![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jun 2, '10 From Davenport, Florida Currently Offline Reputation: 0 (0%) ![]() |
earlier i attempted to make a custom phone dock to replace my stereo head unit, but my fabrication skills were lacking. I wanted something cleaner and a little bigger screen size. I bought a acer a100 7" tablet and permantly installed in my dash and so far I love it.
![]() first order of business was using a razor blade to remove plastic ribs and the 2 clips that were preventing the tablet from sitting flush ![]() checking the fit to make sure I could get the whole screen visible within the double din opening the using some double sided mounting tape around the edges of the inside bezel I pressed the tablet into place, hooked up the charger and the headphone jack to the factory amp ![]() ![]() finished product, I should have been a little more careful with the mounting tape, was too close to the edge and is visible, tomorrow I will pull it back out and have the mounting tape a little further from the edge so that it isn't seen better pic in daylight with toyota wallpaper ![]() Update to include parts list 1x Acer A100 Tablet 1x Acer A100 Vehicle Charger 1x 12V Accessory Socket 1x 90 degree 3.5mm to RCA jacks 2x Male to Female RCA 2 way splitter 1x Wiring Harness Adapter for 6 speaker stock amp 1x Volume Control 1x 3M double sided automotive mounting tape This post has been edited by b22ri22an: May 19, 2012 - 4:24 AM -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: June 14th, 2025 - 11:10 PM |