Jul 16, 2011 - 10:28 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Aug 12, '07 From Lancaster, Pa Currently Offline Reputation: 35 (100%) |
first off sorry if this is a repost. i put my 2nd 3sgte back together tonight. went to start it and found that it doesn't hold an idle. if i give it gas every thing is fine, but when i let off the pedal idle falls and eventually the car dies.
eliminated the neutral safety switch as well as boost/vacuum leaks as being the problem. not a fuel issue, or battery concern either! i have two or three grounds in the engine bay. wanna say it's the air flow sensor. any suggestions, or advice is appreciated! This post has been edited by garin: Jul 24, 2011 - 10:26 PM -------------------- |
garin 2nd gen 3sgte problem thread... Jul 16, 2011 - 10:28 PM
Smaay could the the MAF or the idle air control valve Jul 17, 2011 - 12:35 AM
garin i was thinkin along those lines. Jul 17, 2011 - 10:24 AM
presure2 Is your mechanical timing set properly? Jul 17, 2011 - 9:26 AM
garin ok so i got a different afm on the car. seemed to ... Jul 18, 2011 - 12:04 AM
lagos QUOTE (garin @ Jul 18, 2011 - 1:04 A... Jul 18, 2011 - 10:10 AM
lagos ... and as for those sensors, you can just unplug ... Jul 18, 2011 - 12:35 PM
Stambo Mine does the same thing, my iac isn't doing a... Jul 19, 2011 - 7:44 PM
lagos QUOTE (Stambo @ Jul 19, 2011 - 8:44 ... Jul 19, 2011 - 11:48 PM
Stambo well i mean cost price w/e. Just went to the next ... Jul 21, 2011 - 12:22 AM
garin oh yes thanks for the update lagos! it was boo... Jul 24, 2011 - 5:03 PM
presure2 QUOTE (garin @ Jul 24, 2011 - 6:03 P... Jul 24, 2011 - 5:56 PM
garin they do stick out! i figured heat and some pb ... Jul 24, 2011 - 10:09 PM
lagos QUOTE (garin @ Jul 24, 2011 - 11:09 ... Jul 25, 2011 - 8:33 PM
garin QUOTE (lagos @ Jul 25, 2011 - 9:33 P... Jul 25, 2011 - 10:11 PM
garin got one stud out. one more still stuck. i used pro... Jul 30, 2011 - 9:24 PM![]() ![]() |
| Lo-Fi Version | Time is now: February 11th, 2026 - 1:39 PM |