![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
after a long (in my eyes) hiatus from June 2012, finally back on the road
![]() So here is the story of my celica. so i dont get to ramble on too much, lets start out with the first picture i took of my car back in 2006 when I got her. ![]() the first mod that i did was my JL speakers all around. nothing special. i wasnt too much into the whole 6gc scene until a little bit after. i then stripped the hub caps and started putting every sticker i found on that car! ![]() ![]() ![]() ![]() then i had finally gotten into the 6gc scene and started to mod her. first things first, a $70 weapon r intake from a fellow member. needless to say i felt badass installing it seeing as how it was my first mod. http://www.youtube.com/watch?v=WdQKHBZH2yg...re=channel_page ![]() after that came exhaust, a nice n\' rare SP1 ![]() ![]() THEN TRAGEDY STRUCK! i had thrown a rod and my car was up for about 3months, saddest moment ever! ![]() after all was said and done, i got a new rebuilt block. ![]() the day it was back on the road ![]() this is the first pic i took with my new camera ![]() Then after not having it for a while i wanted to get her gifts, thus leading us into the... BAD IDEA PHASE ![]() ![]() ![]() end phase ![]() then i put on my XS auto headers the NIGHT before i was leaving for my freshman year of college. ended up rushing and cutting to hastily and had a bad exhaust leak. and a lil bit after put heat wrap on the rad tubes ![]() also i got one of the limited DCR 3points ![]() ![]() then after a month or so, my engine quit on me while cruising around pittsburgh. had to tow it back home to the shop the block was built at in philly. ended up being a bad head gasket. ![]() then i just started buying stuff while at school and putting it in SPENDING PHASE installing hid\'s in february ![]() ![]() ![]() most up to date interior shot at night ![]() ![]() most up to date engine shot ![]() Got some bars ![]() STEELIES PAINTED ![]() yellow jdm fogs ![]() jdm tails ![]() yellow highs ![]() MATURING PHASE well i took off all the stickers haha ![]() got new rubbers ![]() a big shipment ![]() auto-x came into my life http://www.youtube.com/watch?v=s66yhF5jtVk ![]() ![]() ![]() ![]() then she sat for a while, not being modded, she was content ![]() THE SCREW YOU GUYS MY CAR IS FINALLY LOWERED PHASE this is how she sits as of now ![]() ![]() ![]() props to art for getting me into this scene ![]() the end.....? This post has been edited by Tigawoods: Aug 15, 2015 - 5:34 AM -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) ![]() |
cant remember if you have a roll cage, where did u get it.
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
I dont. Just a crap load of bars make it look that way.
later on I will put in a cage and sell off all the bars -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) ![]() |
bars? lol.
I would love to take my celi to the track, for HPDE, but they wont allow it. No bars. its a convertible. Im thinking of doing a temporary roll bar, removable. -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
bars? lol. I would love to take my celi to the track, for HPDE, but they wont allow it. No bars. its a convertible. Im thinking of doing a temporary roll bar, removable. rear strut/harness/floor bar make it look all fancy haha. Yeah for a vert just Fab up a removable roll bar. Im not sure of the best design or where the mounting points would be -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
knocked out the battery relocation on Saturday. It was literally an 8am to 5pm job haha
Started the car this afternoon and it cranks over faster than the stock location! I picked up a hydraulic crimper and BOY is that thing handy ![]() ![]() ![]() finished off with some glue lined heatshrink ![]() master cut off ![]() since I dont have any important things going on behind the front seats I didnt find it necessary to tuck the cable much ![]() I quickly came to the realization that quick solder terminals are THE WORST ![]() cool wires I got to use ![]() next weekend is going to be spent making a small relay panel that I will mount in the glovebox....and after that...racepak ![]() This post has been edited by Tigawoods: Mar 14, 2016 - 10:35 AM -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) ![]() |
Nice install, is the master cut off just to save the battery when not in use?
-------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
![]() Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
Thanks! Yeah, that and a small slice of safety on the track and some security at home when its parked.
-------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
Very cool. But that opposition to flow though. Is that gauge of wire thinner than standard thickness? That way you can gets all your necessary power to components?
