 20v head swap, need a parts list |
 Feb 15, 2007 - 10:54 AM
|
 
|
 Enthusiast  Joined Jan 9, '05 From green springs ohio Currently Offline Reputation: 1 (100%)  |
ok after doing some research i have decided to swap a 20v on my 7a , so right now i am puttting together a parts list of what is needed and i hope you guys can help me out, 1. a 20v head i want a full head with the intake and all the sensors ,right. 2. i will use a set of 4age pistons for the 20v head ,also they will be a lower compression. 3. the rods i want to know if a set of 4age rods will work or do i need a costom set? 4. what timming belt do i use ,i heard a 944 belt works but i dont know. 5. how do i wire it up and can i use a piggyback unit like emanage or do i have to go stand alone, i will be running a turbo on this setup but i am not out to make huge hp , so any help would be great ,thanks again guys
This post has been edited by trd94: Feb 15, 2007 - 10:55 AM --------------------  |
Posts in this topic
trd94 20v head swap Feb 15, 2007 - 10:54 AM
Kwanza26 QUOTE(trd94 @ Feb 15, 2007 - 3:54 PM... Feb 15, 2007 - 4:08 PM
trd94 QUOTE(Kwanza26 @ Feb 15, 2007 - 4:08... Feb 15, 2007 - 7:59 PM frotou For the timming belt with 7a+20v head I think guys... Feb 19, 2007 - 6:55 PM trd94 QUOTE(frotou @ Feb 19, 2007 - 6:55 P... Feb 20, 2007 - 5:07 PM normality78 how about distributor? The last research that i... Mar 1, 2007 - 12:41 PM Toynado QUOTE(normality78 @ Mar 1, 2007 - 12... Mar 7, 2007 - 8:59 AM normality78 whahaha, " i used a stand alone ecu" exp... Mar 7, 2007 - 9:56 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 14th, 2025 - 4:42 PM |