6G Celicas Forums

problem solved... the issue was that the acc cable was wrong connected... must be conect to the blue wire, so blue for acc in the greddy turbo timer to blue in the switch car, then green to ON cable that is the black on the switch and the red to constant 12v that is black and red in the switch. With these cable conected the fan will work without the switch key... Now ill be working on the lock issue that happends when the car turn off the doors go to unlock

Just take some pics after wash my celi so here go some pics! hope like it guys!






Uploaded with ImageShack.us



Uploaded with ImageShack.us

The engine is dirrrty

270,000 +++ with stock engine just blow it up a year ago... Now running with a 4th gen 3SGTE with 15k! running just great

Yup nice info! i forgot to put that!... Yup i buy the gasket with my new thermostat!

So, i must replace the thermostat from my 4th gen 3S-GTE. I was doing some research around the web and i found the part number for this thermostat, is: 90916-03100. This one can be found in the 2UZ-FE, 3SGE from 94-99 Celicas, from the ST205 3S-GTE (94GT-Four) and from the Caldina ST215 4th gen 3S-GTE. I found those engines that shares the same thermostats! i dont know if another engine use the same one.
The 90-93 3SGTE (2nd Gen) do not share the same thermostat!.

I just post it for the record! and to give a little info

Fran

i check all the wiring! and its ok!... I dont know if i must put the on switch into another calbe, because when i get the key to off and remove the key the countdown starts but the cooling system do not work when the switch its off! so if i left the car over 5 min without the cooling system working im shure that the car will over heat!... Anyone know anything about this problem?

so i can buy an act clutch kit for a 5sfe?

hello! i just need to know if any clutch kit for mr2 3sgte or for st185/st202 will fit into my 4th gen 3sgte... im using my old gearbox from the 3sfe rigth now what i must do? whats the best brands of clutchs for it

Thanks

Fran

Hi! i just saw a brand calls energy suspension that made polyurethane parts for a lot of cars, anyone try these on the celicas? what other brand can be founds!

Regards

Fran

Welcome! Nice and smooth celi! i like it! ... Yeah! dem gods these cars! and thats trueee! your in the right place!

Yup, but when i pass the switch to off the brake ligth in the dash turn off, so if i quit the hamd brake the car dont turn off :s... The air conditioning system dont work and the cooling system dosnt work! so i guess that if i let the car running with the turbo timer 3min for cooling down the turbo he can get a re-heat :S

hello! i just finish to install my greddy turbo time on my celi!... I follow carefully all the intruccion!. but got problem with the instalation!.. When i put in off the swicth the turbo timer starts is countdown, thats fine, but all the function of the cars dosnt work! like the cooling system and the handbrake safety do not work too :S the speed sensor that comes with the timer dont function and the secure doors lock open when the car its finish is countdown and turn off :S anyone have install these timers? a little help will be apreciated!
Thanks 6gc friends

Fran

im running a 3sgte. i need to look for some good traccion, because the whells just spin out a loooottttt :S

hi 6gc lovers!

I must go buy some new tires, im running 17 inch whells, so i need to know the bigger size of tires i cant put into it without problems... i found a nice 245/40r17... i need some traccion so i whant to buy wide tires with a good treadware... im running now with 215/40r17 treadware 420 :s i think its too hard! so the car dont lauch good... other thing that i need to know its if anyone have used drag radials or drag slicks on the celi! whats results so you have? opinions abouts type of slicks trademarks, what tire would recomend

Thanks

i run 15.5 with the stock 4th gen 3sgte, with no traccion at all! :s. I hope i can get 13.5 at least!... The celica its a heavy car! but in the rally the put it on a diet with 1200kg! thats not too heavy! and its an AWD... My car its FWD i think i can start a diet too! hehe. Niceeee! sooo i go go to put some psi to see the results!... Hope 14´s at least

ok!... ill turn the boost up! go to tune up it for the new psi and ill go to try¨

i just finish my 4th gen 3sgte swap, so i go to the drag racing this past weekend... In the stock engine (3S-FE) my time was 17,2 :s. Now with stock 3sgte 4th gen, in all stock conditions (oem exhaust system, oem admision system, running oem 8psi of boost) my time was 15.5 with no traction at all! :s

I talk with the dealer, he said that he's looking for the ecu but he not find it in is shop :S And he will be responsable for that, so im looking for another ecu in case he not have it. He must buy me one and send to me!...

I buy the swap and the dealer send me a 3sge red top ecu :s im looking for M/T 3sgte 4th gen ecu but its difficult! so what i must do? buy stand alone ecu?

Hi Friends! Like the topic said, i'm just looking for an 4th Gen 3SGTE Manual Transmission ECU>>>

THANKS!

Look Great!... Nice Job Men!

Hi... im just wondering if the ecu from 3sge red top and 3sgte´s are OBD...OBD1 or OBD2... anyone knows?

Anyone know the part number for those bearing? front; left and rigth. (97 ss-I)

Hi! i need the wiring diagram or the ecu pin outs from a 3sfe engine. Anyone have it? or know where i can find it?

Thx!

any idea where i can get that stuff? .... the two axles and the middle mount