6G Celicas Forums

Hi everyone, I have a few items left over after my front end conversion. I can guess on some of the things, but on others, I will ask for your help.

As for prices, make an offer and I will respond. The one with the best offered price will get it.

If I happen to sell something, I will be deleting the pictures here so you always know what is available.

Here are the items:

1. IC and Fuel Relay (Sold)
2. Water Injection Pump and Regulator 25 + shipping
3. JDM Water Reservoir 15 + shipping
4. Front Crash Bar 50 + shipping
5. Driver's Side Tail ligth 10 + shipping
6. USDM Stock Front bumper 150 pick up only
7. USDM Stock Hood 200 pick up only
8. USDM Fenders 60 and 70 for the right and left respectively
9. Hood latch for RHD with short hook 15 + shipping
10. Hatch with 3 post spoiler 200 pick up only
11. Two post spoiler 50 pick up only


The following five pictures are of the wiring harness that connects the headlamps, horns, fog lights and everything that is at the front of the car. It is cut at the ends, left and right, as you can see in the pictures.







This is the water injection pump and regulator for the WRC ST-205. It comes with all its connectors. The motors are there, but I think that one is busted. See the pictures




This is a JDM water reservoir.


This is the front crash bar with its supports.


This is the driver's side tail light. It is chipped, but if you have nothing, this would be better than nothing.


This is a USDM front bumper. It is in very good condition. Pearl in color.




This is the USDM stock hood as pictured in both sides. Pearl in color.




Both fenders, passenger side has a small dent at the front by the parking light, here are the pictures for their condition. Driver's side is perfect. Pearl in color.







Hood latch for Right Hand Drive with short hood. This can be used if you did a left hand drive conversion.




Three post hatch with spoiler



Two post spoiler



This post has been edited by JohanFer: Feb 16, 2013 - 2:55 AM

Think you could try and get the bumper shipped overseas to PR?

Is this, Puerto Rico? If so, yes if I find a box large enough to figure out the shipping. It is relatively light so I don't think it will be that expensive to ship. I was really wanting to sell local, but we'll see. Let me figure out the weight in a box, if I find one.

if he dont get it, I want it, if you would ship it to texas? i hate to even ask but ive been to junk yars around me and 6gc's are scarce freaking toyota heaven (big toyota junk yard) wanted 300 for a used front bumper!!!

How much for the hood liner, shipped to 98230?

You have some very good parts worth some good $ FYI.

where in LA are you as im not far from LA i would be interested in your driverside fender if the price is good.

Just a suggestion but I don't think you'll find a box big enough, however you might have success using multiple boxes taped together Let me know! USPS might take it since it's less than 70lbs, you'll have to check size restrictions for shipping by sea (Parcel Post) which is the most economical method.

I'm interested in the pump. Or at the very least the bracket that is on it. Shoot me a PM with a price.

Hey guys, remember thatI asked for offers. I am not capable of coming up with prices. Post them here if you please

On a side note, my high and low beams apparently were thrown away as I cannot find them for the life of me. Sorry



Hi, I really wanted to sell that hood with its liner.



Haha I hope people are able to see that as well. I am asking for people to make offers because I fear overpricing stuff and make people think I am trying to make big money off something worthless. I am, on the other hand trusting people to pay fair prices. But then again, I might be asking too much.

Nevertheless, thank you very much for the information.




I live five minutes away from the junction of the 10 and 605 freeways. Make me an offer.




All right, I will look at the boxes tomorrow that is my day off.


Hi, could you please make an offer?

interested in the horns, would you take 15 shipped to 38305.. the two black horns on the front

$10 for the bracket that is connected to the pump. $40 for pump with bracket. I don't really need the pump as I already have one. I'd just like the bracket so it's easier to mount in the stock location. I'm talking about this one BTW:


This post has been edited by WannabeGT4: Aug 17, 2012 - 7:48 PM

what the helll is wrong with you creating all these sepearte threads leading to your one thread??? your not gonna sell it faster, just be patient. wouldn't doubt if mods delete these.

Not that I am not patient. I did think about it afterwards when I saw them. It was too late. I'll see about deleting them, otherwise, they will make us a favor.

dude chill, with the recent events and all spamming, it just felt right!!!!


would you take my offer on the horns?

free bump

Yes!! Let's do it. I do need to tell you that I checked the horns today after I saw you message to see if they both work. I had to plug them in my car in place of the original and they both honked. Thir sounds are different, but sound much more muffled than the USDM stock. This could be due to my not successfully connecting earth n the car. I tell you this so you are aware, nevertheless, the sound is different.

Send me a pm with your PayPal address you that I can send you an invoice. Thanks!!!

This post has been edited by JohanFer: Aug 18, 2012 - 1:14 AM

Alright, let me know, been searching for one but no cigar.

Im sorry are the fogs preface or not?

Sorry, they are post facelift.

in the picture with the a/c condenser, there is a line that snakes back and forth, as if it is a small heat exchanger made of bent pipe. It's a power steering fluid line in case you were wondering.... mine is busted and took a shot on my clip. That's what I'm interested in if you think you can ship it.