6G Celicas Forums

turns out the flywheel bolts were loose. bad, very bad & sloppy.

torque wrenches should be every n00b's best friend, and a helper, too.

all good now. just got to get my exhaust welded.

yup..its like what 76ftlbs or somthing, isnt it?
make sure you use locktite too!!
with all the bolts i've had work loose on me over the years, i pretty much use it on everything now. lol

Hahaa come on newbie. Always torque and loctite ur bolts!



Glad it was something simple.

loctite blue smells like blueberry candy.



getting to the bolts wasn't simple. but it could've been worse.

dyno day at p-tuning in manassas, va.

http://forums.nasioc.com/forums/showthread.php?t=2200041

they were talking about a 12% loss, running really rich. there should be a video with all the runs.

how many pounds were you running?

Boost gauge reads arouns 13-14

so if it wasnt running rich it prob wouldve made more power right? i couldnt find the video to hear it run. im jw bc im tryin to get a feel for what im pushin for power right now, im at around 13psi too, jw where im standing lol

the guy said that if they tuned it, they could get a lot more power out of it.

the runs were recorded all the that day. i'll post back with the link.

This post has been edited by purplegt4: Aug 15, 2011 - 8:10 AM

was that to the wheels ?

at 14 psi on an st205 I think the power rating was flywheel ...why didnt u up it to 17 psi?

That's actual whp

no boost controller fitted.

My transmission was hungry and wanted to eat my axle.






So any suggestions?

From the other side I can't really fit anything through the hole because there's a thin bar in the way

I'm wondering:

• If this transmission really has LSD afterall.
• If pieces of the axle could fall into the transmission.

I guess the only way to know is to take it apart.

you could always try a huge extractor bit, but probably just need to take apart the transmission.
that sucks dude

Same thing happened to me, drivers side? I replaced my tranny in case there was metal pieces inside. I never took the old one apart but there was shavings all in the axel hole.. I'll take it apart one of these days lol

This post has been edited by Ted95: Feb 21, 2012 - 3:52 PM

Yes driver's side. Ok so I'm looking at replacing the transmission. Thanks!

I'm sorry man! Seems like you can't catch a break!

LOL Pun intended?

She was fine for a while. I just have to learn to gradually step on the gas instead of punch it!

You guys are freaking me out. I really don't want to snap an axle off in my tranny!