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
Very cool. But that opposition to flow though. Is that gauge of wire thinner than standard thickness? That way you can gets all your necessary power to components? I dont follow? Its 1AWG and standard is 8AWG to the Starter and I think 4AWG to the Alternator. It seemed like plenty to power the accessories but I have the majority of them unhooked at the moment. I am going to check everything under a more full amp draw this weekend and see how it handles it. This post has been edited by Tigawoods: Mar 14, 2016 - 1:32 PM -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Nov 30, '04 From Atlantic City Currently Offline Reputation: 21 (100%) ![]() |
knocked out the battery relocation on Saturday. It was literally an 8am to 5pm job haha Started the car this afternoon and it cranks over faster than the stock location! I picked up a hydraulic crimper and BOY is that thing handy ![]() ![]() ![]() finished off with some glue lined heatshrink ![]() master cut off ![]() since I dont have any important things going on behind the front seats I didnt find it necessary to tuck the cable much ![]() I quickly came to the realization that quick solder terminals are THE WORST ![]() cool wires I got to use ![]() next weekend is going to be spent making a small relay panel that I will mount in the glovebox....and after that...racepak ![]() ![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
![]() Hey! Sick battery caddy! Did you design it and have it fabbed somewhere? Very cool ![]() -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
![]() if you get the materials I would DEF do it. I love wiring. Hey! Sick battery caddy! Did you design it and have it fabbed somewhere? Very cool ![]() NOPE. Bought that shiz. I could have definitely made it had I the time and resources haha -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
got in a few packages thatll help me finish off the relay panel
![]() here is the diagram for how it will be wired up. Should work yeah? ![]() This post has been edited by Tigawoods: Mar 16, 2016 - 7:14 PM -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
What are those boxes with the dashes in them? Accessory input. And switches with connection from each side. Trying to understand, but confused
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
Relays, I am only using two at the moment and the horn is wired at the relay a bit differently than what is pictured
This powers and grounds the majority of my aftermarket electronics now, NO more birds nests in the footwell!! I didnt have the right thickness plastic sheeting so since it was going to be hidden I jsut stacked 2 sheets and riveted it around the perimeter, its wavy but it holds ![]() I solder all my terminal connections, I hate these things and they never hold when I crimp them ![]() also got my tires removed from the RE's. Going to weigh them individually, i think those Falkens weigh ALOT ![]() ![]() This post has been edited by Tigawoods: Mar 21, 2016 - 12:56 PM -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) ![]() |
Nooooooo..... Falkens!!!!!!!! Ehat a waste
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 17, '10 From U.P. michigan GO STATE Currently Offline Reputation: 3 (100%) ![]() |
Usually a higher performance tire will weigh more with reinforcement in the side walls. The Falkens I had although 18s weighed in around 3lbs heavier per tire with the same width as the new rivals. I will say those Falkens look properly fast without even moving haha!
This post has been edited by 4-eyed-freek: Mar 20, 2016 - 10:53 AM -------------------- It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road.
![]() Celica: The name is derived from the Spanish word for "heavenly" or "celestial". Back-2-Back July COTM 15&16 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
Nooooooo..... Falkens!!!!!!!! Ehat a waste Ill be putting them back on. A couple of them were a pain to get off. My buddy was saying to just ditch them and grab some R888's. But I dont waste the money if there is still a summers tread on the Falkens left Usually a higher performance tire will weigh more with reinforcement in the side walls. The Falkens I had although 18s weighed in around 3lbs heavier per tire with the same width as the new rivals. I will say those Falkens look properly fast without even moving haha! Yeah but (we didnt test it first hand) when we took the tires off they just felt much heavier than some of the other brands of around the same size. I dont recall my RE71Rs weighing that much (they are 20mm thinner width though) Oh well, anyways everything is ready to go, just sitting....waiting for the Racepak to ship out to me. Thats the last thing I have to do, with the hardest part of the the install being how to mount it. Hopefully it will only take me a weekend Wheels will be painted probably the first week of April. All battery and electronic work is finished. Here is a shot of everything now in the original battery location ![]() -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) ![]() |
started to figure out the wiring for the Racepak along with beginning to fashion the mount and surround for the unit
The LEDs on the side will be for the CEL, Open Door, Fuel Light and a spare ![]() mounted the gramlights to pull the car out, the 5x114.3 to 5x100 adapters fit well! ![]() ![]() still have a great bead after 7 months without a wash! ![]() weighed the RE30's bare on my parents old timey medical scale ![]() -------------------- ![]() 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) ![]() |
you have inspired me to use my celica for stuff i never imagined.
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
![]() ![]() |
Lo-Fi Version | Time is now: June 24th, 2025 - 7:12 PM |