3s-gte swap, What all do i need to do this right? Options

[Mousetrashdiver]

I did a search and it didnt answer my question.

I want to know what all you need to do the 3s-gte swap correcty and still have my AC work(heard some where that the ac doesnt work after the swap is done)

EVERYTHING that i would need.

Thanks,
LEB

[Drocay]

to date that hasn't been posted on what all u need. But ask Chrobis
or Mike(qatar) they should have the answer your looking for.

[Mousetrashdiver]

HMMM i went to the first ones profile it didnt look like his swap was done and the 2nd one i couldnt find. but can anyone else help?

[Drocay]

Chrobis for his swap check genral discussion forum for complete pics he just finished. and mike he owns TopShelfRacing.com and is the guy who does the wiring for about 98% of the people who have the swap.

[Mousetrashdiver]

yeah thanks i found him(mike) after i posted it, and i will look thanks Drocray. Are you the one that told me about 6gc?

[Drocay]

Ya i think so. it was off of twistedmods.com right.

This post has been edited by Drocay: Apr 16, 2004 - 3:38 AM

[Mousetrashdiver]

yeah something like that...
but thanks so much...for everything

[Supersprynt]

Theres an entire thread about people who did swaps...FYI

also, its not that you NEED anything, its you gotta connect a few things.
Last I heard you just need to run a power line to the condenser and u'll be golden. But you'll have to turn on the condenser with a switch and then the fan seperately. Perhaps ghetto, but a solution.

[Chrobis]

My a/c works, and the throttle compensates for it, which is whats supost to happen, because if the throtttle dosnt compensate the a/c can draw a little to much power and make it hard on the engine, and make idle very rough, if not maybe even make the car stall.