6G Celicas Forums

Welcome Guest ( Log In | Register )

2 Pages V   1 2 >  
Reply to this topicStart new topic
> motor swap advice pleaseeeee!!!, motor swap
post Apr 17, 2013 - 7:32 AM
+Quote Post
96celiest

Enthusiast

Joined Apr 17, '13
From Bloomsburg PA.
Currently Offline

Reputation: 0 (0%)




hi my names logan i have a 96 celica st 5spd. i wanna put a faster motor in it. should i use a) a gt caldina motor b) a toyota supra beams vv-ti or just whatever is best.. please help me out im new with the whole celie world and im trying to do my celie some good lovin tlc. so please get back to me. Thanks!
post Apr 17, 2013 - 9:10 AM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




First off, welcome to the forum.
Secondly, read up on some of the swap threads on here too, lots of useful information.

There is no "Toyota Supra" Beams Engine with VVT-i, it's the Beams Redtop Engine with VVT-i that was in some of the SS-III Celica's and possibly a different version too.
The Caldina motor is the ST215 engine (3SGTE), which I do not believe has been documented too well yet on here, but I know a couple people have messed with them before. Your best bet would be to go with the ST205 3SGTE engine, which is out of this generation's GT4.
You could also go with the V6 route with the 1MZFE if you want to keep it N/A as well as have an engine that is in the USA and has parts that are easy to order at any auto parts store.
post Apr 17, 2013 - 9:13 AM
+Quote Post
PaddyTapps

Enthusiast
*
Joined Mar 6, '13
From Tampa
Currently Offline

Reputation: 0 (0%)




Welcome to the world of 6GC's Logan. this should help you out too:

Feasible Swaps
post Apr 17, 2013 - 9:19 AM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




the 1MZ will be the simplest of V6 swaps, but if you get creative in shopping for parts, installing a 3MZ with 1MZ intake manifold and electronics will be the best combination. the 2GR is the newest V6 and makes more power but its a difficult swap. its a DBW setup.


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac
post Apr 17, 2013 - 9:36 AM
+Quote Post
Malek



Enthusiast
***
Joined Jan 26, '09
From Los Angeles
Currently Offline

Reputation: 1 (100%)




QUOTE (mkernz22 @ Apr 17, 2013 - 10:10 AM) *
First off, welcome to the forum.
Secondly, read up on some of the swap threads on here too, lots of useful information.

There is no "Toyota Supra" Beams Engine with VVT-i, it's the Beams Redtop Engine with VVT-i that was in some of the SS-III Celica's and possibly a different version too.
The Caldina motor is the ST215 engine (3SGTE), which I do not believe has been documented too well yet on here, but I know a couple people have messed with them before. Your best bet would be to go with the ST205 3SGTE engine, which is out of this generation's GT4.
You could also go with the V6 route with the 1MZFE if you want to keep it N/A as well as have an engine that is in the USA and has parts that are easy to order at any auto parts store.


But there is a VVTi Supra Engine wink.gif 2JZ VVTi

Anyway, welcome to the forum Logan! I recently completed my 3rd Gen 3SGTE swap. It has been done numerous times on this site and is well documented. You can easily do it with the resources on this site.

I came from Subarus so all I really know is turbo haha 3SGTE was my best option. V6 turbo? Now that's an option haha

Good luck thumbsup.gif


--------------------
post Apr 17, 2013 - 3:12 PM
+Quote Post
mkernz22



Enthusiast
*****
Joined May 10, '10
From MA
Currently Offline

Reputation: 37 (100%)




QUOTE (Malek @ Apr 17, 2013 - 10:36 AM) *
QUOTE (mkernz22 @ Apr 17, 2013 - 10:10 AM) *
First off, welcome to the forum.
Secondly, read up on some of the swap threads on here too, lots of useful information.

There is no "Toyota Supra" Beams Engine with VVT-i, it's the Beams Redtop Engine with VVT-i that was in some of the SS-III Celica's and possibly a different version too.
The Caldina motor is the ST215 engine (3SGTE), which I do not believe has been documented too well yet on here, but I know a couple people have messed with them before. Your best bet would be to go with the ST205 3SGTE engine, which is out of this generation's GT4.
You could also go with the V6 route with the 1MZFE if you want to keep it N/A as well as have an engine that is in the USA and has parts that are easy to order at any auto parts store.


But there is a VVTi Supra Engine wink.gif 2JZ VVTi

Anyway, welcome to the forum Logan! I recently completed my 3rd Gen 3SGTE swap. It has been done numerous times on this site and is well documented. You can easily do it with the resources on this site.

