 Today I.......................................... |
  |
 Jul 6, 2013 - 9:20 PM
|
 
|
 Enthusiast  Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%)  |
QUOTE (richee3 @ Jul 6, 2013 - 4:31 PM)  QUOTE (ILoveMySilly97 @ Jul 3, 2013 - 8:18 PM) What!? They made one for the 1mz? Yes, here is the dual throttle body in my old RX 300.  The only benefit I can see is smoother airflow, considering its a single intake into two small throttle bodies and back into a single intake manifold. Actually, the 1mz-fe vvt-i out of the avalon has the dtb's which, I THINK, goes into one, then splits into two again in the intake manifold. I have to take off the tb again to see how it exactly works, but I know for a fact that there's two sections in the intake manifold. |
|
Jul 8, 2013 - 5:33 AM
|
|
 Enthusiast Joined Sep 23, '12 From Australia Currently Offline Reputation: 4 (100%) |
QUOTE (richee3 @ Jul 6, 2013 - 7:38 PM) QUOTE (Spider77 @ Jul 6, 2013 - 6:02 PM) The question is who dosent? Honda owners. They aren't people  XD --------------------  ------------------------------| White '94 Celica | Bought 11/05/12 | Sold 12/05/15 |------------------------------ |
|
Jul 8, 2013 - 6:56 AM
|
|
 Enthusiast Joined Mar 6, '12 From Brisbane, Australia Currently Offline Reputation: 6 (100%) |
Today I.... Officially cancelled my study plans for the UK and put through my application for San Jose State University in California
 I should know the outcome of the application by August, for a semester long exchange program in Electrical Engineering in the first half of next year
This post has been edited by JoshuaM: Jul 8, 2013 - 7:01 AM --------------------  SOLD :( 1997 ST204 Celica ZR -----> See it here on 6GC! 2013 October Celica of the Month XD Now: '00 NB8B Mazda MX5 -----> See it here in off topic! |
|
Jul 8, 2013 - 8:13 AM
|
|
|
Enthusiast Joined Sep 23, '12 From Australia Currently Offline Reputation: 4 (100%) |
Arrived in the neighbours mail... Again...
 Time to start the front end rejuvenation 
-------------------- ------------------------------| White '94 Celica | Bought 11/05/12 | Sold 12/05/15 |------------------------------ |
|
Jul 8, 2013 - 12:08 PM
|
|
|
Enthusiast Joined May 29, '09 From Gainesville, FL Currently Offline Reputation: 17 (100%) |
Am getting frustrated with the Celica.
Struts are new and fine, along with all the bumpers are new, springs are fine, new mounts, mount bearings, endlinks, ball joint, axles.... Still have thumps, thuds, clinks, and clanks. I can't put a high power engine, if I can't even get the this junk situated....tired of the money dump. |
|
Jul 8, 2013 - 12:34 PM
|
|
 Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
You sure its not just some old bushings making noise rav2n?
Or maybe the exhaust moving around some? -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235  n |
|
Jul 8, 2013 - 1:32 PM
|
|
|
Enthusiast Joined May 29, '09 From Gainesville, FL Currently Offline Reputation: 17 (100%) |
QUOTE (kurt95gt @ Jul 8, 2013 - 1:34 PM) You sure its not just some old bushings making noise rav2n? Or maybe the exhaust moving around some? It could be, I'm just so frustrated with it right now its pushing me to just selling the whole lot. |
|
Jul 8, 2013 - 1:50 PM
|
|
|
Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
QUOTE (rave2n @ Jul 8, 2013 - 2:32 PM) QUOTE (kurt95gt @ Jul 8, 2013 - 1:34 PM) You sure its not just some old bushings making noise rav2n? Or maybe the exhaust moving around some? It could be, I'm just so frustrated with it right now its pushing me to just selling the whole lot. Don't do that If you've already replaced that much go through check your bushings an recheck all of your bolts Never know something might have come back loose -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 n |
|
Jul 8, 2013 - 4:30 PM
|
|
 Enthusiast Joined Oct 25, '11 From Tbilisi Currently Offline Reputation: 3 (100%) |
Today I ordered Mcgard SplineDrive Blue Lug Nuts & Blue Forged Aluminum Rays Style Valve Stem Caps .
