 Kouki Projectors Question |
 Feb 8, 2012 - 10:11 AM
|
 
|
|
Enthusiast  Joined Jan 24, '12 From Maryland Currently Offline Reputation: 2 (100%)  |
Done some research on these but couldn't find the info I was looking for so I'm asking the community for help.
1. To my understanding the USDM low beam bulbs do not fit the projectors (9006 to H4? I think?) so as far as wiring goes do I just take the old wiring off and just resolder to the new ones or do I need a resistor or something in between to get the current down? 2. Does the high beam bulbs the same between USDM and projectors? Thanks -Dave |
Posts in this topic
mechedjun Kouki Projectors Question Feb 8, 2012 - 10:11 AM
richee3 High beam bulbs are both 9005 bulbs. USDM low beam... Feb 8, 2012 - 10:43 AM
mechedjun QUOTE (richee3 @ Feb 8, 2012 - 10:43... Feb 8, 2012 - 10:56 AM smkr3w This is the wrong forum (exterior).
Check the Int... Feb 8, 2012 - 10:49 AM trdproven QUOTE (smkr3w @ Feb 9, 2012 - 1:49 A... Feb 8, 2012 - 7:43 PM smkr3w QUOTE (trdproven @ Feb 8, 2012 - 8:4... Feb 9, 2012 - 1:47 AM mechedjun QUOTE (trdproven @ Feb 8, 2012 - 7:4... Feb 13, 2012 - 8:54 AM richee3 You just buy two halves of the harness and make it... Feb 8, 2012 - 11:01 AM mechedjun QUOTE (richee3 @ Feb 8, 2012 - 11:01... Feb 8, 2012 - 11:04 AM rave2n For mine I just picked up the H1 connector from th... Feb 8, 2012 - 11:19 AM playr158 Ballast only comes into play if you have HIDs Feb 9, 2012 - 2:08 AM smkr3w QUOTE (playr158 @ Feb 9, 2012 - 3:08... Feb 9, 2012 - 2:11 AM richee3 Not all HID kits will let you do that. Some will b... Feb 9, 2012 - 6:25 AM smkr3w QUOTE (richee3 @ Feb 9, 2012 - 6:25 ... Feb 9, 2012 - 9:10 AM trdproven the problem is is that the H1 bulb only has wires ... Feb 9, 2012 - 6:05 PM richee3 QUOTE (trdproven @ Feb 9, 2012 - 5:0... Feb 9, 2012 - 6:37 PM smkr3w took some pics
when i ordered both highs and l... Feb 10, 2012 - 12:40 AM rave2n I think what you are showing in those pictures is ... Feb 10, 2012 - 8:16 AM smkr3w QUOTE (rave2n @ Feb 10, 2012 - 9:16 ... Feb 10, 2012 - 3:13 PM richee3 My DDM kit uses those same plugs. However, at no p... Feb 10, 2012 - 3:28 PM mkernz22 QUOTE (richee3 @ Feb 10, 2012 - 3:28... Feb 13, 2012 - 8:23 AM trdproven SMKRW's kit is incomplete, what actually goes ... Feb 12, 2012 - 10:32 PM smkr3w QUOTE (trdproven @ Feb 12, 2012 - 11... Feb 13, 2012 - 4:37 AM mkernz22 Can you get us some pictures of your lights? Feb 13, 2012 - 9:21 AM mechedjun QUOTE (mkernz22 @ Feb 13, 2012 - 9:2... Feb 13, 2012 - 2:59 PM richee3 My H1's have both power and ground. Feb 13, 2012 - 10:01 AM richee3 They came with the projectors. Feb 13, 2012 - 5:22 PM trdproven but seriously the stock harness meets up with the ... Feb 14, 2012 - 12:02 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 27th, 2025 - 11:11 AM |