I came from Subarus so all I really know is turbo haha 3SGTE was my best option. V6 turbo? Now that's an option haha

Good luck thumbsup.gif


I know there is a 2jz with vvti lol but he said the beams in a supra so I just wanted to correct him on that tongue.gif
post Apr 17, 2013 - 10:57 PM
+Quote Post
96celiest

Enthusiast

Joined Apr 17, '13
From Bloomsburg PA.
Currently Offline

Reputation: 0 (0%)




Thank u everyone for the corrections and advice it will be well needed throughout this. I will be in touch everyone. I will do my research and relay my questions. Once again thank you the advice should be very helpful
post Apr 18, 2013 - 10:40 AM
+Quote Post
mgnt232



Enthusiast
*****
Joined Mar 16, '09
From New York
Currently Offline

Reputation: 23 (100%)




Welcome
deff read up on the forum. Theres so many answers to questions you would not even think of just in the stickies.
GL i would advise a 3sgte swap. IMO best for your money and not all that much needs to be changed.


--------------------
I've spilt my heart into this car :) And I don't ever plan to stop

- 6GC for Life -
>Semper Fi<

1994 Cupra :p 3sgte
1995 Celica ST DD
1969 Chevelle SS

alllll balls. P2 approved!
post Apr 19, 2013 - 9:45 AM
+Quote Post
96celiest

Enthusiast

Joined Apr 17, '13
From Bloomsburg PA.
Currently Offline

Reputation: 0 (0%)




Hi everyone hows the celies? hahaha i just thought id let you know i have decided to go with the 3sgte motor. now my questions. 1.) were could i get a reasonably good priced front clip and 2.) what do you guys think about right hand drive conversions from the front clip if it were even right hand drive. 3.)would it be hard or no seeing how its just on the other side? i know i would have to relocate alot of stuff like pedals and steering shaft but would it be worth it in the long run? mainly i just wanna find a good front clip 3sgte. Thanks guys links would be greatly appreciated if ya could help im only 17 and im doin this all on my own id like to get to meet some of you celie guys to. do u guys have any yearly meets or anything like that?
post Apr 19, 2013 - 10:06 AM
+Quote Post
JoshuaM



Enthusiast
****
Joined Mar 6, '12
From Brisbane, Australia
Currently Offline

Reputation: 6 (100%)




QUOTE (96celiest @ Apr 19, 2013 - 9:45 AM) *
Hi everyone hows the celies? hahaha i just thought id let you know i have decided to go with the 3sgte motor. now my questions. 1.) were could i get a reasonably good priced front clip and 2.) what do you guys think about right hand drive conversions from the front clip if it were even right hand drive. 3.)would it be hard or no seeing how its just on the other side? i know i would have to relocate alot of stuff like pedals and steering shaft but would it be worth it in the long run? mainly i just wanna find a good front clip 3sgte. Thanks guys links would be greatly appreciated if ya could help im only 17 and im doin this all on my own id like to get to meet some of you celie guys to. do u guys have any yearly meets or anything like that?


Read Ricochet1490's build thread if you are interested in the RHD side of things;

http://www.6gc.net/forums/index.php?showtopic=81373

Personally, I would start off simple and just go with the engine swap. It is very well documented on here, and will get you going quickly. Would it be worth it? You tell me, I don't believe there is any real advantage, other than the 'JDM-ness' (And possibly some ergonomics if that suits you). The conversion isn't so simple, and I'm not sure what your local laws are, but it is always more dangerous driving on the other side of the car to everybody else, which is probably not the best when you are still fresh out on your license.



--------------------


SOLD :( 1997 ST204 Celica ZR -----> See it here on 6GC!
2013 October Celica of the Month XD
Now: '00 NB8B Mazda MX5 -----> See it here in off topic!
post Apr 19, 2013 - 7:23 PM
+Quote Post
96celiest

Enthusiast

Joined Apr 17, '13
From Bloomsburg PA.
Currently Offline

Reputation: 0 (0%)




I still need to find out were and how I can get a front clip for an average price.

post Apr 19, 2013 - 8:43 PM
+Quote Post
96celiest

Enthusiast

Joined Apr 17, '13
From Bloomsburg PA.
Currently Offline

Reputation: 0 (0%)




[size="3"][/size]hey guys could u guys send some links for a 96 3sgte front clip
post Apr 19, 2013 - 9:29 PM
+Quote Post
Box



Enthusiast
*****
Joined Feb 23, '12
From Warrior, AL
Currently Offline

Reputation: 0 (0%)




1MZ-FE is the way to go. Much cheaper, and if anything ever goes wrong you can actually get parts for it. Unless you go with the 2nd gen 3S-GTE anyway. Then the 1MZ would be better at that rate. Still even against the 3rd gen 3S-GTE I'd take the 1MZ-FE. Only talking a difference of 50 hp(stock vs stock), and you can run the 1MZ-FE on regular fuel and get incredibly good gas mileage. Besides that the 3S-GTE is heavier and has lag, so that 50 hp extra really doesn't equate to much over the 1MZ-FE. Plus the exhaust sounds better, and that's what really matters at the end of the day. tongue.gif Being you're 17 cheap and reliable are your two best friends and the 1MZ-FE meets that. Don't have to worry about a turbo and all of the associated problems, and you can get parts cheaply from any local parts house. 200 hp in a 2,400 pound car is more than enough, especially for someone that just got their license. You get to **** with all of the Honda kids, get 30+ mpg on regular, and have a reliable engine that has parts everywhere. Sounds like a winner to me.

