6G Celicas Forums

On my 17x7's i have +25 in the front, +30 in the rear.

But i want wider wheels , i hate running 205's.

I have 225's all around; 17 x 7's. I believe I have a 42 offset and I'm running 10mm spacers in the rear and 5mm in the front. I'm not even dropped and I rub whenever I hit decent dips in the road. I rolled the rear quarters myself so it doesn't rub as bad. With the front though, I reinstalled my engine and transmission under panels and it rubs on those when I turn.

This post has been edited by mkernz22: Dec 8, 2011 - 2:33 PM

Yeah, i was just getting at the fact i cant run stretched tires on a 17x7 because i dont want to go smaller than a 205. Should've worded it better, i don't like the balloon tire look.

Cant wait for my next set of wheels, 17x8 +32.

what is the recommended company for spacers?
Is ICHIBA good?

ichiba version 1 hub centric wheel spacers. The studs aren't high quality but they will do the job. I say this because the threading on the ichiba goes all the way too the end. As to where the arp and oem studs don't thread all the way to the end. This is only an advantage if your removing the hub centric wheel spacers with the extended studs to another car so you don't damage the threading. I've had this happen to me before because I didnt use a nut on the end to create a large flat surface.

Hey Bobzai.
I got R17 +35 offset wheels on my celica.
Which spacers would you recommend me to fit it perfect?
Can you post the link where can I buy it?

Thanks in advance.

This post has been edited by Red123: Feb 28, 2012 - 1:27 PM