 Help...trd quickshifter install, not shifting properly |
 Mar 31, 2004 - 12:55 AM
|
 
|
|
Enthusiast  Joined Jul 8, '03 From Dallas, TX Currently Offline Reputation: 0 (0%)  |
Hi All,
Im having a problem with the instal of a TRD Quickshifter i purchased recently. I did all the steps as mentioned in coomers HowTo article. However, when i put in the quickshifter i cannot shift to the 1st 3rd and 5th gears...i noticed that the shift linkage cable(one with a ball at the end) loosley at the end where the metal pieces hold the cable to the shifter frame... The shifter box says that it is for models 94-97 and my car is a 99..does it make a difference.. Also, i noticed that there were rubber spacers(bushes) on my old shifter and i replaced them with the metal ones for the quickshifter... Can anybody help me as what ig wrong. Thanks, Preetham. |
Posts in this topic
kingpreetham Help...trd quickshifter install Mar 31, 2004 - 12:55 AM
kingpreetham I also noticed that the rear tip(the tip with the ... Mar 31, 2004 - 1:11 AM kingpreetham Now, the shift linkage cable(one with a ball at th... Mar 31, 2004 - 2:49 AM blkGT try turning the spacers over. i put my white space... Mar 31, 2004 - 8:37 AM
kingpreetham thanks, fixed it....the mistake i made was not pla... Mar 31, 2004 - 9:52 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 15th, 2025 - 11:10 AM |