6G Celicas Forums

So even though the skirts and grill etc are factory fitted, they are not sold with the car but optional extras?
Also, what should I declare the splitters as? (still not sure exactly what they are, are the rubber/ plastic at the bottom of the front, if so doe sit count as an air dam?)

Thanks.

thanks whatthe! I'm not sure what the oem means, is that factory fitted? Also, here are the options my insurance company gives me:



Which bit on the car is the euro splitter?

another couple of pics (the second one was just before I bought it, damn it looked so good, must do a polish!:

..sorry, forgot to say, pic is in my profile.

Hi
Is anyone able to tell me whether my car has the original factory fitted kit or whether it is an after market thing? Having seen a few other cars like mine, and I thought just the side skirts had been added, but not sure at all. I need to know for insurance purposes.

Thanks!

edit: pic in profile

how do i check for that?

i checked the rotor and it seems fine. I have been watching the revs a lot more closely recently and noticed that the needle fluctuates very slightly when idle, sometimes it goes right down and almost stalls. interestlingly it hasn't ever stalled when parked, usually when coming to a stop or slowing down.

Never happens except when the car's temperature is at normal operating. Never happens when stepping on the gas, in fact if it happens and I get to the gas in time I can rev it and it stops from stalling. I can't repeat the stall myself, it mainly happens when slowing down or coming to a stop like when I'm parking, but sometimes it doesn't happen at all.
No mods, cept a bodykit and alloys.
I recently had the following changed:

engine oil
oil filter
air filter
brakes

and just recently:

timing belt kit
fanbelt
gearbox oil

the problem was there before the service but seems to be worse now.
On an average 30 minute stop-start local drive, it stalls about 4 times. Mind you, I was driving it less till I had the timing belt changed.

Thanks

Hi guys
My first post and happy to be here!
My 3s-ge starts and runs fine, but it stalls every now and then. Always when it is warmed up. The revs just go right down and it either goes off or splutters a bit and recovers.
Any ideas?
Thanks.