 drivers side cv snap ring, getting lost here |
  |
 Sep 8, 2013 - 3:00 PM
|
 
|
|
Enthusiast Joined Sep 8, '13 Currently Offline Reputation: 0 (0%)  |
Sorry if I'm starting a repeat here, but im finishing up my clutch install and im running into problems, I'm not sure if my snap ring is a little broken , or if thats how it is supposed to look, also, my flange seal thing, not sure what the spring circle is or where it goes, and should i replace the seal in it? also am i missing anything other than the bolts in these pictures? just for the cv to be happy in the diff, that is, thanks in advance to anyone who helps, ill be sure to pay it forward
 also, this is 5sfe if that helps at all 
This post has been edited by dano5478: Sep 8, 2013 - 3:25 PM |
|
Sep 8, 2013 - 10:22 PM
|
|
|
Enthusiast  Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
in the top pic, that is a spring for the axle seal, its toast, it needs to be replaced.
in the bottom pic, that is the c-clip on the axle, it looks ok to me, you need to pop the axle back in. -------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Sep 9, 2013 - 9:46 AM
|
|
|
Enthusiast Joined Aug 31, '13 From Wyoming Currently Offline Reputation: 0 (0%) |
\
This post has been edited by Roadrash: Sep 11, 2013 - 12:37 AM |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 25th, 2025 - 6:22 PM |