Bunch of New Pictures! System + Rims, 56k Warning Options

[Guest_Jason_*]

[Guest_Jason_*]

[Guest_Jason_*]

... these were taken about 30 min ago. Since the image restrictions didn't allow me to post them all in one post, I needed seperated. Anyways, it would be nice to have a "6gc.net" sticker on there as well. Enjoy!

[Jussimple]

DDDDDDDDDDDAAAAAAAMMMMMMMMNNNNNNNN, that's rock solid. Ride is looking tight. Makes me want to step up my mods so I can finaly pimp some new pics in here. Thats some clean audio work, if you did your self then how-to it up. In any case, sweet ride.

This post has been edited by Jussimple: Feb 4, 2003 - 4:19 PM

[all4sho94st]

DAmn Nice set up , What kinda wheels are those and how much, so hows the sound system thupping? i like the wingless look. how'd you cover up the holes?

[Guest_Jason_*]

Rims: 18" Arospeed RS-GT 1,300$ w/ free S&H

The system hits real hard, those are both 1000w AMPS. I covered the wholes using Bondo. Then I sanded them down to the point I could really go anymore without scratching the paint and then just used some Silver Touch-up Paint to give them a little color. Works fairly well - since i'm getting all my body work done at once... Blitz Kit, Taillight Conversion, Gunmetal Paint etc...

[x_itchy_b_x]

every thing looks tight. the system setup is so clean and nice. the car is clean. love the rims. just one suggestion paint ur drum brake housing or sumthing the rusted look kinda turned me off. other than that i love it dont get me wrong

[Guest_Jason_*]

I know, i have the high temp paint already to paint the Calipers and Drums. Its just to cold still. I'm painting them blue, since my underglows are going to be blue and my engine is going to be blue.

[0Re0]

sweet setup

[ghostdog]

hot as hell

[Seth6Gen]

are you going to lower it? also hit these up. Also i like the wingless and windshield bannerless look. clean and butter. yummy

This post has been edited by Seth6Gen: Feb 4, 2003 - 10:07 PM

[dayzdchika]

what a sexy celica ..... now it matches the driver!

[slowceli]

dude looks sweet but i hate to tell you this but filling holes in with bondo will not last. dont be surprised if the vibration breaks out the bondo. i work at a body shop for a couple of years and i have seen alot of people try to do that and it never works. but other than that your celi looks tight

[Guest_Jason_*]

QUOTE

what a sexy celica ..... now it matches the driver!

Shhhh.. the last thing I need is ppl sending me "a/s/l" messages on AIM!

QUOTE

i hate to tell you this but filling holes in with bondo will not last.

Yea I know, its just temporary until I get my body work done which should be soon. Just to keep the rain/snow out.

[FallenHero]

What kind of spoiler are you going to get?

[Black97]

That's really sweet, good job man. Like everybody else was sayin, it looks good with no spoiler like that , and I was gonna say somethin about lowering it. Nice car, beat my E 12's and 600w amp lol

[Coomer]

Nice car man! Those rims and that system are sweet!

Do you plan to lower your car at all?

[doGGy]

Nice Celi man!!! Keep up a good work..

[Guest_Jason_*]

Yea i'm definitly going to lower. I still don't know how low.. 1.5" or 2". I figured i'd wait till I got my kit on (still waiting on this blitz style kit..).

Edit: I'm not putting a wing on it.

This post has been edited by Jason: Feb 5, 2003 - 9:30 AM

[rlan214]

nice dude lovin ure rims

[rlan214]

QUOTE (burningcelica @ Feb 4, 2003 - 8:20 PM)

dude looks sweet but i hate to tell you this but filling holes in with bondo will not last. dont be surprised if the vibration breaks out the bondo. i work at a body shop for a couple of years and i have seen alot of people try to do that and it never works. but other than that your celi looks tight

what do you use to fill out holes then.... like when ure tyring to shave ure emblem

[rlan214]

QUOTE (rlan214 @ Feb 5, 2003 - 7:43 AM)

QUOTE (burningcelica @ Feb 4, 2003 - 8:20 PM) dude looks sweet but i hate to tell you this but filling holes in with bondo will not last. dont be surprised if the vibration breaks out the bondo. i work at a body shop for a couple of years and i have seen alot of people try to do that and it never works. but other than that your celi looks tight what do you use to fill out holes then.... like when ure tyring to shave ure emblem

pahina 2

[CDNSLEEKA]

Looks really good man.You should be really happy once you get your kit on.

