Mar 8, 2010 - 11:38 PM
|
|
|
Enthusiast Joined Mar 8, '10 From philippines Currently Offline Reputation: 0 (0%) |
Helo guys im new to this site, im from the philippines and just got a 3sge 3rd gen for my st 171, was planing of upgrading the engine while its still out of the car, was thingking of puting itbs from a black top 4age and changing the values and springs from a beams which are allitle bit bigger or from a gte im still sourcing for the specs of other ge or gte and if they can be swap with minor machining, then go adjustable cam gears and cams with better lift, its kinda hard and expensive to look for 3sge parts here so im looking at the options from other gen that can be an upgrade for the 3rd gen, any sudgestions will be most appriciated. Thanks
|
millow 3sge 3rd gen inquiries Mar 8, 2010 - 11:38 PM
pasqual I did upgrade of 3 rev3 engines
-cams 278deg ... Mar 9, 2010 - 12:01 AM
millow thanks for the reply sir pasqual, is it safe to do... Mar 9, 2010 - 12:08 AM
pasqual -re-griding is safe , I did it on my beams too ... Mar 9, 2010 - 1:05 AM
Rusty wow thats some nice compression numbers there.
I a... Mar 9, 2010 - 2:04 AM
millow hello guys i dont know if this is a dum question, ... Mar 9, 2010 - 11:01 PM
Rusty dont think so on the cams since the gen 3 has the ... Mar 10, 2010 - 1:56 AM
pasqual stock rev3 springs are good for 11.3mm lift , Mar 10, 2010 - 2:23 AM
Rusty they are? I read that they become coilbound at 10.... Mar 10, 2010 - 11:42 AM
pasqual manual saying that Intake cam lift is 9.8mm corre... Mar 10, 2010 - 12:10 PM
millow thanks guys, so stock springs are ok, just dont be... Mar 11, 2010 - 1:51 AM
pasqual QUOTE (millow @ Mar 11, 2010 - 2:51 ... Mar 11, 2010 - 3:00 AM
millow thanks for the offer sir pasqual, i will seriuousl... Mar 11, 2010 - 4:06 AM
Rusty ^ try kelford cams here in NZ, they can do you cus... Mar 11, 2010 - 9:52 PM
pasqual QUOTE (Rusty @ Mar 11, 2010 - 10:52 ... Mar 14, 2010 - 8:47 AM
millow looks like very good idea
http://www.camshaftsh... Mar 19, 2010 - 4:16 AM
Rusty I dont know, thats some major duration, its very h... Mar 19, 2010 - 3:29 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 15th, 2025 - 11:14 AM |