![]() ![]() |
Mar 7, 2004 - 6:24 PM
|
|
|
Enthusiast ![]() ![]() Joined Jan 16, '03 From Wichita KS Currently Offline Reputation: 0 (0%) |
my car is going insane it ran fine till yesterday then i went to start it and "click" nothing not turning over so i jump it and it runs fine shut it off and it won't start again, so i think alternator, battery, starter, i pull the battery and alternator and they check out. put it all back together and it starts right up over and over.
but nothing works no tach no lights nothing electrical. is this a fuse or is it grounding out somewhere or what i'm clueless and frustrated. any help would be appreciated |
Mar 7, 2004 - 7:33 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Nov 26, '02 Currently Offline Reputation: 0 (0%) |
Could be your security system.
Try this disconnect your battery thingy put your keys in the ignition turn it all the way but don't start the car put the battery ring thing back onto your battery now move your key in the ignition counterclockwise all the way to the left now turn on the ignition This post has been edited by hioctane: Mar 7, 2004 - 7:34 PM |
Mar 7, 2004 - 8:15 PM
|
|
|
Enthusiast ![]() ![]() Joined Jan 16, '03 From Wichita KS Currently Offline Reputation: 0 (0%) |
i found a blown fuse now and i can't get it out its a blue 100 amp fuse and i have pulled as hard as i can and it won't come out is there something special you have to use.
because the others come out just fine and this one has given me tons of grief |
Mar 7, 2004 - 8:45 PM
|
|
|
Enthusiast ![]() ![]() Joined Jan 16, '03 From Wichita KS Currently Offline Reputation: 0 (0%) |
also does anyone know if our cars have an external or internal volage regulator
|
Mar 8, 2004 - 11:31 AM
|
|
|
Enthusiast ![]() ![]() Joined Mar 2, '04 From Louisiana, USA Currently Offline Reputation: 2 (100%) |
Internal voltage reg.
|
Mar 9, 2004 - 8:17 PM
|
|
|
Enthusiast ![]() ![]() Joined Nov 4, '03 From Vancouver, Canada! Currently Offline Reputation: 0 (0%) |
thats the alternator fuse...those things have a special way of being removed....but i dont remember
|
Mar 9, 2004 - 10:38 PM
|
|
|
Enthusiast ![]() ![]() Joined Jan 16, '03 From Wichita KS Currently Offline Reputation: 0 (0%) |
ya i figuredi t out you have to remove the box and then undo two screws. i'm an idiot
|
![]() ![]() |
| Lo-Fi Version | Time is now: January 15th, 2026 - 11:30 PM |