 Engine knocking?, high def video w/ audio enclosed |
  |
 Mar 27, 2010 - 10:48 AM
|
 
|
 Enthusiast  Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%)  |
okay so i've been outta town for the last week and a half; and the car has been sitting at my shop. when i got back into town yesterday, went to fire her up and head home, she instantly starting making this horriffic "rock stuck in a blender" noise. when i poped the hood i found the number 1 cylinder smoking it's ass off. (like me when i'm drunk
 )this started from key in ignition so i know it's not premature detonation; the engine wasn't hot enough. Sounds like a rod pinging arround maybe? come loose? also, this morning when i started it up; the smoke wasn't pouring outta the #1 cylinder like it was yesterday. I checked the plug wires for oil, but to no avail. i've got alot of oil on the top of the engine, but not in any of the spark chambers. before i goto the dismantlement, i'd like a few second opinions; so i got lil'bit to fire it up while i ran the recorder. hope this helps. http://www.youtube.com/watch?v=-PAX4OoDyiE sugestions? opinions? This post has been edited by D-Man: Mar 27, 2010 - 10:51 AM -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM)  Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
|
Mar 27, 2010 - 1:58 PM
|
|
|
Enthusiast Joined Oct 24, '09 From Appleton, Wisconsin 54915 Currently Offline Reputation: 7 (100%) |
Personally i would take off the valve cover and start there. When i had that problem about 3 yrs ago with my other car i just drove it till it broke and then dropped another motor in it. but then again that cost me a new motor, if its an issue you can fix i would take it apart and see whats knocking. It could be a piston hitting a valve, a connector rod thats either broken or loose, you could have something in one of your cylinders. Thats my guess, with my old car it was a connector rod that went through the oil pan and made 2 holes in the pan and 2 in the block itself. it wasnt pretty. If your #1 cylinder is smoking and knocking i would guess its valves are the culprit. Let me know if this helps.
|
|
Mar 27, 2010 - 5:38 PM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
rod knock.
steff says 30 miles. could be more, could be less, but that is without a doubt bad news. that dont sound good at all. if you plan on rebuilding the motor, i would run that motor as little as possible. sorry, dude. 
-------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Mar 27, 2010 - 9:54 PM
|
|
|
Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
thanks cyber, thanks Manny.
i was hoping that it wasn't as bad as i though. (like a lil' kid hearing that santa isn't real; i knew it- but i didn't wanna believe )well thanks to havoc, i've already sourced a new motor. thanks guys  or maybe i should just loot up the extra and do something a bit more dramatic? lol. we'll see what my finances will allow right now. -------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM) Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
|
Mar 27, 2010 - 10:01 PM
|
|
 Enthusiast Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%) |
hmmmm doesn't sound like a rod knock to me at all... sounds like the beginning of a 3sgte swap.
 Sorry about your rod knock though seriously. Good luck with whatever way you're going though buddy.
-------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
|
Mar 27, 2010 - 11:19 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
Rod Knock
whos there d D who, d d who d man who made the engine knock.!! 3SGTE FOR MOAR POWER OR BEAMS FOR AWESOME COOLNESS. -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Mar 28, 2010 - 1:52 AM
|
|
|
Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
QUOTE (njccmd2002 @ Mar 27, 2010 - 11:19 PM) Rod Knock whos there d D who, d d who d man who made the engine knock.!! 3SGTE FOR MOAR POWER OR BEAMS FOR AWESOME COOLNESS. 
-------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! QUOTE (DEATH @ Nov 11, 2008 - 5:40 PM) Damn D-Man - most impressive. QUOTE (99GT @ Nov 14, 2008 - 4:04 PM) D-Man's post should be a sticky QUOTE (samir0189 @ Nov 4, 2008 - 10:50 AM) LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 23rd, 2025 - 10:47 AM |