6G Celicas Forums

Bump.

-TC

Well,

Looks like pricing on these are being driven down by current sellers. In order to make these competitively priced, I'm dropping the price to 80 shipped.

Again, please email me at tckinnare@gmail.com

-TC

Hey Guys,

I have a set of 1994-1995 Toyota Celica ST/GT fog lights with brackets and harnesses. These are very hard to come by as they were only a BTO (build to order) option in 1994 and became JDM only in 1995.

The lights are fully functional and the glass is in good condition. The housings have some silver overspray from the factory but this doesn't affect the light output. one of the bracket has been slightly tweaked and retweaked back into normal position - their pattern was correct on my car with no front end damage.








$140 shipped.

Please email me directly at tckinnare@gmail.com and not here

-TC

Haha,
you guys brought this back from the dead huh?

The header makes a noticeable improvement in the high RPMs. To be honest, I miss having it on my car.

At $300, it's worth it. Anything more and I'd say it's a little pricey. I kinda got lucky with what I got out of it, but the buyer is very pleased, and ultimately he got an extremely rare item - something which falls into a niche market that few people here and there will pay more for.

-TC

Hey Guys,
I replaced my carpet a while back with a black one. Just gauging interest on if anyone wants a tan stock carpet. It's in good condition, and I'll clean it before I send it out. No stains or anything, car had 105k and the previous owner cleaned the car meticulously, carpet is in great shape.

Shoot me an offer.
I don't mind shipping, but buyer covers cost. $28 due to the size of the box.

-TC

The carpet looks better than this, the lighting is making it look darker and dirtier than it really is.

Sold to Promasta. Enjoy!

-TC

I have a few other people interested. I'm going by PMs first, then replies to the thread.

The shifter is bent to avoid the hand brake. I've never had a problem with it hitting or even coming close...

I don't have any pictures of it without the boot installed, but if everyone else falls through, I'll get one to you.

Thanks,
-TC

Hey Guys,
The shifter has been used (by me, I bought it used) since about August 13th 2009 within my car, 6gc. I bought it on eBay with the original box and instructions (in Japanese) which will be included with the sale. I'll also be parts washing everything and re-greasing all of the moving parts - making it ready to install.

There is only one difference between this one and the normal "JDM/TRD short shifter" and that is I removed the leather from the knob itself. When I bought it, the leather was falling apart with holes it in. I removed it from the knob, and use it without any leather covering - it's the exact same as a derlin TRD knob. I also removed the TRD badges and put them back on the knob in the original place. You'd never notice a difference except for the leather. Shift knob is in good condition and looks fine.

I believe this is a V1 knob, so it's 40% shortened throw. This definitely helps, but the even bigger improvement is the metal shims, they make the gearbox more precise when shifting. You feel the walls of the gates more, and know where they are placed. You can't just throw them haphazardly into a gate like with a standard shifter, but once you figure out proper placement, your shifting speed will increase.

If you have any questions, let me know. I'm located in the Bay Area, if anyone wants to pick it up, I'll knock off a little bit of money.

$150









-TC

The muffler is still for sale.

If nobody wants it, I'll probably be putting it on my next car in a few weeks.

-TC

Sold to azn87.

-TC

Sure.

-TC

You guys caught me.

I want it out. Someone make me an offer on it.

Should also mention that I have a JDM armrest that's still for sale. Do a search for me under the buying/selling thread and you'll find it. 1 broken tab (out of 4). Still functional, aesthetically looks perfect. New cup-holders that actually work compared to the USDM ones.

-TC

Bumpskies.

-TC

Sold locally for $400. Hope that works as a reference in case anyone tries to sell one.

Mods can close.

-TC

I'll set the price at $100+shipping (~$130 total).

Again, it's fully functional and there are no noticeable blems once it's mounted.

-TC

Everytime I post something I get a super lowball amount from you. I'm not going to sell anything to you on the basis of your responses thus far.

-TC



On that note, I'll give you $20 and a half eaten sandwich for your car.

Shipping will be between 30-50, I'll wager high and refund the difference (ie. pay for $50, costs $35, buyer gets $15 back).

So come up with a number you feel is fair, tack on the money for shipping, and send the offer my way.

Due to current condition, I don't want some ridiculous amount of money for it, just whatever seems reasonable.

-TC

I'd be shipping out first class with a tracking number and insurance up to the purchase price. I could go cheaper, but I want it to arrive in the best condition possible.

I'll also be spending money on a box and packing materials, all of this will add up to a reasonable amount.

I'm estimating $50 for everything, but if it ends up being less I'll refund the difference back to the buyer.

-TC

I didn't even catch what you guys wrote, but I probably appreciate you taking it down.

This is why I put up OR BEST OFFER. Seems people often overlook that...

The header in and amongst itself I value at $350. There are not any other ones I've ever come across. Yeah, I got a killer deal from someone who didn't know what they were selling, but I'm going to Japan in a week and need some cash for it. Hence, make me an offer I can't refuse... doesn't seem too hard to me.

If you're interested, make me an offer. It doesn't have to be the $350 I want, that would just be an instant sale to anyone who offered it.

You also need to keep in mind that shipping is going to set me back roughly $50-$60 just to get it to you. So even at a high price like $350, I'm only making $300 max.

Take it easy,
-TC

TTT.

-TC

TTT.

-TC

Bump.

-TC

Bump. Shoot me offers, have to fund a trip to Japan.

-TC

All PMs replied.

I would like to be making $350 OBO shipped for this guy. It's in 100% perfect condition, and in the 2+ years I've sent on this forum, the only one I've ever seen for sale.

Think that price is too high? Shoot me your best offer and maybe we'll work something out.

-TC

Hey Guys,
Just as I said, I'm selling my rippmods header for the 5sfe celicas. I had it installed over the course of about 6 months without any issues, everything bolts right up to it. The tig welds are in perfect shape and of much higher quality than the ebay ones.

These headers really open up the top end. With the normal "tree trunk" header, after you hit 5k rpms your car won't make any more power. These open up a completely different powerband from 4k-6200 without any loss of lowend either.

Once you remove your stock headers, you'll also notice just how heavy they are. These rippmods will shave off about 2/3 of the weight of the stock headers (rough estimate being 15-20lbs).

I'm selling these as Best Offer. If you're interested, shoot me what you feel is a fair price with shipping included.

For those that don't know, rippmods had a very limited run of headers that they made for the celica. My estimate is less than 100 in total. Don't be fooled if you see "5sfe rippmods header" as they are typically only for the camry's, which have a different exhaust route than our celica's.

The main difference between these and the ebay SS ones is the quality of materials used. The Rippmods used better, thicker metal when constructing these, had the ports closer matched to those of the exhaust ports from the 5sfe head, have better welds all around, and aren't prone to cracking or breaking like the ebay ones. Thus, they will cost more money, but are pretty much guaranteed to not give you issues in the long run.








I'll also be including the O2 sensor gasket, and SAE mounting hardware to your flex pipe (your stock hardware on your OEM header won't work). if you have any questions, please feel free to ask.

Thanks,
-TC