 Help! Broke off part of PCV Valve... |
 Sep 19, 2012 - 11:14 PM
|
 
|
|
Enthusiast  Joined Nov 29, '07 From Colorado Currently Offline Reputation: 4 (100%)  |
I was replacing my PCV valve this afternoon, and had a bit of difficulty getting it out...
Now two things: 1) The new one doesn't fit - the hole is much bigger than the valve. I'd assume this is the mysterious grommet? 2) There's a bit of the old whatever stuck in there. I tried to fish it out to no avail. I'm not too concerned, everything I've seen shows only two very small holes that go from there the PCV valve goes to the rest of the valve cover, unless someone here knows the 5SFE in the Celica is different... Here's a picture of the old PCV Valve: 
This post has been edited by aspen: Sep 19, 2012 - 11:15 PM -------------------- 2019 M2, 2005 S2000, 1997 4Runne
|
Posts in this topic
aspen Help! Broke off part of PCV Valve... Sep 19, 2012 - 11:14 PM
Xander_X 1. The grommet is not mysterious ... it is necessa... Sep 20, 2012 - 9:24 AM seanb The grommet on my daughter's car crumbled in p... Sep 20, 2012 - 2:25 PM ILoveMySilly97 Yea. Don't worry about it. What I did was took... Sep 22, 2012 - 12:11 AM
trdproven If anything from the grommet broke apart and fell,... Sep 23, 2012 - 10:30 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 23rd, 2025 - 6:39 PM |