 Turn signal screws are stripping, WTF!? Cheap screws? |
 Apr 26, 2012 - 1:34 AM
|
 
|
 Enthusiast  Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%)  |
Ok. So I have a 1997 Toyota Celica GT and the screws that are holding the turn signals in starts to strip when I try to screw them out. The one on driver side is already stripped from previous owner and the passenger side I tried and it started stripping so I stopped. I am just using a simple hand powered phillips screw. Is there any way to remove it without stripping them? I want to replace the bulbs and now I also want to replace both screws due to stripping.
-------------------- |
Posts in this topic
ILoveMySilly97 Turn signal screws are stripping Apr 26, 2012 - 1:34 AM
marinos You probably have bad screw driver the nose is ver... Apr 26, 2012 - 3:02 PM mkernz22 mine come out well with a stubby phillip's tha... Apr 26, 2012 - 3:04 PM ILoveMySilly97 Okay. Never mind. I found another way around chang... May 11, 2012 - 6:02 PM cheela so you're just never gonna fix that screw? May 12, 2012 - 8:01 AM
ILoveMySilly97 QUOTE (cheela @ May 12, 2012 - 8:01 ... May 12, 2012 - 10:15 AM trdproven get out the screw and get a new one.
the screw is... May 13, 2012 - 10:42 PM xrav22 QUOTE (trdproven @ May 13, 2012 - 11... May 14, 2012 - 12:51 AM ILoveMySilly97 QUOTE (xrav22 @ May 14, 2012 - 1:51 ... May 15, 2012 - 1:55 PM mkernz22 You can use a flat head without needing a dremel. May 15, 2012 - 5:13 PM ILoveMySilly97 QUOTE (mkernz22 @ May 15, 2012 - 6:1... May 16, 2012 - 2:25 AM mkernz22 QUOTE (ILoveMySilly97 @ May 16, 2012 - 3... May 16, 2012 - 8:34 PM ILoveMySilly97 QUOTE (mkernz22 @ May 16, 2012 - 8:3... May 19, 2012 - 4:55 PM HectortheRican BOTH of my turn signal screws are stripped like th... May 16, 2012 - 3:24 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 23rd, 2025 - 10:21 AM |