![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
Hey guys.
Just installed new LED's in the cluster, and now my High Beam, Doors Open, Brake indicators in the dash aren't working :S Everything else is fine, LED's working, Speedo works etc. Not too sure what fuse it could be if the rest are working... any other ideas? Thanks. This post has been edited by Timmyface: May 12, 2011 - 11:06 PM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
Bump. Anyone?
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) ![]() |
reverse the LED's because they won't work if you have them in the wrong way
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
reverse the LED's because they won't work if you have them in the wrong way He didn't say that the LEDs didn't work, and even so, that shouldn't hamper the other functions. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
Yeah, LED's are working fine, everything else possibly electrical wise is.. besides the little indicator lights in the dash for the doors etc
![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) ![]() |
did you put LED's in those indicators or are they still the stock bulbs?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
Still the stock bulbs, and they dont look like they have blown
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) ![]() |
make sure the 3 harnesses are plugged in behind the cluster. One is probably not pushed in tight enough.
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
All plugged in firm and tight. Has me stumped.
-------------------- |
![]() |
|
Enthusiast ![]() ![]() Joined Dec 14, '10 From Lansing MI Currently Offline Reputation: 1 (100%) ![]() |
make sure u didnt tear your instrument panel i did that to my old cluster
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) ![]() |
I sorted it out >< The backing of my new gauges were covering the holes basically, so i trimmed the back layer and its all good now
![]() Thanks though guys, just another silly situation by me. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: June 21st, 2025 - 3:07 PM |