![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jun 13, '03 From brooksville,fl Currently Offline Reputation: 0 (0%) ![]() |
can some one please give me a link or a website that carries a flywheel for the 97 celica st
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 27, '02 From UK Currently Offline Reputation: 1 (100%) ![]() |
NOPI online Catalogue
Clutch/Transmission Flywheel Clutch Master Lightened Flywheel - 4cyl 1.8L Eng - Billet ALUMINUM or Competition Clutches Flywheel - 4cyl 1.8L - Lightweight Aluminum BUT THEY ARE NOT CHEAP! http://129.33.208.33/ecat2004/dsp_parts.cf...20Celica%201997 |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 22, '04 From bellingham, WA Currently Offline Reputation: 0 (0%) ![]() |
if you just want a stock 6 bolt flywheel, then let me know... i have a spare 4/7a-fe flywheel here which was used for only about a year.... i do have a picture and there's TONS of life in it.... all of the teeth on it are perfect.... I don't need it for i did a 4a-ge swap (which uses an 8 bolt flywheel....)... oh yeah... i'm asking $30 US for it (picture here: http://www.cardomain.com/memberpage/219038/10 )
heh.... if you even want... i'll have coomer come over and inspect it for ya ![]() This post has been edited by toyotaspeed_90: Mar 18, 2004 - 3:36 AM |
![]() |
|
Enthusiast ![]() Joined Jun 13, '03 From brooksville,fl Currently Offline Reputation: 0 (0%) ![]() |
HOW BOUT THAT STRUT BAR DOES THAT FIT MY ST ILL BUY THAT OFF U
|
![]() |
|
Enthusiast ![]() ![]() Joined Jan 22, '04 From bellingham, WA Currently Offline Reputation: 0 (0%) ![]() |
no.... celica's use a 4 bolt upper strut, and the corollas use a 3 bolt
|
![]() |
|
||
![]() Enthusiast ![]() ![]() ![]() Joined Sep 27, '02 From UK Currently Offline Reputation: 1 (100%) ![]() |
Not on mine it doesn't! I have a 3 bolt upper struct pattern front and rear. |
||
![]() |
|
||||
Enthusiast ![]() ![]() Joined Jan 22, '04 From bellingham, WA Currently Offline Reputation: 0 (0%) ![]() |
what year do you have? Coomers car (ST).... he doesn't have a bar either and i pulled it off the wall (cause that's where i keep it) and the bolt patterns were WAY off (couldn't even redrill holes in the ends for it) and used a 4 bolt pattern in the front..... |
||||
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 9:47 AM |