6G Celicas Forums

What do you think about this product?: http://www.reveltronics.com/en/products/un...computer-utcomp
I'm searching some gauges to control battery health (voltmeter and so on) and find this one, an on-board trip computer which could show inside/outside/engine/oil temperature, fuel consumption measurement (average and real-time), velocity, distance and accelerations measurement, trip meter for off-road, voltmeter and much more.
It doesn't need OBD (and this is important for me because here in Italy we don't have OBD celica.

Someone who already have tried or know about it?

very good work!

Yes, they seem to be at the same height. Good!
However, here a less photoshopped pic of Eurou type 2 skirts!

I have these one (not my car :-), only pic from eurou site

great!!! very good work,
I hope they could be ok with eurou ones too,I could be interested

ATTENTION, be careful to put the right volume addiction in the zone where skirts should be (both original or bigger "tuning" ones), or it could happens mounting error of skirts

Recent tendence is line of light with no interruption, in signal but also in front, rear light and also in drl.
Audi style could be a reference, see the TT mirrors

Very very interesting, so you will made entire fenders?
If so why don't you think also if could be possible to integrate "fender side vent"?
I say so because only a few are available and nothing really beautiful.
Instead I'd like to see something elegant like nissan gtr

or opel gt (saturn sky)

or jaguar xk or cf concept



wide arches + side vent = would be amazing <3

I'm really interested, I want to do the same from a lot of time ('cause I want to eliminate turn signal from fenders, .. yes I'm in Europe) but never had time, and probably I will not able to do such a beatiful work.
I already have a second pair of mirrors (a power folding one) but never installed (they come a little cracked from ebay, without the relay wich I find later, and don't know if they could play).
So I'd prefer to buy a third one ready to plug and fully operating.
I'll email you.

some questions:
1)how many colors available for leather? perforated leather and/or mix (leather/perforated leather) too?
2)it's possible to have t23 front + t20 rear and the colors will be exactly the same?
3)it's possible to have red stitch or other colors?
4)it's possbile to have embossing or sequined emblems or names?
5)it's possible to have interior particulars (handbrake, shiftboot, steering wheel, doors) or at least to buy from you the same leather (and provide to myself)?

thanks

Why not like mine?

Batman, do you have these brakes lines?

WORK IN PROGRESS #2

Are available both the 2din console frames? How much for send them to Italy?

Other colors different than black?

LOL, how it says: "less is more!": good!

Wowww!!! great work!
Stripes are orrible, without is better, 7afe valve cover is more ugly than 3sge or other toyota engine.
I searched many times a modern (carbon, fiber, plastic or others) valve cover (like scion trd cover) or "fuel rail cover" to give engine bay a more "modern stock" style, but found nothing.
To shave the stock valve cover is a great idea, to insert a CELICA or TOYOTA or TRD letters and then powdercoating all could be the paradise!!!!

I've never seen shaved valve cover for 7AFE before.
It's some aftermarket piece? Or it is manual work?

EUROU pieces, taken from japanparts (however this is type2 not type1)





about 250euro of pieces, about 350 for sending them from japan to Italy, about 550 of doganal fees and doganal work services from an import/export company (thief!!!)

yeahhhh, about 1150euro of goodness stuff!!
It hurts, oh yes it hurts very much!!!!

Fantastic idea!!!!

Ok traslation done, sorry for my poor english

LOLLLL
I'm happy you like it, but you must wait at least this summer, maybe after.
In the meanwhile see this, 2nd part of modifications (I'm only the designer, not the man who work phisically on the bumper, so these are my instructions to that man),
I don't think you can read in italian but maybe sometimes a pic is better of thousands words.


P.S. I promise to translate it in english if could be useful to someone

work in progress!

not properly, but I'm modifyng the c-one bumper to insert a Ford Fiesta ST grill, that has almost same dimensions as c-one hole, so only few adjustments need

Thanks for the link, so the gap is this


Someone has tried to solve? (I don't know....leather stripes? or something similar?)