 7AFE oil burner |
 Nov 29, 2006 - 8:22 AM
|
 
|
 Enthusiast  Joined Nov 29, '06 From Newnan, Ga. Currently Offline Reputation: 3 (100%)  |
I've got a '94 S/T that loves to consume oil (1.5qt per tank). 147K on the speedo. It smokes upon start up and slightly when driving, I suspect valve stem seals. PCV valve is good. Ran a compression check and each cylinder was over 210psi. Plugs look good with a slight tan deposit on them. Anybody had a similar problem and found a fix? Not sure if should rering it or just do the stem seals. Don't have a leakdown tester to see what that shows. What ya think?
|
Posts in this topic
56willysnut 7AFE oil burner Nov 29, 2006 - 8:22 AM
rayneezy23 my car does that too piston rings might have to be... Dec 7, 2006 - 11:54 PM Bitter sounds like real bad valve stem seals. high rpm d... Dec 8, 2006 - 12:18 AM gnetik do you have white or bluish black smoke when you s... Dec 11, 2006 - 12:43 AM rayneezy23 what do you in that case is that the only way repl... Dec 11, 2006 - 1:33 AM
56willysnut Going after the stem seals first. Dec 15, 2006 - 4:41 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: May 25th, 2025 - 8:29 PM |