6G Celicas Forums

I know there have been lots of questions about this... BUT... just in case some of the c-one/zyclone front bumper owners out there haven't replied to any of the threads...

Has ANYONE tried to fit the GT-4 stock impact/reinforcement bar behind the C-ONE/Zyclone front bumper?

-Does the thicker non-gt-4 bar fit behind a GENUINE C-ONE ST-204 front bumper? or does that need modification too?
-Does the gt-4 bar fit behind the GENUINE C-ONE ST-204 front bumper?
-Does the gt-4 bar fit behind the GENUINE C-ONE ST-205 front bumper?

My body guy won't remove/modify the bar and I REALLY need to know this before I shell out any more money for this.

Thanks.

Has ANYONE tried to fit the GT-4 stock impact/reinforcement bar behind the C-ONE/Zyclone front bumper?
YES

-Does the thicker non-gt-4 bar fit behind a GENUINE C-ONE ST-204 front bumper? or does that need modification too?
Needs modificaton

-Does the gt-4 bar fit behind the GENUINE C-ONE ST-204 front bumper?
yes

-Does the gt-4 bar fit behind the GENUINE C-ONE ST-205 front bumper?
yes

thanks. guess i'll be getting a gt-4 impact bar now

Do you know how much do hey cost?

abotu 110usd for the bar and abotu $70usd for each of the frame bracket thnigs

oook so if i buy the "knock out or knock off" version of the body kit, it would fit OK if i install that impact bar, would that be OK?
cuz the gt-four body kit imported is pretty expensive,


70 for the frame bracket. wowow how many do you need?

well.. that's what people are saying.. so it should be fine...

1 left and 1 rite bracket...

but is it hard to take off the original crash bar?

Sorry if im askin too much, its because i really want to change the look of my gt to a gt-four kind of,
And i don't want to messed it up.

Also i found this on ebay, but i really don't trust it a lot,
can someone tell me if its a good idea to buy it?
C-one
By the way, the only part that is from the c one body kit is te front bumper, isn't it?
or if soemone know where to get it from please tell me,

I also foud this but they called it C-5 front Bumper
C-ONE or C-5

don't know if this helps but you can go get a small bar of steel.and make it fit yourself. i have a after market crash bar custom made of steel. and my front bumper went on with out a problem.

well.. unless u get the genuine kit from c-one japan... they are all replicas... some are replicas of replicas of replicas etcetcetc... difference is fitment... i'm sure genuine c-one will fit the best... mine is from vis... vis zyclone... got it from a member here called boosted6g

i would assume the bar is just held on with a few bolts or something so shouldn't be too hard to replace

its held on by 4 bolts.. and comes right off.

What i did was sand the bumper and it fits just fine