6G Celicas Forums

As it is written in the title. I need that bracket please. here is a picture thanks let me know!!!!



This post has been edited by BonzaiCelica: Nov 5, 2012 - 11:41 PM

THIEF!!! lol

I wouldn't mind having one either, if somebody overseas happens to come up with a couple. Perhaps I suck at searching but I can't even find a part number for them on ToyoDIY. I found a diagram with the bracket in it but no part number for it.

use one from an ST, not a GT.
Pow.

it all comes as one sub assembly from the looks of toyodiy. also fyi the 3SGE and BEAMS has the same part number

23300P FILTER, FUEL(FOR EFI)
23300-79425

aha hmm can it be the same. Or does the 3sge one look longer?? hmm batman a pretty good guy when it comes to his celica knowledge.



also since richee told me the length of that line is 30 inches (banjo to banjo) I measured it myself to see even with the added few inches from the bracket (too see if it would fit), but doesn't seem like it would.



Then I think of it and say perhaps I'm not supposed to route the fuel hose along the firewall. This is how it is mounted from the factory right?? :





this is what my current line looks like on the fuel rail :



This post has been edited by BonzaiCelica: Nov 6, 2012 - 3:08 AM

yes yours in routed wrong.
here's a pic



The ST one works.

I meant outside to outside of the banjo fittings, total length. Stretch it out and it's 30".




Looks like I'll be ordering an ST bracket!

so richee does that mean I no longer get that fuel line?

Nah, you can have it. It's not doing me any good.

If either of you still need this, I could probably get one at the junkyard. There was a couple 7afe cars last time I went. Let me know.

Ok thx im still waiting for richee response too see if he is still sending it. Ill let u know if my local yards have any

Mods close thx for the help everyone