiznit!!
Supersprynt (same)
dustin15brown (same)
TheHorniak - only GTA IV for now. fun game.
BlueCeliGt - CelicaGod usually on CoD4 and UT3

i second that, killed two 5s's that way and once the bearing goes you can just scrap the motor cuz it'll take the crank with it

I dunno if any of you have seen this horrific crash but John Force is lucky to be alive. He had a near repeat of the same accident that killed Eric Medlin

http://www.youtube.com/watch?v=XIMmCn0VMjo

i think i might be able to find a random homeless guy or at least someone that looks homeless...its the coal region these things happen, haha

count me in for this should have the 3s in with body kit paint wheels and sus. so it'll be her introduction

i just changed over to verizon and got hooked up with a deal through my mom's work. Ended up gettin an LG Chocolate for 52.99 and its nice, the touch keypad takes a little getting used to but its small and light has a good quality camera and has some of the best reception as far as phones go

Yea, that was me that hit the divider and only damaged the rim, my girlfriend said i was about a foot and a half from the front of the tractor trailer at one point, if we hadn't picked up speed while spinning it would've caught right on the passenger side door so all in all i was pretty damn lucky...

this isn't my first incident with a car and won't be my last most likely but there are way too many to list haha

well the front steering rack is definately out of alignment, along with a possibly bent control arm, strut and strut mount seem to be ok and the wheel is in a world of hurt...still has a small leak but its deal able until i get a set of tires this week

yea, you have no idea how hard it is to find a dual drilled 17" Konig Monsoon, haha...

On thursday night in the rain near quakertown, pa on I-78 i hydroplaned and slid sideways across 2 lanes in front of a tractor trailer, coreccted it then slid again and hit the cement jersey barrier in the middle of the highway...miraculously i hit at just the right angle where the impact was on the wheel only(no body damage thank god) but i'm pretty sure i bent the control arm and damaged the tire...drove it an hour home, seemed to drive ok for the most part but the tire is now rubbing on the inner fender plastic. all in all i was very lucky but i attribute the ability to save it for the most part to my autocross experience. Hopefully she'll be back together by the end of the week

hmmm...i wonder how many he considers a few

older 50 cent. 2pac. busta rhymes - Touch It any version

what kind of JL's. what size amp. and what kind of box(ported or sealed)

bbbump

I have an invader that i might be taking off my car shortly it has some damage but i have fiberglass and body work experience so i'll fix it and prime it for you. i have 2 sets of z3 fenders if you'd be interested in them too one set has the side markers shaved. i'll sell you everything for 200 plus shipping

Well here's the story.

I have a spare coupe GT shell that needs some front end parts and a drivetrain. its 5 spd and interior is in good shape. The motor from that car happens to be in the blue GT hatch which i was thinking of doing a 2jz swap. And before anyone gets flame happy money is not a concern due to me coming into a little money from the passing of a relative. My father is an electrician and automotive and automated machine mechanic. He has fabrication experience as do I. we also have the tools available to make an parts needed. Oh yeah and my one friend hooked me up with a 95 eclipse GST for doin some work for him.

So opinions or ideas would be appreciated and if anyone from the PA. NY, NJ area would be interested in getting involved let me know

well i swapped throttle bodies to see if it had any effect and it actually did have a big effect. now it seems to idle better(prolly due to a cleaner IAC valve). Still sputters sometimes but still running better

bumpage

still no good, swapped out distributors and no change, ran it for codes yesterday amd still no luck. gonna let my uncle take a look at it tomorrow seeing how he is a certified mechanic and has his own garage. hopefully we can figure somethin out

So here's the deal...

When she starts up first thing in the morning she runs great. But as the engine warms up it has a rough idle(a bouncing effect) and when i hit the gas it'll sputter then catch but still not at full power. Cleaned the intake filter(aem cold air) changed plug wires and cap(no rotor tho), plugs are a month old and were pulled to have gaps checked. It started after we got a big snowstorm here a few weeks ago so i was thinking possibly a problem in the fuel system but looking for other ideas

Thanks

Eric