6G Celicas Forums

are they actually duel drilled for 5x100 and 5x114? or are they just one actual usable set of holes? also whats the offset?

b to the izzzump

hey i'm looking to buy an exhaust, looking for a greddy sp2 unless you have something else that will fit a 94 canadian gts. Oh and Cat-back.

lemmi know asap thanks

hahah congrats your cookie is in the mail.

took it apart today its just the ebrake pads sticking because there isnt much left of them and I just tightened the ebrake, I cleaned them up, I'll put pads on it later. Everyone else I talked to has never heard a wheel bearing thump either, So thumbs up to me for figuring it out I guess lol.

hey, there is a weird sound comming from the gf's 94 canadian gts, it is a revolutional sound, and its comming from the left rear wheel. If I grab onto the wheel and spin it back and fourth occasionally it will seem to lock up and stop but it seems like only when i spin it back forward. Now it seems to be making a thumping sound which gets faster as you drive faster. Is it possible the ebrake is sticking randomly? or does it sound more like a wheel bearing? it only does it from the drivers rear.

done that did help alot but now i think it needs a wheel bearing, please refer to new post for help

what part did you grease? and what kinda grease?

yea he pmed me and said thanks i was indeed right. I only knew so fast cause I tried to the exact same thing, I felt some stupid after I figured it out though lol. Probley why he never publicly posted it.

ebay ftmfw!!!

so you have ground control coil overs now or springs now? do you have this issue as well?

gfs car is rocking 19s, on 215/35r19 tires with coil overs as low as they will go and no troubles.

I bought some from ebay and it worked out fine, post the link to the auction you bought from.

hey, this is actually for my gfs car. She has a 94 canadian gts, we recently lowered it on kyb gr2s, and ebay coil overs, yea I know, didn't wana shell out big bucks at the time and wanted the adjustablity of coil overs, if it could be done again I would just bought a nice set of d2s or something. Anyways the issue with the car is it is making weird sounds that I don't know where they are comming from...I work on nissans all day and they are set up different. Sounds like a dinging sound comming from the suspension. Mostly when your driving slow and you cut the wheel sharply. I'm guessing this is a fairly common issue, is there anyway to fix it? I've tried raising the car on the coil over, and making sure everything is tight on several occasions, but if anything its gotten worse. Also is it bad for anything?

thanks guys.

ok i would put down 50 bucks that I have the answer to your problem.
Take the kybs that your trying to put on the front, and put them on the back because they are the back struts. The holes on the back are further apart. Next I'm guessing you have two skinny little boxes that just look like a shock alone. Thats because there strut inserts, or cartridges. Take out your front struts and there is a little nut that holds the insert on, you can remove it using a set of channel locks. New nuts should have also come with the strut. Remove old strut cartridge and install the new one then install the new nut, if you didnt get new nuts just use the old one.

I attempted to do the same thing as you are doing the first time I did it so I know exactly what is going on. I also looked up the part numbers because I thought I had the wrong stuff.

well i triple checked the connections remounted the ballasts to what i thought was a better spot, upgraded the main ground, and sercured everything good this time and yea no more pulsation.

good idea actually, i think its both that are doing it but ill double check tonight when it gets darker. I also Upgraded the main chassis ground, the old one looked pretty tiny and a little rusty so hopefully that helps some.

ok im gona double check all my grounds, upgrade where nessicary and perhaps upgrade batteries.

hey just put a hid kit in the lowbeams of a 94 gts (canadian), my problem is that its pulsating just a tiny tiny bit around the very edge of the light, you've got to look pretty hard to notice it but it is there and most of the time, it seems to sort of come and go. Is this normal? is there a way to fix it? thanks very much for any help.

hey sorry to bump this old post, but it is the only, step by step hid install for the 6th gen I can find and the pictures arnt working for me. Would it be possible to rehost them? thanks very much.

or also a link to a install of a kit on another 6th gen would be awesome as well.