 Replacing rear bumper reinforcement |
 Jul 9, 2013 - 8:05 PM
|
 
|
|
Enthusiast  Joined Dec 29, '08 From midwest Currently Offline Reputation: 0 (0%)  |
I have a 95 GT liftback that is stored in winter. I was under the car the other day and noticed that the bottom part of the bumper reinforement, (specifically area right above exhaust tip), has developed a lot of rust, and bolt holding bumper cover is corroded so it is going to be rough to get it out. I want to get it off and install a new rear bumper reinforcement piece. It looks pretty straight forward, but have never done it before. Any advice would be great. Thanks
|
Posts in this topic
6thcelestial Replacing rear bumper reinforcement Jul 9, 2013 - 8:05 PM
micronian I'm about to do the same thing to my car, I ju... Jul 11, 2013 - 1:12 AM
6thcelestial QUOTE (micronian @ Jul 11, 2013 - 2... Jul 11, 2013 - 12:44 PM
6thcelestial QUOTE (micronian @ Jul 11, 2013 - 2... Jul 13, 2013 - 2:08 PM micronian QUOTE (6thcelestial @ Jul 13, 2013 - 2... Jul 14, 2013 - 5:30 AM playr158 The bolts are inside the car in the rails on the t... Jul 11, 2013 - 1:05 PM 6thcelestial QUOTE (playr158 @ Jul 11, 2013 - 1:0... Jul 11, 2013 - 4:46 PM 6thcelestial QUOTE (playr158 @ Jul 11, 2013 - 2:0... Jul 12, 2013 - 11:26 AM micronian Finally, I got to replace the rear reinforcement b... Jul 23, 2013 - 9:58 PM 6thcelestial Wow, thanks Micronian for taking the time to list ... Jul 24, 2013 - 12:41 PM 6thcelestial Started working on removing the bumper yesterday, ... Aug 11, 2013 - 1:54 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 2:01 PM |