 Weapon-R Intake Issue |
 Nov 21, 2011 - 7:10 PM
|
 
|
 Enthusiast Joined Jun 12, '11 From Suffolk County, NY Currently Offline Reputation: 1 (100%)  |
Hi all,
I installed a new Weapon-R Dragon intake on my 96 GT Liftback yesterday. Initial test drive yielded no issues, and neither did my 40 mile drive to school today. However, on my way home, I registered a Check Engine Light. I haven't checked the code yet, but I plan to tomorrow. Also, I was confused since my stock intake system had places for 3 separate hoses/sensors. There was the PCV hose from the valve cover, the Temperature Sensor, and another hose coming off the back of the intake hose near the throttle. However, on the new Weapon-R, there are only ports for the PCV and the Temp Sensor, there is no third port, and that last hose that was coming from the back of my stock intake is kinda just sitting there, not plugged into anything. Does anyone know what that hose is? Should I just cap it off or let it sit open in my engine bay? Any insight you guys can offer is greatly appreciated! |
Posts in this topic
jt1023 Weapon-R Intake Issue Nov 21, 2011 - 7:10 PM
mandrek that may be it (the sorce of your issue) find wher... Nov 21, 2011 - 7:24 PM jt1023 I have not, I'm going to have my friend check ... Nov 21, 2011 - 7:43 PM mkernz22 I have one on my car and it is fine. Did you reset... Nov 21, 2011 - 8:00 PM
mandrek QUOTE (mkernz22 @ Nov 21, 2011 - 8:0... Nov 21, 2011 - 9:43 PM jt1023 Thanks for the suggestions, I'll do it tomorro... Nov 21, 2011 - 10:52 PM jt1023 So I reset the ECU and air to fuel, but now I idle... Nov 23, 2011 - 3:18 PM mkernz22 is that once it's warmed up?
and when you fir... Nov 23, 2011 - 3:57 PM jt1023 Yes, I let it warm up, then removed the fuses for ... Nov 23, 2011 - 4:17 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 23rd, 2025 - 12:42 PM |