[Blur]

Wow man, i'm impressed, that's a hella nice setup. That must bump like a madman.

[Guest_Matthew_*]

how much was everything. Box,wiring, subs, amp, capacitor, etc.

[Mizuryu]

extremly tight man....i'm lovin' the system...

[slowceli]

hey rlan214 any time you feel a hole you must first remove the paint a couple of inches all the way around the hole and then use a low temp mig welder. if its a small hole it will only need a spot weld. if it is a large hole such as a radio anttena then you have to cut a piece of sheet metal slightly bigger than the hole and tape it to the backside of whatever it is your feeling and then weld the outside of it. after you are done welding it just take a grinder to it and knock the weld down then you can use your bondo to fill the grinder marks, prime ,paint and your done. if any of you have any ?s regarding body work or paint send me a pm.

[95STCelica]

looks good man. i have the same color celica, i am putting 18s on soon...(sig is photochopped) and i have my celica.net sticker in the same place as you...hotness...looks clean as hell..get clear sidemarkers

[celicaBEst]

i'm really feelin' those 18's man...car looks very sharp. can't wait to see it dropped w/ the kit on.

[jayi12-15psi]

Just my personal recommendation, but if you plan to get a new spoiler, get the hiro, I've got one, havn't put it on yet, but it looks sweet

[Guest_Jason_*]

Well i'm going to wait till I get my kit on and lowered before I put a wing. I'm not a big fan of wings, I think cars look cleaner without them, but some look good either way. I just got a call today from Extreme Dimensions telling me my "Blitz Style" kit should be here monday, so i'm excited and i've got the Digicam all ready for pictures.

[Guest_Matthew_*]

hey man how much for that kit and do you have a link?

[Guest_Jason_*]

$485 w/S&H (its only the front bumper)
www.extremedimensions.com

[pleue]

Looks real nice. I think you should go with red caliper paint and red under body/ engine dressup to match the red of your system (alpine and mtx stuff). Just my opinion though. What do you think of your type r's? I'm debating with going with 1 12" type r or a 12w6 in a sealed box. Lemme know. Looks great good luck with the kit.

[Guest_Jason_*]

The Type-R's bang some serious bass. They hit everything perfectly, the high-pitched bass and the D-Bass. Honestly, its to the point that it seriously hurts your ears. If you stand outside the drivers window and put your head in or your hand, you can feel it pushing your head/hand out... its crazy. You can't sit in the car with the volumn above 30 because its hits so hard (my volume is 0-60), and stock the volumn use to hang around 35-40ish.

[0Re0]

QUOTE (CDNSLEEKA @ Feb 5, 2003 - 2:18 PM)

Looks really good man.You should be really happy once you get your kit on.

werd....you'll be the first to be having the blitz kit


This post has been edited by 0Re0: Feb 8, 2003 - 6:47 PM

[Guest_Jason_*]

YES I KNOW.

I'm trendy. j/k

I'm very excited, i've always been wanting a Blitz kit, have hounded the people who claim they can get a custom kit made, but I finally got what I want! Now we just need a Blitz Rear Bumper, because I hate all the current ones.

[0Re0]

QUOTE (Jason @ Feb 8, 2003 - 11:21 PM)

YES I KNOW. I'm trendy.   j/k I'm very excited, i've always been wanting a Blitz kit, have hounded the people who claim they can get a custom kit made, but I finally got what I want!  Now we just need a Blitz Rear Bumper, because I hate all the current ones.

Hope it fits perfectly and good luck on putting on. My TRD kit installation is a b itch. I had to bend the fenders in alittle to fit the lip into place.

This post has been edited by 0Re0: Feb 9, 2003 - 1:46 AM

[0Re0]

Looks like a polyurethane kit. The top of the bumper sagging back with no support to hold it up. Damn...I want one now....LOL

[0Re0]

QUOTE (0Re0 @ Feb 8, 2003 - 11:58 PM)

Looks like a polyurethane kit.

or am I wrong?

[Guest_Jason_*]

Yea it does though.

I'm already picturing having my intercooler sitting right in there.. *drools*