This post has been edited by Box: Apr 19, 2013 - 9:29 PM


--------------------
2001 Miata LS 5-speed
post Apr 19, 2013 - 10:33 PM
+Quote Post
96celiest

Enthusiast

Joined Apr 17, '13
From Bloomsburg PA.
Currently Offline

Reputation: 0 (0%)




I'm trying to stick with fwd though could I get a 3sgte and only hook up the front and disconnect the rear axle or would that do harm to the transfer case. I'm trying to do a good easy swap that won't leave me stranded ya know?
post Apr 20, 2013 - 12:09 AM
+Quote Post
Box



Enthusiast
*****
Joined Feb 23, '12
From Warrior, AL
Currently Offline

Reputation: 0 (0%)




The 1MZ-FE is used in FWD applications, just rip it out of a Camry/Solara or the other fortitude of vehicles that used it. Though only the Camry/Solara offered the 1MZ-FE with the E153 manual transmission. The 3S-GTE you'll have to use the S54 transmission from the GT Celica or another transmission that'd fit. You can't just "cap" off the AWD transmission, it'll burn out.

So, before we jump ahead of ourselves do you have the $3,000 to $5,000 or more to do a 3S-GTE swap? Even if you do think about all of the cars that'll buy, plus once you figure in what'd you'd get out of your car. That'll buy a 7GC GT-S or RSX Type S. Do you have the ability and knowledge to do the swap? Or do you have access to people that do? Not trying to put a damper on your spirits, but these are things you need to think about. We've all been there, wanting to take on a project at your age. I'm not too terribly far from where you are now myself. I've been there and done that, trying to do a project car as your main method of transportation is stupid(at any age). What's not fun is not being able to go anywhere because your car won't run. Unless your parents have the money to sink into it and have access to someone to do the work, I advise you sell the Celica and buy something else if you want something faster. If you want a good looking and reliable car that gets good gas mileage that'll take you through the rest of high school and college, I suggest you keep the Celica.


--------------------
2001 Miata LS 5-speed
post Apr 21, 2013 - 1:02 AM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




QUOTE (Box @ Apr 19, 2013 - 10:09 PM) *
You can't just "cap" off the AWD transmission, it'll burn out.



yes you can, you take off the transfer case, get an MR2 diff and cover plate and you have a FWD trans.



--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac
post Apr 21, 2013 - 2:21 AM
+Quote Post
Box



Enthusiast
*****
Joined Feb 23, '12
From Warrior, AL
Currently Offline

Reputation: 0 (0%)




Somewhere through the stickies it says you can't, so that's what I went with. Still, without the modifications you mentioned you would just burn it out.


--------------------
2001 Miata LS 5-speed
post Apr 22, 2013 - 9:27 AM
+Quote Post
Smaay

Enthusiast
*****
Joined Dec 8, '03
From Lancaster CA
Currently Offline

Reputation: 6 (100%)




you could somehow cap the transfer case and use it as a FWD but why? you would need ST 205 axles which probably come with the trans so that mute. but you would not "burn" anything up if you did that.


--------------------
2001 Celica GT-S Turbo
1997 Supra TT 6speed
1997 Celica 3MZ/1MZ swap
1990 Celica All-Trac
post Apr 22, 2013 - 11:11 AM
+Quote Post
1994Celica



Enthusiast
*****
Joined Aug 5, '09
From West Texas, USA
Currently Offline

Reputation: 20 (100%)




If your celica is your only means of transport I wouldn't engine swap. It sucks working on your dd especially major work. If you want to improve your celica, improve the brakes and handling.


--------------------
JDM Part King

post Apr 22, 2013 - 10:15 PM
+Quote Post
96celiest

Enthusiast

Joined Apr 17, '13
From Bloomsburg PA.
Currently Offline

Reputation: 0 (0%)




OK thanks everyone for the replays!! But um does anyone know were I can find the 96 3sgte rear wheel drive setup I can't find any anywhere? I can't even find a nice 3sgte yet alone with the rear assembly. It sucks being in Pennsylvania I cant find any parts cars there so scarce around here only a couple and everyone who owns them seems like theyve had them for awhile and stillll love em! But yea I'd appreciate a good reply thank you everyone for the help idk what I'd do without it kindasad.gif

2 Pages V   1 2 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: March 28th, 2024 - 9:13 PM