6G Celicas Forums

nice i can wait to see it at night

if you can post it, Save your scaned file as a zip, and try and host it somewhere, then post the file to download.. Thanks, and looks realy nice..

OK I think I figured out how to post these suckers, I put them in my yahoo briefcase. Here you go I hope this works for ya (side note! the 2 side pieces scanned really dark...you may not wanna use them, I didnt!):

Scanned gauge images

thanx, looks great.

why is it not working any more.. humm.. maybe to much bandwidth or somthin

nvm it's working for me now.

This post has been edited by WannabeGT4: Sep 20, 2004 - 9:24 PM

hey that looks awesome, lots of potential here to create a unique look, why didn't
someone on 6gc come up with this idea before

I went ahead and hosted the images here on the server for everyone to access.

Round Gauges

Triangle-ish Sides

How easy is it to remove the needles off the guages, just asking as the last
person to try this on my speedo wrecked the speedo. Can't use the posted template as the GT4 layout is different..


Jon

It took me a while but I finally got mine removed (wasnt as hard as I thought!) I was scared that the needles wouldnt read right when I put them back on, but they seem to be working just fine!

Sorry bout that dumbass question, I didn't bother to read through all the posts

do you have a night pic?
im curious how the light gets through those, and if you make the triangles...how are you supposed to do that.

I have a night time pic now, but the camera didnt really do it any justice. But I'll post it anyway Just keep in mind the picture looks way better in person!! Depending on your monitor, the picture may look really dark in some areas & light in others. Yet in person it all lights up just fine....go figure!

As for the triangle pieces, sorry they arent together w/ the 3 main gauges. I would have scanned them all together but the scanner was not large enough to do that.

This is toooooooo nice!

I am doing the same thing with my plastics around my radio and all. Just have to get colors right.

J-

it looks really nice, but I think that would be way to much to look at when you just need to know you speed an such...

You think there would be a way to make white face gauges??

that is so nice is there some other pictures we can get that would look great to do this to?

This post has been edited by trdevelopment: Sep 26, 2004 - 1:56 PM

ya of course!

and why didnt u use the girl pose???

i would use it but since i dont have photoshop or anythign like that i can print it right now or i would use it

This post has been edited by Exile04: Sep 27, 2004 - 12:04 AM

WOOOHHAAA, my car on someones gauges ) Nice

There are few thing then dealing with cluster, if you guys dont wanna F. it up just ask

Actually removing the needles is the main head ake. Cuz if you just pull them, insted of relising them from the stoper, and just put them on (avoiding the spring tension) your needles will read way to high...

im trying to write a how to on this, or maybe i will just post here, that everyone could read and learn


well, here it goes HOW TO REMOVE NEEDLES CORECTLY!!!:


1. STEP *removing the KMH or MPH gauge needle.
first of all you need to release needle from the small bar what stops it. (nuber 1 in the 1 step pic). It is first easy step, you need just to lift easily the end of the needle and take it over that bar. Then you took the needle over this bar, release it so it will eventualy turn back and it will toucht the second bar(numer 2 in the 1 step pic) (the bigger one with witch you drop the miles or km to zero ). Now to avoid this bar it is kinda hard but it can be done. Same proces as before, you lift the end of the needle as much as you can (do this easy, very easy, and try to feel how much more the needle could handle), and with other hand try to lean the bar to your side as much as you can and at the same time try to take the needle over this bar. It is kinda sceary procces, but i'v done like 6 gauges before, and none of them there broken and all of the there showing same KM/h after reasembling. After you jumped through these bars, release the needle and watch how much it will turn more to the right. I would recoment to put the gauge in horizontal position and let the needle slow dowl compleatly till it stops. Then take some marker pen or somthing and MARK the place (number 3 in step 2 picture) there the end of the needle stoped.

Well, to put the needles back it is the same process only backwards

The RPM gauge is easyer, cuz there is no second bar

And the TEMP and FUEL gauges are easy too, you just need to mark the place there the needle are in OFF position (i personaly mark this place with some small sharp thing (the metal needle will do the job).

and whats it i think about the cluster, work safe, and dont blame me if you brake somthing, this is just the friendly advice NOT A COMPLEATE DIRECTIONS.

This post has been edited by doGGy: Sep 27, 2004 - 7:59 AM

I actually do have the girl in my car now, I put her in yesterday. It looks good too just ask acenova!! I also scanned my friends gauges from his Mustang. He saw my gauges & just had to have one of his own lol