 How to build a patch that will last :) |
 Mar 18, 2008 - 1:06 PM
|
 
|
 Enthusiast  Joined Jan 31, '08 From Canada Currently Offline Reputation: 0 (0%)  |
In this case the hole is in the floor 3 layers deep, including a re-inforcement piece for the rocker!
Alright before you start cutting out and getting ready for a patch you have to make sure you have the right tools for job as well as equipment! A welder , welding gloves, shield/blanket & helmet, fire extinguisher (in case you light something on fire ), safety glasses, clamps, pencil & paper to write down your measurements(or in my case paper towel), sheet metal (20 & 16 gauge), side cutters, grinder, non-latex gloves, pick hammer, light (if needed), tin snips, epoxy primer, sealer, die grinder, measuring tape, tape, dolly or anvil, and whatever else you may think you'll need.       This post has been edited by speedfeen: Mar 18, 2008 - 1:15 PM --------------------  FEEN |
Posts in this topic
speedfeen How to build a patch that will last :) Mar 18, 2008 - 1:06 PM
speedfeen First things first. If you are going to have an ac... Mar 18, 2008 - 1:16 PM playr158 nice job
I'm doing about the same process on... Mar 18, 2008 - 1:17 PM D-Man Good job. Mar 18, 2008 - 2:14 PM speedfeen thank you
feen Mar 18, 2008 - 2:30 PM
D-Man QUOTE(speedfeen @ Mar 18, 2008 - 3:3... Mar 18, 2008 - 2:59 PM presure2 great work.
i would really like to see some work o... Mar 18, 2008 - 5:47 PM speedfeen QUOTE(presure2 @ Mar 18, 2008 - 5:47... Mar 19, 2008 - 10:25 AM speedfeen BODY WORK
there you go presure2 and everyone e... Mar 19, 2008 - 3:17 PM D-Man Reminds me of my first cougar.... Infact they have... Mar 19, 2008 - 3:20 PM 6strngs how about a right up on shaving emblem holes or re... Mar 19, 2008 - 3:54 PM speedfeen i wont have many pics BUT
i will write one up tom... Mar 19, 2008 - 9:07 PM speedfeen QUOTE(6strngs @ Mar 19, 2008 - 3:54 ... Mar 20, 2008 - 10:57 AM 6strngs anyway to do emblem holes other than welding? Mar 20, 2008 - 3:29 PM speedfeen not the right way....mickey mouse??? sure but im a... Mar 20, 2008 - 3:57 PM 6strngs I'm not sure what you mean by mickey mouse. bu... Mar 20, 2008 - 4:18 PM speedfeen then dont do it yourself....
MICKEY MOUSE...is... Mar 20, 2008 - 6:31 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 16th, 2025 - 1:27 PM |