-------------------- |
|
Jul 8, 2013 - 6:35 PM
|
|
 Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
QUOTE (JoshuaM @ Jul 8, 2013 - 4:56 AM) Today I.... Officially cancelled my study plans for the UK and put through my application for San Jose State University in California I should know the outcome of the application by August, for a semester long exchange program in Electrical Engineering in the first half of next year That's cool! Maybe if you're in the area still while we have a future bay area meet. You'll get to see your car's twin(silly97). Haha. -------------------- |
|
Jul 8, 2013 - 7:11 PM
|
|
|
Enthusiast Joined May 29, '09 From Gainesville, FL Currently Offline Reputation: 17 (100%) |
QUOTE (kurt95gt @ Jul 8, 2013 - 2:50 PM) QUOTE (rave2n @ Jul 8, 2013 - 2:32 PM) QUOTE (kurt95gt @ Jul 8, 2013 - 1:34 PM) You sure its not just some old bushings making noise rav2n? Or maybe the exhaust moving around some? It could be, I'm just so frustrated with it right now its pushing me to just selling the whole lot. Don't do that If you've already replaced that much go through check your bushings an recheck all of your bolts Never know something might have come back loose True true, appreciate it. I just sucked it up and jacked the car back up. I didn't tighten down the caliper when I re greased the pads. Oops.Just finger tight Thankfully easy fix. Makes a scary noise. Now just this trans popping and good. Think I need to do the whole rods to. During swap time |
|
Jul 8, 2013 - 11:14 PM
|
|
|
Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
QUOTE (rave2n @ Jul 8, 2013 - 7:11 PM) QUOTE (kurt95gt @ Jul 8, 2013 - 2:50 PM) QUOTE (rave2n @ Jul 8, 2013 - 2:32 PM) QUOTE (kurt95gt @ Jul 8, 2013 - 1:34 PM) You sure its not just some old bushings making noise rav2n? Or maybe the exhaust moving around some? It could be, I'm just so frustrated with it right now its pushing me to just selling the whole lot. Don't do that If you've already replaced that much go through check your bushings an recheck all of your bolts Never know something might have come back loose True true, appreciate it. I just sucked it up and jacked the car back up. I didn't tighten down the caliper when I re greased the pads. Oops.Just finger tight Thankfully easy fix. Makes a scary noise. Now just this trans popping and good. Think I need to do the whole rods to. During swap time Well at least it was a easy fix an you found it before it done any damage -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 n |
|
Jul 9, 2013 - 6:08 AM
|
|
|
Enthusiast Joined Mar 6, '12 From Brisbane, Australia Currently Offline Reputation: 6 (100%) |
QUOTE (ILoveMySilly97 @ Jul 8, 2013 - 6:35 PM) QUOTE (JoshuaM @ Jul 8, 2013 - 4:56 AM) Today I.... Officially cancelled my study plans for the UK and put through my application for San Jose State University in California I should know the outcome of the application by August, for a semester long exchange program in Electrical Engineering in the first half of next year That's cool! Maybe if you're in the area still while we have a future bay area meet. You'll get to see your car's twin(silly97). Haha. Haha, definately But as we all know modding is a huge waste of money so I will be buying something and keeping it stock when I'm over there (And since I'm only going to have it for a few months a V8 sounds nice ), and you don't have st205's so it won't be a 6GC Thinking of that... gah, I'm going to need to learn to drive on the wrong side of the road In other news my eBay bargain JDM rain visors arrived this afternoon But I haven't been bothered to open the box yet -------------------- SOLD :( 1997 ST204 Celica ZR -----> See it here on 6GC! 2013 October Celica of the Month XD Now: '00 NB8B Mazda MX5 -----> See it here in off topic! |
|
Jul 9, 2013 - 2:36 PM
|
|
 Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
QUOTE (JoshuaM @ Jul 9, 2013 - 6:08 AM) Haha, definately But as we all know modding is a huge waste of money so I will be buying something and keeping it stock when I'm over there (And since I'm only going to have it for a few months a V8 sounds nice )EXACTLY.
-------------------- 2001 Miata LS 5-speed
|
|
Jul 9, 2013 - 4:28 PM
|
|
|
Enthusiast Joined May 29, '13 From New Zealand Currently Offline Reputation: 0 (0%) |
got a new aerial, gear knob, repainted the front bumper and sprayed my calippers
|
|
Jul 9, 2013 - 5:08 PM
|
|
 Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
today I purchased brake pads.
--------------------  *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Jul 10, 2013 - 12:56 AM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
I tightened the screw on the rear view mirror, kept flopping around. Not so much anymore. Also I learned you can rotate the mirror to where it's facing out the windshield. Guess what's getting flipped around the next time some dick with their HID's in reflector housings comes by?
-------------------- 2001 Miata LS 5-speed
|
|
Jul 10, 2013 - 3:29 AM
|
|
|
Enthusiast Joined Mar 6, '12 From Brisbane, Australia Currently Offline Reputation: 6 (100%) |
QUOTE (Box @ Jul 9, 2013 - 3:36 PM) QUOTE (JoshuaM @ Jul 9, 2013 - 6:08 AM) Haha, definately But as we all know modding is a huge waste of money so I will be buying something and keeping it stock when I'm over there (And since I'm only going to have it for a few months a V8 sounds nice )EXACTLY. D'oh It is only a waste if you aren't going to hang around long enough to enjoy it And today my wiring plugs for my projectors arrived, and I bought a fiberglass repair kit for the two tabs that snapped in postage
-------------------- SOLD :( 1997 ST204 Celica ZR -----> See it here on 6GC! 2013 October Celica of the Month XD Now: '00 NB8B Mazda MX5 -----> See it here in off topic! |
|
Jul 10, 2013 - 3:44 AM
|
|
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
QUOTE (Box @ Jul 9, 2013 - 10:56 PM) I tightened the screw on the rear view mirror, kept flopping around. Not so much anymore. Also I learned you can rotate the mirror to where it's facing out the windshield. Guess what's getting flipped around the next time some dick with their HID's in reflector housings comes by? I bought my celica with the rear view mirror flopping around like no tomorrow. Never checked how to tighten it but maybe I will tomorrow. Lol. -------------------- |
|
Jul 10, 2013 - 6:25 AM
|
|
|
Enthusiast Joined Sep 23, '12 From Australia Currently Offline Reputation: 4 (100%) |
QUOTE (JoshuaM @ Jul 10, 2013 - 3:29 AM) QUOTE (Box @ Jul 9, 2013 - 3:36 PM) QUOTE (JoshuaM @ Jul 9, 2013 - 6:08 AM) Haha, definately But as we all know modding is a huge waste of money so I will be buying something and keeping it stock when I'm over there (And since I'm only going to have it for a few months a V8 sounds nice )EXACTLY. D'oh It is only a waste if you aren't going to hang around long enough to enjoy it And today my wiring plugs for my projectors arrived, and I bought a fiberglass repair kit for the two tabs that snapped in postage I am epoxying mine, we can compare which method works better
-------------------- ------------------------------| White '94 Celica | Bought 11/05/12 | Sold 12/05/15 |------------------------------ |
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 8th, 2025 - 1:10 AM |